With this preset method, that'd mean that you're restricted to running
one module per instance of VMR, right? Is there much of a difference
in terms of resources if you run a few instances instead of the
expected usage of chaining multiple modules within one instance? I
haven't sprung for any Slate stuff beyond Trigger yet, but I like what
I've heard and have enough sighted help available at the moment to get
stuff set up.
Scott
On 5/7/15, Brian Casey <br...@wavefieldrecordings.com> wrote:
> Thanks for that, they are thhe exact steps I'm taking but no
luck. Selecting
> regions to nearest transients etc are all working just fine.
>
> Thanks for your response on slate vmr also, very helpful, I mostly want it
> to try reviver but its good to know that the parameters show once the
> modules are in place with a preset.
>
> Sent from my smart-ish phone!
>
>> On 7/05/2015, at 3:10 pm, mcdiemert . <mcdiem...@gmail.com> wrote:
>>
>> Brian,
>> Let's say you have two markers, and you want to select everything
>> between marker 1 and marker 2. First Go to marker 1 by pressing period
>> one period on the numeric keypad. To select up to marker two, you
>> would hold down shift, and press period 2 period again from the
>> numeric. HTH
>>
>>
>>
>>
>>> On 5/6/15, Brian Casey <br...@wavefieldrecordings.com> wrote:
>>> Quick nav did catch me a few weeks ago but vo is set to normal, I can
>>> jump
>>> to markers as normal.
>>>
>>> I'm getting by with creating region breaks and selecting that way for
>>> the
>>> moment, searching in preview in the shortcut guide isn't giving me any
>>> results relating to selecting to the next or previous memory location,
>>> only
>>> shortcuts relating to creating and moving to memory locations, I'm still
>>> assuming its something I'm doing wrong rather than something changing in
>>> pt
>>> 12.
>>>
>>> Thanks for the suggestions,
>>> Brian
>>>
>>> Sent from my smart-ish phone!
>>>
>>>> On 6/05/2015, at 1:42 pm, mcdiemert . <mcdiem...@gmail.com> wrote:
>>>>
>>>> do you have quick nav, or quick keys turned on by chance?
>>>> Are you able to jump between markers?
>>>>
>>>>
>>>>
>>>>> On 5/6/15, Brian Casey <br...@wavefieldrecordings.com> wrote:
>>>>> Yup, all transport mode stuff works from the num pad
>>>>>
>>>>> Sent from my smart-ish phone!
>>>>>
>>>>>> On 6/05/2015, at 4:14 am, Poppa Bear <heavens4r...@gmail.com> wrote:
>>>>>>
>>>>>> Bryan, can you still use 3 on the numb pad to start record.
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On
>>>>>> Behalf Of Brian Casey
>>>>>> Sent: Tuesday, May 05, 2015 2:27 PM
>>>>>> To: ptaccess@googlegroups.com
>>>>>> Subject: Re: Changing parameters in AAX plug-ins in PT 12
>>>>>>
>>>>>> I've now found that the issue was check boxes in preferences not
>>>>>> being
>>>>>> read correctly by Voice over, wonder if this is normal?
>>>>>>
>>>>>> Can't figure why key strokes for selecting between markers aren't
>>>>>> working
>>>>>> when other selection key strokes like shift return etc are.
>>>>>>
>>>>>> Sent from my smart-ish phone!
>>>>>>
>>>>>>> On 5/05/2015, at 9:18 pm, Poppa Bear <heavens4r...@gmail.com> wrote:
>>>>>>>
>>>>>>> Bryan, some have found that they have an automation box checked and
>>>>>>> it
>>>>>>> is
>>>>>>> affecting the parameter changes. I am not using version 12 so I can
>>>>>>> not
>>>>>>> directly help. I hope that somebody who has kept track of this issue
>>>>>>> can
>>>>>>> assist.
