There is no, completely foolproof way to do it. However this works pretty well. Hit menu then cursor over to recording settings. Use customize and for the parameter to insert a section break mark set it to when it hears 4 seconds of silence. This will work for professionally produced tape recordings. If you made them yourself then you will have to adjust accordingly.
Frank -----Original Message----- From: Linda Reeder [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 20, 2005 9:12 PM To: [email protected] Subject: Re: recording from tape to cd nO YOyou have to change the track after every song. If you just let the let the CD run without changing the track it will all be on one track Linda Reeder ----- Original Message ----- From: "Scott Blanks" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, April 20, 2005 6:17 PM Subject: recording from tape to cd > Hi all, > > I'm about to use the PTR1 to record from tape onto cd. My question of the > moment is ... Must I stop recording after each track in order to separate > the cd into logical tracks? Or is there a way to set the recording settings > so that the tape can play nonstop from beginning to end and the ptr1 will > automatically recognize separation between tracks? > > If this made enough sense, can you help? If it was gibberish, tell me how I > can clarify. > > Thanks, > Scott > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
