Hi, datacenter->options->migration settings->network
Le jeudi 15 décembre 2022 à 08:23 +0100, Uwe Sauter a écrit : > Good morning, > > I'm currently replacing one PVE cluster with another. The new > hardware has a bunch of different > network interfaces that I want to use to separate VM traffic from > Corosync/Ceph/migration traffic. > > Is there a way to configure the interface/network that is used for > migration or does this depend on > the combination of hostname resolution and which hostname was used to > create the cluster? > (I have various hostnames configured per host, for each configured > network one, so that I can > explicitly choose which interface I use to connect to a host.) > > Regards, > > Uwe > > > Interface configuration: > > eno1np0 --+-- untagged VLAN X -- Corosync ring 1/management network > (192.168.1.0/24) > > eno2np1 N/C > > enp3s0 --+ > +-- bond0 --+-- bond0.100 -- vmbr100 \ > enp4s0 --+ +-- bond0.101 -- vmbr101 +-- VM traffic > +-- bond0.102 -- vmbr102 / > > enp5s0 --+ > +-- bond1 --+-- untagged VLAN Y -- Corosync ring 0/Ceph > (172.16.1.0/24) > enp6s0 --+ > > _______________________________________________ > pve-user mailing list > [email protected] > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > _______________________________________________ pve-user mailing list [email protected] https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
