--- Begin Message ---
Hi Joseph
Further information and advice on mdraid with Proxmox can be found here
Software RAID - Unsupported Technologies - mdraid
https://pve.proxmox.com/wiki/Software_RAID#mdraid
For non-production/unsupported setups, where you still want to use mdraid
(please don't!), you can create the required RAID level during Debian
installation and then install Proxmox VE.
Note the “please don’t”.
Regards
Stefan
> On Jul 26, 2023, at 15:07, Aaron Lauterer <[email protected]> wrote:
>
> Please have a look at the same topic being discussed last month
> https://lists.proxmox.com/pipermail/pve-user/2023-June/017117.html
>
> TL;DR: VROC is usually a "fake raid" and not a real HW RAID. It only tells
> the OS what software RAID to create. On Linux that would typically be MD-RAID.
>
> Proxmox VE does not ship MD Raid and therefore, those disks will still be
> visible as single disks.
>
> Cheers,
> Aaron
>
> On 7/26/23 13:44, Joseph John wrote:
>> Dear All,
>> We are trying to install ProxMox 8 on Supermicro x12dpu-6 , with Intel VROC
>> RAID Controller , we have configured two SSD in RAID 1 , from the BIOS in
>> hardware level and raid volume is created, but when coming to the proxmox
>> setup , the installation step is not showing the RAID volume, but it shows
>> the physical disk separately .
>> Like get guidance on how Proxmox treats Intel VROC RAID Controller and the
>> possible next step
>> Thanks
>> Thanks
>> Joseph John
>> _______________________________________________
>> pve-user mailing list
>> [email protected]
>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
> _______________________________________________
> pve-user mailing list
> [email protected]
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
--- End Message ---
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
