Hi Martin, thanks for the reply and info. I did not realise that there was a button that I needed to press to start the trial. I am away for the weekend but will have a go when I am back. Sounds like a great way to isolate and remove background noise and I like the idea you get 3 separate tracks too. Cheers, Toby
On Friday, 17 April 2026 at 06:00:18 UTC+1 Martin (Punky) Sopart wrote: > Hello Toby! > > After installing the Hush Pro plug-in you also have to start your 21 day > trial. > > Open the plug-in via the audio suite menu. > Then use VOCR to read the plug-in's window. > You'll find a button to start the trial. > Mouse click that button. > Then close the Plug-in window. > > Now back in the session create 3 audio tracks below that one you want to > process and select all 4 tracks. > *Make sure that the 3 additional audio tracks have the same number of > channels the source track has. > > After that select an audio clip in the source track or the whole track. > > Open the plug-in "Hush Splitt" via the audio suite menu and press the > render button. > > After the processing you can close the plug-in window and the 3 additional > audio tracks will contain the splitts for Voice, reverb and noise. > > Does that work for you? > > Best wishes!/ Martin > -----Original Message----- > From: [email protected] <[email protected]> On Behalf Of > Toby Davey > Sent: Thursday, April 16, 2026 10:38 PM > To: Pro Tools Accessibility <[email protected]> > Subject: Re: Editing podcasts > > Hi Martin, > I downloaded the trial version of Hush Pro as I was keen to give it a go > too. > How did you find working with the parameters within the plugin as I was > able to adjust the values but when I VO spaced on an item to turn it on or > off I did not seem to get any response from VoiceOver. > If you had the time it would be good if you could do a bit of a demo on > using Hush Pro. > I tried using it via Audio Suite and as a plugin too. > It could be me though! > cheers, > Toby > > On Thursday, 16 April 2026 at 09:23:35 UTC+1 Martin (Punky) Sopart wrote: > > > Hello Slau, Peter and all the others! > > Yesterday I installed the Hush Pro trail and the results are amazing. > I don't think that RX11 will make a better job. > And the handling of Hush Splitt is that simple. > > Do you further know a solution for isolating background noise out of > musical content? > That does not work with Hush Pro and Moises. > I have to isolate nature background noises out of an acoustic outdoor > recording. > Both Hush Pro and Moises strip out the guitar hits/slaps onto the noises > track. > > Best wishes! / Martin > -----Original Message----- > From: [email protected] <[email protected]> On Behalf Of > Slau Halatyn > Sent: Wednesday, April 15, 2026 4:57 PM > To: PTAccess List <[email protected]> > Subject: Re: Editing podcasts > > That's exactly how Hush Pro works but with the added benefit of an Audio > Suite version. Leaving town and going dark for a few days. Cheers! > > > On Apr 15, 2026, at 10:44 AM, Peter Bosher <[email protected]> > wrote: > > > > Hi Martin, > > > > > > One other plug-in you might try is Supertone Clear. It allows you to > isolate or balance three elements separately, voice, background noise and > ambience/reverb, so for example you can solo the voice element or reduce or > almost eliminate reverb. Many colleagues recommended it and I've used it > recently to good effect. I've also used RX for this so it's horses for > courses, but definitely worth a look. There's a free trial version which > inserts noise every thirty seconds before you register it. It's here: > > > > https://supertone.ai/en/clear/ > > > > > > Best, > > > > > > Peter > > > > > > > > On 14/04/2026 19:03, Martin (Punky) Sopart wrote: > >> Hello Slau! > >> > >> Thanks for helping. > >> > >> I already own a license of RX 10 Std. Is it worth to upgrade to 11 > regarding the podcast thing or is Hush Pro the better solution here? > >> Checking the web Hush sounds promising. > >> > >> For separating vocals, guitars etc. out of music tracks I'm using > Moises Pro with very good success, but Moises doesn't work for separating > background noises out of spoken content. > >> > >> Best wishes! / Martin > >> -----Original Message----- > >> From: [email protected] <[email protected]> On Behalf Of > Slau Halatyn > >> Sent: Tuesday, April 14, 2026 7:30 PM > >> To: PTAccess List <[email protected]> > >> Subject: Re: Editing podcasts > >> > >> HI Martin, > >> > >> The tools I would look at are Izotope RX or Hush Pro. With rX, the > Dialog Isolate or Music rebalance work well (although with Music Rebalance, > you have to use VOCR to change the levels). Hush Pro comes as either a > stand-alone version or Audio Suite (which is a bit more expensive) but it > does a great job. If you have a 30-second clip of a typical file, I can > process it in a few ways and share the result with you. I'm out of town for > the next few days but, if you're not in a rush, I can do that over the > weekend. LMK > >> Slau > >> > >> > >>> On Apr 14, 2026, at 10:25 AM, Martin (Punky) Sopart < > [email protected]> wrote: > >>> > >>> Hello team! > >>> > >>> I have to edit some podcasts. > >>> What is the best and most accessible way for isolating the spoken > content to > >>> get rid of background noises. > >>> > >>> Thank you and best wishes! / Martin > >>> > >>> > >>> -- > >>> You received this message because you are subscribed to the Google > Groups "Pro Tools Accessibility" group. > >>> To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > >>> To view this discussion visit > https://groups.google.com/d/msgid/ptaccess/008101dccc1a%2491e4a8d0%24b5adfa70%24%40cakewalker.de. > > > > > > -- > > You received this message because you are subscribed to the Google > Groups "Pro Tools Accessibility" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > > To view this discussion visit > https://groups.google.com/d/msgid/ptaccess/324d6bd2-cfce-4f85-afd6-99ed4bd7e098%40gmail.com. > > > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion visit > https://groups.google.com/d/msgid/ptaccess/7FFC41A0-F5B3-46DD-809F-B1CFC4E0107A%40gmail.com. > > > > > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <mailto: > [email protected]> . > To view this discussion visit > https://groups.google.com/d/msgid/ptaccess/0ad29c01-2bcd-4987-b24d-4726919994den%40googlegroups.com > > < > https://groups.google.com/d/msgid/ptaccess/0ad29c01-2bcd-4987-b24d-4726919994den%40googlegroups.com?utm_medium=email&utm_source=footer> > > . > > > > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/ptaccess/5ec7dba6-2291-4a11-8970-fd7a8cfb6cd1n%40googlegroups.com.
