> On Tue, Nov 22, 2011 at 08:04:14AM -0900, Roger wrote: >Playing around here and trying to use xawtv's scantv on the hvr-1950's analog >side (/dev/video). > >For some reason, I get every error display under the Sun trying to use scantv >from latest stable xawtv-3, including xawtv-3 git and xawtv-4 git. > >The main error on the latest stable xawtv-3 is no /dev/vbi device. >(Understandable as there is none.) > > >xawtv-3-git & xawtv-4-git scantv without options results in coredumps for both. > >$ scantv -video /dev/video0 >WARNING: no plugins found [/home/roger/src/xawtv/xawtv-3-install/lib/xawtv4] >using device "cmdline" >can't open video device >1 :-( > ><shrugs> I'm positive I had scantv working with my old pvrusb2 device, right?
Ah, here we go. ;-) $ tail -f /var/log/syslog Nov 22 08:15:37 [kernel] pvrusb2: Clearing driver error statuss Nov 22 08:15:38 [kernel] pvrusb2: firmware2 upload transfer failure I'm missing firmware someplace. :-/ BTW, the DVB (digital) side works without issues. (Would be really cool if I could just do grep "pvrusb2", or at most grep "pvrusb2|cx25840" on syslog. But doing so currently doesn't catch lines in between! Well anyways, only a few more lines anyways...) $ cat dmesg b2: Hardware description: WinTV HVR-1950 Model 751xx usbcore: registered new interface driver pvrusb2 pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner pvrusb2: Debug mask is 31 (0x1f) hub 1-2:1.0: unable to enumerate USB device on port 7 pvrusb2: Binding ir_rx_z8f0811_haup to i2c address 0x71. Registered IR keymap rc-hauppauge input: i2c IR (WinTV HVR-1950 Model 75 as /devices/virtual/rc/rc0/input6 rc0: i2c IR (WinTV HVR-1950 Model 75 as /devices/virtual/rc/rc0 ir-kbd-i2c: i2c IR (WinTV HVR-1950 Model 75 detected at i2c-4/4-0071/ir0 [pvrusb2_a] pvrusb2: Binding ir_tx_z8f0811_haup to i2c address 0x70. cx25840 4-0044: cx25843-24 found @ 0x88 (pvrusb2_a) pvrusb2: Attached sub-driver cx25840 i2c-core: driver [tuner] using legacy suspend method i2c-core: driver [tuner] using legacy resume method tuner 4-0042: Tuner -1 found with type(s) Radio TV. pvrusb2: Attached sub-driver tuner firewire_core: created device fw0: GUID 005042b5000097c6, S400 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 3.0.6-gentoo ohci_hcd usb usb4: SerialNumber: 0000:02:08.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2.7: new full speed USB device number 7 using ehci_hcd usb 1-2.7: New USB device found, idVendor=17f6, idProduct=0802 usb 1-2.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2.7: Product: G+SpaceSaver usb 1-2.7: Manufacturer: Unicomp Inc input: Unicomp Inc G+SpaceSaver as /devices/pci0000:00/0000:00:11.0/0000:02:08.2/usb1/1-2/1-2.7/1-2.7:1.0/input/input7 generic-usb 0003:17F6:0802.0004: input,hidraw3: USB HID v1.11 Keyboard [Unicomp Inc G+SpaceSaver] on usb-0000:02:08.2-2.7/input0 cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) tveeprom 4-00a2: Hauppauge model 75111, rev C3E9, serial# 6202710 tveeprom 4-00a2: MAC address is 00:0d:fe:5e:a5:56 tveeprom 4-00a2: tuner model is Philips 18271_8295 (idx 149, type 54) tveeprom 4-00a2: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) tveeprom 4-00a2: audio processor is CX25843 (idx 37) tveeprom 4-00a2: decoder processor is CX25843 (idx 30) tveeprom 4-00a2: has radio, has IR receiver, has IR transmitter pvrusb2: Supported video standard(s) reported available in hardware: PAL-M/N/Nc;NTSC-M/Mj/Mk;ATSC-8VSB/16VSB pvrusb2: Mapping standards mask=0x300b700 (PAL-M/N/Nc;NTSC-M/Mj/Mk;ATSC-8VSB/16VSB) pvrusb2: Setting up 6 unique standard(s) pvrusb2: Set up standard idx=0 name=PAL-M pvrusb2: Set up standard idx=1 name=PAL-N pvrusb2: Set up standard idx=2 name=PAL-Nc pvrusb2: Set up standard idx=3 name=NTSC-M pvrusb2: Set up standard idx=4 name=NTSC-Mj pvrusb2: Set up standard idx=5 name=NTSC-Mk pvrusb2: Initial video standard (determined by device type): NTSC-M pvrusb2: Device initialization completed successfully. pvrusb2: registered device video0 [mpeg] DVB: registering new adapter (pvrusb2-dvb) EXT4-fs (sda2): re-mounted. Opts: (null) EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) tda829x 4-0042: setting tuner address to 60 tda18271 4-0060: creating new instance TDA18271HD/C1 detected @ 4-0060 tda829x 4-0042: type set to tda8295+18271 Adding 2048988k swap on /dev/sda1. Priority:-1 extents:1 across:2048988k e100 0000:00:14.0: eth0: NIC Link is Up 100 Mbps Full Duplex NET: Registered protocol family 10 pvrusb2: firmware2 upload transfer failure pvrusb2: Clearing driver error statuss cx25840 4-0044: 0x0000 is not a valid video input! DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)... tda829x 4-0042: type set to tda8295 tda18271 4-0060: attaching existing instance eth0: no IPv6 routers present NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) pvrusb2: firmware2 upload transfer failure pvrusb2: Clearing driver error statuss pvrusb2: firmware2 upload transfer failure pvrusb2: Clearing driver error statuss pvrusb2: firmware2 upload transfer failure pvrusb2: Clearing driver error statuss cx25840 4-0044: 0x0000 is not a valid video input! cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) pvrusb2: firmware2 upload transfer failure pvrusb2: Clearing driver error statuss cx25840 4-0044: 0x0000 is not a valid video input! cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) pvrusb2: firmware2 upload transfer failure pvrusb2: Clearing driver error statuss pvrusb2: firmware2 upload transfer failure pvrusb2: Clearing driver error statuss pvrusb2: firmware2 upload transfer failure pvrusb2: Clearing driver error statuss pvrusb2: firmware2 upload transfer failure pvrusb2: Clearing driver error statuss pvrusb2: firmware2 upload transfer failure pvrusb2: Clearing driver error statuss pvrusb2: firmware2 upload transfer failure pvrusb2: Clearing driver error statuss pvrusb2: firmware2 upload transfer failure -- Roger http://rogerx.freeshell.org/ _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
