>>vmbr0 is connected to a physical interface, so that is IMHO impossible.
Oh you are right
for nat, we can add another bridge.
example : proxmox vmbr0 = public ip adres
vmbr1 = private addres: 192.168.0.1
guests = private address : 192.168.0.2
same for routing, we need a second ip address
>>Please can you clearly define what routed mode is (still not understand)?
For me,(like libvirt) routed mode is proxmox host is a router, routing between
is external ip and bridge ip for example:
external hardware router(10.0.0.1)-------------->(10.0.0.2 eth0-vmbr0) proxmox
host (192.168.0.1 - vmbr1)--------------->(192.168.0.2)GUESTVM
external router have a route : 192.168.0.0/24 gw 10.0.0.2
proxmox host default gateway : 10.0.0.1
guest vm default gw : 192.168.0.1
This is why I think that live migrate can't work, because outside router always
have the same route to proxmox host.
(or you need to use a routing procotol like rip/ospf to reconfigure the outside
router)
But I think that main usage is for some hosting provider like Heizer,ovh,....
so you don't have access to the hardware router.
----- Mail original -----
De: "Dietmar Maurer" <[email protected]>
À: "Alexandre DERUMIER" <[email protected]>
Cc: "pve.proxmox.com" <[email protected]>
Envoyé: Dimanche 25 Août 2013 07:47:41
Objet: RE: [pve-devel] internal dhcp server, where to put dhcp configuration ?
> It's also possible that user use vmbr0 (with eth0 plugged) in nat mode or
> routed mode.
> (maybe this need some dhcp iptables filtering too)
vmbr0 is connected to a physical interface, so that is IMHO impossible.
Please can you clearly define what routed mode is (still not understand)?
_______________________________________________
pve-devel mailing list
[email protected]
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