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com]
>>>>>>> On
>>>>>>> Behalf Of CaseyBrian Casey
>>>>>>> Sent: Tuesday, May 05, 2015 11:15 AM
>>>>>>> To: ptaccess@googlegroups.com
>>>>>>> Subject: Changing parameters in AAX plug-ins in PT 12
>>>>>>>
>>>>>>> Hi all, back on this topic I am still unable to adjust plugin
>>>>>>> parameters
>>>>>>> in a plugin using Voice Over which I gather shouldn't be a problem.
>>>>>>>
>>>>>>> I think Slau may have taken me up wrong, I'm not trying to write
>>>>>>> automation or anything, just change values of parameters.
>>>>>>>
>>>>>>> For example I changed the polarity of a track using the trim plugin
>>>>>>> but
>>>>>>> after changing the parameter it reverts to its original state when I
>>>>>>> next
>>>>>>> resume playback.
>>>>>>>
>>>>>>> I have tried changing some of the prefs relating to automation and
>>>>>>> tried
>>>>>>> turning off all automation but no joy. Fyi I aim to install a
>>>>>>> bcf2000
>>>>>>> for
>>>>>>> controling plugs but I'm not sure that will change this behaviour.
>>>>>>>
>>>>>>> To avoid clogging the list, I will also quickly mention that using
>>>>>>> shift
>>>>>>> and period on the num pad is for some reason not selecting to the
>>>>>>> next
>>>>>>> memory location as it should, also command and 5 is not opening the
>>>>>>> memory locations window for me and I have to go via the menus to
>>>>>>> find
>>>>>>> it,
>>>>>>>
>>>>>>>
>>>>>>> Any ideas on this are greatly appreciated, having gone through many
>>>>>>> tutorials and looking through pt documentation it seems certain
>>>>>>> things
>>>>>>> are not appearing/working as they should.
>>>>>>>
>>>>>>> Brian.
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups
>>>>>>> "Pro Tools Accessibility" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send
>>>>>>> an
>>>>>>> email to ptaccess+unsubscr...@googlegroups.com.
>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are subscribed to a topic in
>>>>>>> the
>>>>>>> Google Groups "Pro Tools Accessibility" group.
>>>>>>> To unsubscribe from this topic, visit
>>>>>>> https://groups.google.com/d/topic/ptaccess/n3ErriKAw1w/unsubscribe.
>>>>>>> To unsubscribe from this group and all its topics, send an email to
>>>>>>> ptaccess+unsubscr...@googlegroups.com.
>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups
>>>>>> "Pro Tools Accessibility" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send
>>>>>> an
>>>>>> email to ptaccess+unsubscr...@googlegroups.com.
>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to a topic in
>>>>>> the
>>>>>> Google Groups "Pro Tools Accessibility" group.
>>>>>> To unsubscribe from this topic, visit
>>>>>> https://groups.google.com/d/topic/ptaccess/n3ErriKAw1w/unsubscribe.
>>>>>> To unsubscribe from this group and all its topics, send an email to
>>>>>> ptaccess+unsubscr...@googlegroups.com.
>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups
>>>>> "Pro Tools Accessibility" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an
>>>>> email to ptaccess+unsubscr...@googlegroups.com.
>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>>
>>>> --
>>>> Warm Regards:
>>>> Matt Diemert
>>>> 330-980-0046
>>>>
>>>> --
>>>> You received this message because you are subscribed to a topic in the
>>>> Google Groups "Pro Tools Accessibility" group.
>>>> To unsubscribe from this topic, visit
>>>> https://groups.google.com/d/topic/ptaccess/n3ErriKAw1w/unsubscribe.
>>>> To unsubscribe from this group and all its topics, send an email to
>>>> ptaccess+unsubscr...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>
>>
>> --
>> Warm Regards:
>> Matt Diemert
>> 330-980-0046
>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "Pro Tools Accessibility" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/ptaccess/n3ErriKAw1w/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.