* Frank Thommen <f.thom...@dkfz-heidelberg.de> [191217 20:29]: > (how) can I connect two virtual bridges to the same network (using the same > gateway)? > > Our currently-being-built-up PVE server has four Linux network bonds > connecting to two three networks. One is being used for the PVE server > itself (administration, web ui ecc), the other three for virtual machines > which will reside in three different networks. One of these three networks > is the same as the one where the PVE server is residing, but I'd still like > to use separate NICs for the VMs. > > The server itself is attached to the default vmbr0 (using bond0). But as > soon as I want to configure a second bridge vmbr1 (using bond1) to the same > network, PROXMOX complains that the default gateway already exists. > > Is it technically possible/supported to have multiple bridges to the same > network (with the same gateways)?
Do you actually need IP traffic on the host on the second interface? If not, then don't configure IP addresses, gateways, etc... Chris -- Chris Hofstaedtler / Deduktiva GmbH (FN 418592 b, HG Wien) www.deduktiva.com / +43 1 353 1707 _______________________________________________ pve-user mailing list pve-user@pve.proxmox.com https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
