--- Begin Message ---
Hi Timo
See
https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#_default_configuration_using_a_bridge
<https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#_default_configuration_using_a_bridge>
3.3.4. Default Configuration using a Bridge
<https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#_default_configuration_using_a_bridge>
The installation program creates a single bridge named vmbr0, which is
connected to the first Ethernet card.
The Proxmox VE installer does not support vlan tagging during the installation.
At time of installation all traffic is untagged.
Once you have access to the management GUI (through the management IP address
provided during installation) you can complete the network configuration and
configure VLAN tagging.
https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#sysadmin_network_vlan
<https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#sysadmin_network_vlan>
Select node > Network > Create > Linux VLAN
Stefan
> On Jul 15, 2023, at 22:25, Timo Veith <[email protected]> wrote:
>
> Dear pve users,
>
> I am totally new to pve. Is there a recommended way to setup vlans during the
> installation of a host? I have found some notes about vlans in the
> documentation but it only describes some sections in /etc/network/interfaces
> but it doesn’t say when this should be done. In fact I did one of the
> proposed methods and I can connect to the management ip address in that vlan
> but I wonder if it was right how I did it. I installed from the iso,
> configured some ip because I didn’t find any option for using vlans in the
> installer and then searched through the documentation. I changed the
> /etc/network/interfaces and did a reboot. Where after I was able to connect
> to the ip address that I configured. However in the console I can still read
> „use blabla ip and port 8006“ which is the ip I used during the installation.
>
> Cheers
> Timo_______________________________________________
> pve-user mailing list
> [email protected]
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
--- End Message ---
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
