Hi Darwin, I can't remember the default behavior of the 003 when booted up but I would check whether the inputs default to Mic rather than Line. If you're plugging in a bass into the D.I. you'll probably need to switch that input channel from Mic to D.I.
Cheers, Slau On Nov 20, 2015, at 9:32 PM, Darwin May <dmay...@gmail.com> wrote: > Hello everyone, thanks for all the advice, I happened to now have sound > thanks to the demo that slau found for me. I did not really have to change > anything the only issue I seem to be having, is when running my base guitar, > keyboard, or something else through the mixer and not getting any sound. What > I am referring to as running through the mixer is plugging in to the inputs > of the back of the mixer and sending it out to ProTools and back. > > Sent from my iPhone > >> On Nov 20, 2015, at 7:56 PM, Vaughn Brown <jazzdress...@gmail.com> wrote: >> >> It depends on if you want the system sound to play through the >> speakers associated with the sound interface. >> Yes, it is under setup, far too the right in the menu. >> Vaughn >> >>> On 11/20/15, TheOreoMonster <monkeypushe...@gmail.com> wrote: >>> You may have to go into I/o Settings as well delete the inputs and >>> outputs and set to defaults as well. >>> >>>> On 11/20/15, Darwin May <dmay...@gmail.com> wrote: >>>> I went to the general playback under the settings menu, and the Digi 003 >>>> is >>>> the playback. >>>> >>>> Sent from my iPhone >>>> >>>>> On Nov 20, 2015, at 12:51 PM, TheOreoMonster <monkeypushe...@gmail.com> >>>>> wrote: >>>>> >>>>> It's not usually recommended to use the same interface as your mac >>>>> audio interface and your protools interface. In system preferences > >>>>> sound >input and outputs you want to leave those set to your defaults >>>>> or something else. In pro tools you will need to select the pro >>>>> tools interface under playback device. i believe this is under the >>>>> set up menu. >>>>> >>>>>> On 11/20/15, Vaughn Brown <jazzdress...@gmail.com> wrote: >>>>>> OK, >>>>>> >>>>>> You may find the solution under the Mac's sounds, output and input. >>>>>> See if your Mac can see your this device. Set it as default. Then look >>>>>> in Protools under set up hardware. You may have to get Protools to >>>>>> "see" the device, too. >>>>>> >>>>>> I hope this helps. >>>>>> Vaughn >>>>>> >>>>>>> On 11/19/15, Slau Halatyn <slauhala...@gmail.com> wrote: >>>>>>> Hi Darwin, >>>>>>> >>>>>>> Just saw that you posted this message here before we had communicated >>>>>>> off-list. Another approach you can take to eliminate variables and >>>>>>> make >>>>>>> sure >>>>>>> you're getting signal to begin with is to create an aux track and >>>>>>> instantiate a signal generator plug-in. The generator will >>>>>>> automatically >>>>>>> come up generating a tone. That way, you're sure to have a signal >>>>>>> coming >>>>>>> through and work on getting your monitor out confirmed. Also, BTW, >>>>>>> make >>>>>>> sure >>>>>>> your playback engine has the 003 set to be the output. After that's >>>>>>> sorted >>>>>>> out, you'll probably want to go through the "Getting Started" pdf >>>>>>> manual >>>>>>> to >>>>>>> get oriented. Keep us posted on your progress. >>>>>>> >>>>>>> Slau >>>>>>> >>>>>>>> On Nov 19, 2015, at 10:37 PM, Darwin May <dmay...@gmail.com> wrote: >>>>>>>> >>>>>>>> Hello, guys, I am a person who is new at pro tools, I got a 003 >>>>>>>> consul >>>>>>>> and >>>>>>>> I am trying to get sound through it to the ProTools software. At the >>>>>>>> current moment I am running ProTools 11.3, I am waiting on my order >>>>>>>> of >>>>>>>> the >>>>>>>> official ProTools to come in, so I am using the demo version as of >>>>>>>> right >>>>>>>> now. The situation is as follows, I am using a 003 surface controller >>>>>>>> I >>>>>>>> have two cables running from powered monitor speakers to the monitor >>>>>>>> jacks >>>>>>>> on the back, then I have my keyboard running into channel 1, I have >>>>>>>> all >>>>>>>> drivers and software installed on my MacBook pro, such as the 003 >>>>>>>> family >>>>>>>> driver and of course ProTools. I have my channel 1 going to input one >>>>>>>> mono >>>>>>>> and on the output part of the track I have set Output one, sorry if >>>>>>>> sounds >>>>>>>> silly. I am new with ProTools I have always use logic in the past. >>>>>>>> Any >>>>>>>> help would be greatly appreciated. >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups >>>>>>>> "Pro Tools Accessibility" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send >>>>>>>> an >>>>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups >>>>>>> "Pro Tools Accessibility" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>> an >>>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>>> >>>>>> -- >>>>>> Vaughn Brown >>>>>> Berklee College of Music Graduate, Bachelor in Music, Drummer, educator >>>>>> 504-202-8492 >>>>>> http://www.vaughnbrown.net >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups >>>>>> "Pro Tools Accessibility" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an >>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> >> -- >> Vaughn Brown >> Berklee College of Music Graduate, Bachelor in Music, Drummer, educator >> 504-202-8492 >> http://www.vaughnbrown.net >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
