Lam-MPI is quite old at this point and doesn't appear to include support
for PVFS2. I think you will need to use MPICH or OpenMPI.
-Phil
On 09/12/2013 03:01 PM, Julio Henrique wrote:
I'm trying to install Lam-mpi-7.1.4 with pvfs-2.8.2 on Debian Wheezy
64 bits kernel 3.10.7, but the
following error occurs:
compiling ROMIO in directory adio/ad_pvfs2
/ bin / sh: 31: cd: can not cd to adio/ad_pvfs2
Make failed in diectory adio/ad_pvfs2
make [3]: ** [mpiolib] Error 1
make [3]: Leaving directory '/ usr/local/lam-7.1.4/romio'
make [2]: ** [mpio] Error 2
make [2]: Leaving directory '/ usr/local/lam-7.1.4/romio'
make [1]: ** [romio-all] Error 2
make [1]: Leaving directory '/ usr/local/lam-7.1.4'
make: ** [all-recursive] Error 1
Compile options Lam-mpi:
./configure --prefix=/usr/local/lam
--with-romio-flags=-file_system=pvfs2+nfs --with-romio-libs="-
L/usr/local -lpvfs2" --enable-shared --with-modules --with-rsh="ssh-x"
--with-threads=posix --with-
fc=f95 --with-wrapper-extra-ldflags
PVFS compile options:
./configure --enable-fast --with-mip=/usr/local/lam
--disable-segv-backtrace
There are 6 nodes and a server. This worked on the server and in 4
nodes, but in 2 nodes insists on
giving the above error.
One of the machines is Pentium 4 3.0 GHz and the other is Core 2 Quad
2.66 GHz. The strange thing is
that on other machines with these same processors worked.
I tried to compile LAM-MPI first than pvfs2, pvfs2 first, etc. I tried
several ways.
Even in builds that worked, I had to install LAM-MPI first than pvfs2
and then recompile the lam-mpi.
I did several internet searches and found nothing.
Is there an easier way to install LAM-MPI + PVFS2 ?
_______________________________________________
Pvfs2-users mailing list
[email protected]
http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
_______________________________________________
Pvfs2-users mailing list
[email protected]
http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
