Hi everyone, great replies! Thanks to anybody who answered! With that in my „pocket“ I will surely get further with my test installation.
I already learned something new, because I never heard of a „vlan aware bridge“. Cheers and have nice day Timo > Am 16.07.2023 um 16:59 schrieb Stefan Radman via pve-user > <[email protected]>: > > > Von: Stefan Radman <[email protected]> > Betreff: Aw: [PVE-User] vlan setup at time of host installation > Datum: 16. Juli 2023 um 16:59:25 MESZ > An: Proxmox VE user list <[email protected]> > > > Hi Timo > > See > https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#_default_configuration_using_a_bridge > > <https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#_default_configuration_using_a_bridge> > 3.3.4. Default Configuration using a Bridge > <https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#_default_configuration_using_a_bridge> > The installation program creates a single bridge named vmbr0, which is > connected to the first Ethernet card. > > The Proxmox VE installer does not support vlan tagging during the > installation. > At time of installation all traffic is untagged. > > Once you have access to the management GUI (through the management IP address > provided during installation) you can complete the network configuration and > configure VLAN tagging. > https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#sysadmin_network_vlan > <https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#sysadmin_network_vlan> > Select node > Network > Create > Linux VLAN > > Stefan > >> On Jul 15, 2023, at 22:25, Timo Veith <[email protected]> wrote: >> >> Dear pve users, >> >> I am totally new to pve. Is there a recommended way to setup vlans during >> the installation of a host? I have found some notes about vlans in the >> documentation but it only describes some sections in /etc/network/interfaces >> but it doesn’t say when this should be done. In fact I did one of the >> proposed methods and I can connect to the management ip address in that vlan >> but I wonder if it was right how I did it. I installed from the iso, >> configured some ip because I didn’t find any option for using vlans in the >> installer and then searched through the documentation. I changed the >> /etc/network/interfaces and did a reboot. Where after I was able to connect >> to the ip address that I configured. However in the console I can still read >> „use blabla ip and port 8006“ which is the ip I used during the >> installation. >> >> Cheers >> Timo_______________________________________________ >> pve-user mailing list >> [email protected] >> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > _______________________________________________ > pve-user mailing list > [email protected] > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
_______________________________________________ pve-user mailing list [email protected] https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
