Regarding the power supply replacements, can you recommend any models (from 
Amazon/eBay preferably)?
I saw that they're 6VDC/1.66A , but I don't know the specific type of barrel 
plug I should be
looking for. I know there are "universal" models out there but they wouldn't 
fit the plugs in the
UPS they'd have to go into, and would require some significant connector 
reorganization which I'd
just as soon avoid if at all possible.
Still, recommendations regardless of form factor are welcome!
Thanks!

On Sat, 2019-03-16 at 16:48 +0000, Gary Buhrmaster wrote:
> On Sat, Mar 16, 2019 at 4:06 PM Diego Rivera <[email protected]> 
> wrote:
>  Every so often one of the devices ceases to function and just "dies".
> It has been a long long time since I touched one ofthose, but I would always 
> look at the root
> causesof the hangs first.....
> The two most common issues with the HVR-1950that I ran into is that it can 
> overheat (and hang)and
> the power supply can be going bad (and thedevice hangs).
> For the first, I found avoiding stacking them (whichI had been doing) was 
> sufficient to avoid
> overheating(although your location may vary and you may needactive airflow), 
> and for the second, I
> replaced thepower adapter.  FWIW, I don't think any of thepower adapters that 
> I ever got from
> Hauppaugewere of good quality, and I usually just replaced thempro-actively 
> with a high quality
> switching supply(at the time I had a local source of delta brandedoem 
> switching supplies that were
> dirt cheap andnew in box).  Note that you typically can't just usea VOM on 
> the adapter to test,
> you have to put theadapter under load and look at the ripple.  Usuallyjust 
> easier to replace the
> power supply.
> And none of this was actually in response tothe question you
> asked..._______________________________________________pvrusb2 mailing 
> [email protected]
> http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
-- 



Diego Rivera

Attachment: signature.asc
Description: This is a digitally signed message part

_______________________________________________
pvrusb2 mailing list
[email protected]
http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2

Reply via email to