Well silly me. brctl location changed from /usr/sbin in squeeze to just /sbin in wheezy. Sorry for bothering, it's working now :)
On Mon, Jul 8, 2013, at 06:32 AM, Lex Rivera wrote: > Hello. > I have machine which have span port from physical switch for VMs. > > Interface config: > ---- > auto eth3 > allow-hotplug eth3 > iface eth3 inet manual > up /sbin/ifconfig $IFACE up > downp /sbin/ifconfig $IFACE down > > post-up ethtool -K eth4 sg off > post-up ethtool -K eth4 tso off > post-up ethtool -K eth4 gso off > post-up ethtool -K eth4 gro off > post-up ethtool -K eth4 lro off > post-up ethtool -K eth4 tco off > > auto vmbrspan > iface vmbrspan inet manual > bridge_ports eth3 > bridge_stp off > bridge_fd 0 > post-up /usr/sbin/brctl setageing $IFACE 0 > ---- > pveversion: > ---- > lex@galleon > pveversion -v > pve-manager: 3.0-23 (pve-manager/3.0/957f0862) > running kernel: 2.6.32-20-pve > proxmox-ve-2.6.32: 3.0-100 > pve-kernel-2.6.32-20-pve: 2.6.32-100 > pve-kernel-2.6.32-19-pve: 2.6.32-96 > pve-kernel-2.6.32-18-pve: 2.6.32-88 > lvm2: 2.02.95-pve3 > clvm: 2.02.95-pve3 > corosync-pve: 1.4.5-1 > openais-pve: 1.1.4-3 > libqb0: 0.11.1-2 > redhat-cluster-pve: 3.2.0-2 > resource-agents-pve: 3.9.2-4 > fence-agents-pve: 4.0.0-1 > pve-cluster: 3.0-4 > qemu-server: 3.0-20 > pve-firmware: 1.0-22 > libpve-common-perl: 3.0-4 > libpve-access-control: 3.0-4 > libpve-storage-perl: 3.0-8 > vncterm: 1.1-4 > vzctl: 4.0-1pve3 > vzprocps: 2.0.11-2 > vzquota: 3.1-2 > pve-qemu-kvm: 1.4-13 > ksm-control-daemon: 1.1-1 > ---- > It worked in proxmox 2.3.x, but after upgrade to 3.0-23 i can't see span > traffic from inside VMs. > I can see mirrored data on host node, both on eth3 and on vmbrspan, but > not on tapXXXiY interface. > Any ideas? _______________________________________________ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user