--- Begin Message ---Hi Stefan! Thank you kindly! I will give it a try. Steve On Tuesday, February 16, 2021, 01:54:55 PM EST, Stefan M. Radman <[email protected]> wrote: Hi Steve Attached and below is an /etc/network/interfaces that should do what you want. Just* keep interface enp9s0f1 connected to your private subnet 192.168.20.2/23* connect interface enp9s0f0 to your internet subnet* connect internet VMs to vmbr1* connect interface enp11s0f1 to your private subnet 192.168.30.2/23* connect VMs on subnet 192.168.30.2/23 to vmbr2 If you keep the comment lines (#) they'll show up in the web interface as well. Disclaimer: I did not test it but it should give you the right idea to go ahead. StefanPS: please disregard previous attachment - this is the correct one /etc/network/interfaces: auto loiface lo inet loopback iface enp9s0f1 inet manual# Uplink for vmbr0 auto vmbr0iface vmbr0 inet static address 192.168.20.2/23 gateway 192.168.20.1 bridge_ports enp9s0f1 bridge_stp off bridge_fd 0# Host Management iface enp11s0f0 inet manual# Uplink for vmbr1 auto vmbr1iface vmbr1 inet manual bridge_ports enp9s0f0 bridge_stp off bridge_fd 0# Bridge for VMs on the Internet iface enp11s0f1 inet manual# Uplink for vmbr2 auto vmbr2iface vmbr2 inet manual bridge_ports enp11s0f1 bridge_stp off bridge_fd 0# Bridge for VMs on network 192.168.30.0/24 iface enp9s0f0 inet manual iface enp3s0 inet manual iface enp2s0 inet manualOn Feb 14, 2021, at 18:29, Steve Frazier via pve-user <[email protected]> wrote: From: Steve Frazier <[email protected]> Subject: Re: [PVE-User] Adding an Internet NIC to existing Proxmox Date: February 14, 2021 at 18:29:14 GMT+1 To: "[email protected]" <[email protected]> Here is my "interfaces" file: auto loiface lo inet loopback iface enp9s0f1 inet manual auto vmbr0iface vmbr0 inet static address 192.168.20.2/23 gateway 192.168.20.1 bridge_ports enp9s0f1 bridge_stp off bridge_fd 0 iface enp11s0f0 inet manual iface enp11s0f1 inet manual iface enp9s0f0 inet manual iface enp3s0 inet manual iface enp2s0 inet manual On Sunday, February 14, 2021, 12:14:28 PM EST, Steve Frazier via pve-user <[email protected]> wrote: I need some help. I am new to Proxmox. I have it set up now using (1) one NIC to an internal network of 192.168.20.0/23 and I would like to use another NIC I have available for the internet which has (5) available IPs. I have attached a view of my existing network. I would like to set up an additional (NIC) when would allow me to assign to a virtual server that has two virtual NICs with one being the internet and the other being my internal network. While I am at it, I have another networking 192.168.30.0/24 that I would like to assign to an available NIC so that I could assign virtual servers to that NICat a later time. Could someone please help me on how to do this Thanks very much. _______________________________________________ pve-user mailing list [email protected] https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user _______________________________________________ pve-user mailing list [email protected] https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.proxmox.com%2Fcgi-bin%2Fmailman%2Flistinfo%2Fpve-user&data=04%7C01%7Csmr%40kmi.com%7Cfb3db335b1844cd9162208d8d10e1613%7Cc2283768b8d34e008f3d85b1b4f03b33%7C0%7C0%7C637489205732810378%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=bbtAAx1zpomz3hCKtKmrW3UIFF6iyprwmGcer1Q0njQ%3D&reserved=0 CONFIDENTIALITY NOTICE:This communication may contain privileged and confidential information, or may otherwise be protected from disclosure, and is intended solely for use of the intended recipient(s). If you are not the intended recipient of this communication, please notify the sender that you have received this communication in error and delete and destroy all copies in your possession.
--- End Message ---
_______________________________________________ pve-user mailing list [email protected] https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
