>>Confused. Please can you try to use my original example, and modify that >>where needed?
NAT configuration ------------------ found an old doc from ovh here : http://guides.ovh.com/Proxmox iface vmbr0 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1 bridge_ports eth1 bridge_stp off bridge_fd 0 iface vmbr2 inet static address 10.0.0.1 netmask 255.255.255.0 post-up iptables -t nat -A POSTROUTING -s '10.0.0.0/24' -o vmbr0 -j MASQUERADE post-down iptables -t nat -D POSTROUTING -s '10.0.0.0/24' -o vmbr0 -j MASQUERADE bridge_stp off bridge_fd 0 guest ip: ip : 10.0.0.2 netmask 255.255.255.0 gateway : 10.0.0.1 (vmbr2 ip) so guest ip 10.0.0.2 should be natted to vmbr0 192.168.1.2 ip ----- Mail original ----- De: "Dietmar Maurer" <[email protected]> À: "Alexandre DERUMIER" <[email protected]> Cc: "pve.proxmox.com" <[email protected]> Envoyé: Dimanche 25 Août 2013 08:33:16 Objet: RE: [pve-devel] internal dhcp server, where to put dhcp configuration ? > >>vmbr0 is connected to a physical interface, so that is IMHO impossible. > > Oh you are right > > for nat, we can add another bridge. > > example : proxmox vmbr0 = public ip adres > vmbr1 = private addres: 192.168.0.1 > guests = private address : 192.168.0.2 > > > same for routing, we need a second ip address Confused. Please can you try to use my original example, and modify that where needed? _______________________________________________ pve-devel mailing list [email protected] http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
