thanks Slau. i’ll give it a run. Steve > On 10 Aug 2015, at 11:57 pm, Slau Halatyn <slauhala...@gmail.com> wrote: > > Hi Steve, > > OK, I've confirmed what I suspected. Yes, you most definitely have to > double-click the bus name in the bus table in the Bus tab of the I/O Setup. > Keep in mind that pressing Control-Option-Space Bar twice will not achieve a > double-click in this case. You must make sure your mouse pointer is routed to > the VoiceOver cursor either by tethering it or moving it with > Control-Option-Command-f5 and then performing a double-click with either a > mouse or track pad. After typing the name, press Return and you should see > the change in the bus table and, of course, your I/O menus in each track. > > Slau > > On Aug 9, 2015, at 11:09 PM, Steve Sparrow <i...@sparrowsound.com.au> wrote: > >> ok thanks Slau. >> I did not realise you could creat a new bus on the fly like this. so this >> maybe the go. i’ll have a look at this also. >> Steve >> >>> On 10 Aug 2015, at 12:53 pm, Slau Halatyn <slauhala...@gmail.com> wrote: >>> >>> Well, for starters, you absolutely have to do this from the I/O Setup >>> window. Once it's opened, hit Command-3 to select the busses tab, navigate >>> to the busses table and go to the bus you want to rename. Route the mouse >>> pointer and double click, type the new name and hit Return. Frankly, I >>> can't remember if perhaps you might even be able to do a simple click and >>> rename but I'm pretty sure you'll still need to do a double-click to rename >>> these days. It's been a while since I've renamed a bus this way. These >>> days, I tend to name busses on the fly when creating new Aux tracks. >>> Anyway, let's see if that works for you. Otherwise, I'll confirm in the >>> morning, my morning, that is ;) >>> >>> Slau >>> >>> On Aug 9, 2015, at 10:40 PM, Steve Sparrow <i...@sparrowsound.com.au> wrote: >>> >>>> should you be able to do this within each track, for example. interact >>>> with the track, and go to the bus name, then vo space on it. >>>> >>>> i’m assuming this is the key command you suggest using for double clicking. >>>> or will i need to go to the i o set up and find the bus name that way. for >>>> what it’s worth, when i interact with the track and find the bus name, >>>> then double click it just seems to bring up the list of outputs. i will >>>> have a look in the i o set up window, but i didn’t seem to have a lot of >>>> luck with it. i’d be interested to know how you carry out this task, so if >>>> you get a chance to have a look, that would be great Slau. >>>> Thanks again. >>>> steve >>>> >>>>> On 10 Aug 2015, at 12:29 pm, Slau Halatyn <slauhala...@gmail.com> wrote: >>>>> >>>>> Hi Steve, >>>>> >>>>> I'm not at the studio right now so I can't answer definitively now but, >>>>> normally, one would double-click on the bus name to create an edit text >>>>> field and type the new name, press Return and that should do it. If >>>>> you're getting a click on the Apple menu, it sounds to me like there's >>>>> possibly another window blocking the I/O Setup window. Double-check that >>>>> you have no other windows open and try double-clicking the bus name. If >>>>> you have no luck, I'll check it out when I get back to the studio >>>>> tomorrow morning. >>>>> >>>>> Cheers, >>>>> >>>>> Slau >>>>> >>>>> On Aug 9, 2015, at 9:56 PM, Steve Sparrow <i...@sparrowsound.com.au> >>>>> wrote: >>>>> >>>>>> Hey guys. I’ve seen a post about this, but i must be mis understanding >>>>>> something. >>>>>> I am trying to rename some buses in p t. I think i remember Slau saying >>>>>> somewhere to right click on the bus name, so i did a v o shift space in >>>>>> the bus name, but nothing seems to happen. I then went in to the i o set >>>>>> up and went in to the bus tab, and bus set up, found my bus, and vo >>>>>> shift space again on the name, but it just seem to take me in to the >>>>>> apple menu, I did also try v o shift m, but i can’t seem to rename the >>>>>> bus, am i doing something wrong, or is there another method. >>>>>> Steve >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Pro Tools Accessibility" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to ptaccess+unsubscr...@googlegroups.com. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout.
-- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
