Hello. I have machine which have span port from physical switch for VMs. Interface config: ---- auto eth3 allow-hotplug eth3 iface eth3 inet manual up /sbin/ifconfig $IFACE up downp /sbin/ifconfig $IFACE down
post-up ethtool -K eth4 sg off post-up ethtool -K eth4 tso off post-up ethtool -K eth4 gso off post-up ethtool -K eth4 gro off post-up ethtool -K eth4 lro off post-up ethtool -K eth4 tco off auto vmbrspan iface vmbrspan inet manual bridge_ports eth3 bridge_stp off bridge_fd 0 post-up /usr/sbin/brctl setageing $IFACE 0 ---- pveversion: ---- lex@galleon > pveversion -v pve-manager: 3.0-23 (pve-manager/3.0/957f0862) running kernel: 2.6.32-20-pve proxmox-ve-2.6.32: 3.0-100 pve-kernel-2.6.32-20-pve: 2.6.32-100 pve-kernel-2.6.32-19-pve: 2.6.32-96 pve-kernel-2.6.32-18-pve: 2.6.32-88 lvm2: 2.02.95-pve3 clvm: 2.02.95-pve3 corosync-pve: 1.4.5-1 openais-pve: 1.1.4-3 libqb0: 0.11.1-2 redhat-cluster-pve: 3.2.0-2 resource-agents-pve: 3.9.2-4 fence-agents-pve: 4.0.0-1 pve-cluster: 3.0-4 qemu-server: 3.0-20 pve-firmware: 1.0-22 libpve-common-perl: 3.0-4 libpve-access-control: 3.0-4 libpve-storage-perl: 3.0-8 vncterm: 1.1-4 vzctl: 4.0-1pve3 vzprocps: 2.0.11-2 vzquota: 3.1-2 pve-qemu-kvm: 1.4-13 ksm-control-daemon: 1.1-1 ---- It worked in proxmox 2.3.x, but after upgrade to 3.0-23 i can't see span traffic from inside VMs. I can see mirrored data on host node, both on eth3 and on vmbrspan, but not on tapXXXiY interface. Any ideas? _______________________________________________ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user