Just try restart the mcollective service on the agent and check if you see any error there.
You should also check if there are anything in-between your agent and master that's blocking traffic. Mcollective traffic goes from agent to the master, not the other way around. --KL On 2/21/12 10:46 AM, "Mark B" <mlitt...@indiana.edu> wrote: >The pe-activemq is running on the server and the pe-mcollective is >running on the agent. The reports from the client are showing up on >the puppet console. Just not seeing the node on live management >screen. Is there a way to manually do a new puppet run to try and >force it? > >On Feb 21, 10:17 am, Kenneth Lo <k...@paydiant.com> wrote: >> In PE, pe-activemq is the server service (master need that service) and >> pe-mcollective is the client service (agents). >> >> If you don't see your agents listed in LM normally means that the >> pe-mcollective service is not running on the clients. >> >> What I've experienced with PE is that under normal turn-key config, >>after >> your agent initially connected to the master, by default it need to wait >> for another puppet run for the mcollective class (in default) to pickup >> the service. >> >> --KL >> >> On 2/21/12 8:08 AM, "Mark B" <mlitt...@indiana.edu> wrote: >> >> >> >> >> >> >> >> >> >> >Yes...I was able to do the mco ping and the only node that responded >> >was the puppet master ..not the client. Both activemq and mcollective >> >appear to be working. >> >> >is there a pe-users group? I thought that is what this was ? >> >> >On Feb 20, 2:58 pm, Justin Stoller <jus...@puppetlabs.com> wrote: >> >> Have you tried su-ing to thepeadminuser on the master node and trying >> >> `mco ping`? >> >> >> Live Management is basically a front end for actions thepeadminuser >> >>can >> >> do. Dropping down to that level may let you debug the issue easier. >> >> >> Other things to check are that activemq is working and correctly >> >>configured >> >> on the master, as well as mcollective on all of your agent nodes. >> >> >> You may also find more users that understand your question on the >> >>pe-users >> >> list (I assume if you're using Live Management you're using PE) >> >> >> - Justin >> >> >> On Mon, Feb 20, 2012 at 11:35 AM, Littman, Mark B >> >><mlitt...@indiana.edu>wrote: >> >> >> > Yes it is in the default group. I am wondering if it is a >>permissions >> >> > issue for the puppet user account? Does that need anything special >> >>for live >> >> > management ? >> >> >> > Reminder: it shows on all other tabs on the puppet console...just >>not >> >>live >> >> > management. >> >> >> > -----Original Message----- >> >> > From: puppet-users@googlegroups.com >> >>[mailto:puppet-users@googlegroups.com] >> >> > On Behalf Of Michael Stahnke >> >> > Sent: Monday, February 20, 2012 2:31 PM >> >> > To: puppet-users@googlegroups.com >> >> > Subject: Re: [Puppet Users] Cannot see node on Live Management >> >> >> > On Mon, Feb 20, 2012 at 4:29 AM, Mark B <mlitt...@indiana.edu> >>wrote: >> >> > > The node and reports show up on the dashboard but not on the live >> >> > > management tab. >> >> >> > > Does anyone have any suggestions? is this a permissions issue? >> >> >> > Is the node in the default group in the dashboard? Puppet runs >>setup >> >>the >> >> > mcollective/live management bits. The class is called >>pe_mcollective. >> >> >> > > -- >> >> > > You received this message because you are subscribed to the >>Google >> >> > Groups "Puppet Users" group. >> >> > > To post to this group, send email to >>puppet-users@googlegroups.com. >> >> > > To unsubscribe from this group, send email to >> >> > puppet-users+unsubscr...@googlegroups.com. >> >> > > For more options, visit this group at >> >> >http://groups.google.com/group/puppet-users?hl=en. >> >> >> > -- >> >> > You received this message because you are subscribed to the Google >> >>Groups >> >> > "Puppet Users" group. >> >> > To post to this group, send email to puppet-users@googlegroups.com. >> >> > To unsubscribe from this group, send email to >> >> > puppet-users+unsubscr...@googlegroups.com. >> >> > For more options, visit this group at >> >> >http://groups.google.com/group/puppet-users?hl=en. >> >> >> > -- >> >> > You received this message because you are subscribed to the Google >> >>Groups >> >> > "Puppet Users" group. >> >> > To post to this group, send email to puppet-users@googlegroups.com. >> >> > To unsubscribe from this group, send email to >> >> > puppet-users+unsubscr...@googlegroups.com. >> >> > For more options, visit this group at >> >> >http://groups.google.com/group/puppet-users?hl=en. >> >> >-- >> >You received this message because you are subscribed to the Google >>Groups >> >"Puppet Users" group. >> >To post to this group, send email to puppet-users@googlegroups.com. >> >To unsubscribe from this group, send email to >> >puppet-users+unsubscr...@googlegroups.com. >> >For more options, visit this group at >> >http://groups.google.com/group/puppet-users?hl=en. >> >> This message is for the designated recipient only and may contain >>privileged, proprietary, or otherwise private information. If you have >>received it in error, please notify the sender immediately and delete >>the original. Any other use of the email by you is prohibited. > >-- >You received this message because you are subscribed to the Google Groups >"Puppet Users" group. >To post to this group, send email to puppet-users@googlegroups.com. >To unsubscribe from this group, send email to >puppet-users+unsubscr...@googlegroups.com. >For more options, visit this group at >http://groups.google.com/group/puppet-users?hl=en. > This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
