Good morning,
I'm currently replacing one PVE cluster with another. The new hardware has a
bunch of different
network interfaces that I want to use to separate VM traffic from
Corosync/Ceph/migration traffic.
Is there a way to configure the interface/network that is used for migration or
does this depend on
the combination of hostname resolution and which hostname was used to create
the cluster?
(I have various hostnames configured per host, for each configured network one,
so that I can
explicitly choose which interface I use to connect to a host.)
Regards,
Uwe
Interface configuration:
eno1np0 --+-- untagged VLAN X -- Corosync ring 1/management network
(192.168.1.0/24)
eno2np1 N/C
enp3s0 --+
+-- bond0 --+-- bond0.100 -- vmbr100 \
enp4s0 --+ +-- bond0.101 -- vmbr101 +-- VM traffic
+-- bond0.102 -- vmbr102 /
enp5s0 --+
+-- bond1 --+-- untagged VLAN Y -- Corosync ring 0/Ceph
(172.16.1.0/24)
enp6s0 --+
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
