I also posted this to the myth users list but was suggested to post here. I've installed a WinTV-PVR-USB2 on a FC 6 ATRPMs Myth System, everything updated. The cd from the box could not be read, so firmware is from pvrusb2_inf_24117.zip downloaded from the Hauppauge web site. The problem is that the video is jumpy, maybe a couple of times a second, repetitively. If you look on an input (S Video) with a news crawl along the bottom, you can see it jump. The audio also seems to not be synced with the video sometimes. I've tried a few settings in the /sys/class/pvrusb2 tree, but could find nothing that affects it so far. I'm using an S video input from a directv reciever, at 720x480. Any help or suggestions would be appreciated. DMESG is as follows:
sb 2-6: new high speed USB device using ehci_hcd and address 4 usb 2-6: configuration #1 chosen from 1 choice usb 2-6: reset high speed USB device using ehci_hcd and address 4 **WARNING** I2C adapter driver [pvrusb2_a] forgot to specify physical device; fix it! ir-kbd-i2c: probe 0x1a @ pvrusb2_a: no ir-kbd-i2c: probe 0x18 @ pvrusb2_a: yes input: i2c IR (Hauppauge) as /class/input/input7 ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-7/7-0018/ir0 [pvrusb2_a] tuner 7-0043: chip found @ 0x86 (pvrusb2_a) tda9887 7-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 7-0061: chip found @ 0xc2 (pvrusb2_a) cx25840 7-0044: cx25843-23 found @ 0x88 (pvrusb2_a) cx25840 7-0044: loaded v4l-cx25840.fw firmware (12559 bytes) wm8775 7-001b: chip found @ 0x36 (pvrusb2_a) tveeprom 7-00a2: Hauppauge model 24012, rev E1A3, serial# 8687279 tveeprom 7-00a2: tuner model is TCL MFNM05-4 (idx 103, type 43) tveeprom 7-00a2: TV standards NTSC(M) (eeprom 0x08) tveeprom 7-00a2: audio processor is CX25843 (idx 37) tveeprom 7-00a2: decoder processor is CX25843 (idx 30) tveeprom 7-00a2: has radio, has IR receiver, has no IR transmitter tuner 7-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) tda9887 7-0043: Data bytes: b=0x14 c=0x30 e=0x44 tuner 7-0061: Tuner mode: analog TV tuner 7-0061: Frequency: 175.25 MHz tuner 7-0061: Standard: 0x00000100 cx25840 7-0044: Video signal: not present cx25840 7-0044: Detected format: NTSC-M cx25840 7-0044: Specified standard: PAL-M cx25840 7-0044: Specified video input: Composite 7 cx25840 7-0044: Specified audioclock freq: 48000 Hz cx25840 7-0044: Detected audio mode: mono cx25840 7-0044: Detected audio standard: no detected audio standard cx25840 7-0044: Audio muted: yes cx25840 7-0044: Audio microcontroller: running cx25840 7-0044: Configured audio standard: automatic detection cx25840 7-0044: Configured audio system: BTSC cx25840 7-0044: Specified audio input: Tuner (In8) cx25840 7-0044: Preferred audio mode: stereo wm8775 7-001b: Input: 2 pvrusb2: Device initialization completed successfully. pvrusb2: registered device video2 [mpeg] cx25840 7-0044: 720x576 is not a valid size! thanks Mark _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
