Hi all, Hope you are doing well!
I realize this may be a bit off-topic, I apologise for that, but I think you are the people who knows this best. :) We have a bigger studio here in town, with several patches and pre-amps. We want to build a map or diagram of the studio, so that one who's totally blind can get a picture of how the studio is built and the relation between each element. As an example, we want to show that the microphone cable should go to a specific input in the patch in the recording room, then from the relevant patch channel in the control room to the pre-amp, and then from the pre-amp to the right channel on the mixer. I hope you understand what we are trying to do. :) Do you have any suggestions on how we could do this? We thought about writing an Excel document with all elements, but since the screen reader only reads one cell at a time, it still becomes very hard to navigate around and to get an understanding of the relation between everything. Thanks very much in advance for your help! All the best! Kind regards, Niklas -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/AM9P189MB16656A157F9099B55E6E72CC9C849%40AM9P189MB1665.EURP189.PROD.OUTLOOK.COM.
