On Mon, 25 Jun 2007, Mike Isely wrote: >Mark:
>There were some driver fixes that addressed video stability back around >December 2006. The standalone drivers since then have of course >included that fix and the in-kernel driver from 2.6.21 onwards has the >fix. That particular fix IIRC was also backported into a point-release >of 2.6.20 but I don't remember off the top of my head at what point it >was introduced. > >Can you please verify which pvrusb2 driver version you are running? >Did you pull down a standalone snapshot or is it whatever came with your >kernel (what kernel version?) or did you install a v4l-dvb snapshot? > > -Mike > > >On Sun, 24 Jun 2007, Mark Goldberg wrote: > >> I also posted this to the myth users list but was suggested to post here. >> >> I've installed a WinTV-PVR-USB2 on a FC 6 ATRPMs Myth System, >> everything updated. The cd from the box could not be read, so firmware >> is from pvrusb2_inf_24117.zip downloaded from the Hauppauge web site. [...] Thanks for the reply. I'm using whatever is in 2.6.20-1.2952.fc6 fedora kernel (AMD64). I don't know how that matches up with the normal kernel releases. I tried an earlier kernel and compiled the kernel module from pvrusb2-mci-20070428, but that does not change any of the other modules. It worked about the same and I decided to try the latest FC6 kernel. Let me know how I can tell what the source version is. I can download the fedora source and look at it, if I know where to look. modinfo gives me the following: filename: /lib/modules/2.6.20-1.2952.fc6/kernel/drivers/media/video/pvrusb2/pvrusb2.ko license: GPL description: Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner author: Mike Isely <[EMAIL PROTECTED]> srcversion: 154E3479B16DDDCC397F722 alias: usb:v2040p2400d*dc*dsc*dp*ic*isc*ip* alias: usb:v2040p2900d*dc*dsc*dp*ic*isc*ip* depends: tveeprom,videodev,i2c-core,v4l2-common,cx2341x,v4l1-compat vermagic: 2.6.20-1.2952.fc6 SMP mod_unload parm: video_nr:Offset for device's minor (array of int) parm: ctlchg:0=optimize ctl change 1=always accept new ctl value (int) parm: init_pause_msec:hardware initialization settling delay (int) parm: initusbreset:Do USB reset device on probe (int) parm: procreload:Attempt init failure recovery with firmware reload (int) parm: tuner:specify installed tuner type (array of int) parm: video_std:specify initial video standard (array of int) parm: tolerance:specify stream error tolerance (array of int) parm: debug:Debug trace mask (int) parm: i2c_scan:scan i2c bus at insmod time (int) Mark _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
