>>The VMs are in the same network as the host in above use case, so we use the >>same setup. >>The provider will tell you what gateway you n
Oh, ok, I understand. So proxmox is not routing packets. For me, this is not "routed" mode. what you do is something like bridging, but spoof guest mac address with host mac address. If a routed setup, the provider give you a subnet range, routed to the proxmox main ip. and guests use proxmox ips as gateway. So maybe are we talking about 2 differents this ? (I need to check the forum, I had helped one use some time ago with routed network on hetzner, with differents sub-ranges) ----- Mail original ----- De: "Dietmar Maurer" <[email protected]> À: "Alexandre DERUMIER" <[email protected]> Cc: [email protected] Envoyé: Mardi 27 Août 2013 08:23:07 Objet: RE: [PATCH] add routed network mode > >>host config: > >>auto eth0 > >>iface eth0 inet statis > >>address 192.168.1.2 > >>netmask 255.255.255.0 > >>gateway 192.168.1.1 > > >>guest config: > >>iface eth0 inet statis > >>address 192.168.1.3 > >>netmask 255.255.255.0 > >>gateway 192.168.1.1 > > > Don't understand, guest and host have same gateway ? (where is defined > 192.168.1.1 ?) The VMs are in the same network as the host in above use case, so we use the same setup. The provider will tell you what gateway you need. > > > >>Because requiring an additional bridge generates a lot of unresolved > problems (migration?). > >>Isn't above setup simpler? - Normally, the user does not need to setup > anything. > > > I think it resolve migration, if your client is on the same external network > than proxmox host. > If client is behind a front router, I doesn't work because router direct > forward > to proxmox host with hardcoded route. But this is nothing we can solve anyways. > >>And AFAIK it works perfectly for hosters like hetzner/OVH which apply > mac restrictions. > > Ok, great, I was not sure about this. _______________________________________________ pve-devel mailing list [email protected] http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
