>>host config: >>auto eth0 >>iface eth0 inet statis >>address 192.168.1.2 >>netmask 255.255.255.0 >>gateway 192.168.1.1
>>guest config: >>iface eth0 inet statis >>address 192.168.1.3 >>netmask 255.255.255.0 >>gateway 192.168.1.1 Don't understand, guest and host have same gateway ? (where is defined 192.168.1.1 ?) >>Because requiring an additional bridge generates a lot of unresolved problems >>(migration?). >>Isn't above setup simpler? - Normally, the user does not need to setup >>anything. I think it resolve migration, if your client is on the same external network than proxmox host. If client is behind a front router, I doesn't work because router direct forward to proxmox host with hardcoded route. >>And AFAIK it works perfectly for hosters like hetzner/OVH which apply mac >>restrictions. Ok, great, I was not sure about this. ----- Mail original ----- De: "Dietmar Maurer" <[email protected]> À: "Alexandre DERUMIER" <[email protected]> Cc: [email protected] Envoyé: Mardi 27 Août 2013 08:00:47 Objet: RE: [PATCH] add routed network mode > >>So the /etc/network/interfaces on the proxmox node can be: > >> > >>auto eth0 > >>iface eth0 inet statis > >>address 192.168.1.2 > >>netmask 255.255.255.0 > >>gateway 192.168.1.1 > >> > >>Note: above is just an example > > > oh, you have also an ip on proxmox host in the vm network ? (can you post > your host config and guest config example ?). host config: auto eth0 iface eth0 inet statis address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1 guest config: iface eth0 inet statis address 192.168.1.3 netmask 255.255.255.0 gateway 192.168.1.1 > If yes, why not simple use a bridge and put tap interface on it. no arp proxy > should be need, and we should have true routing.(like with libvirt) Because requiring an additional bridge generates a lot of unresolved problems (migration?). Isn't above setup simpler? - Normally, the user does not need to setup anything. And AFAIK it works perfectly for hosters like hetzner/OVH which apply mac restrictions. _______________________________________________ pve-devel mailing list [email protected] http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
