I just tested CoWeb (http://coweb.cc.gatech.edu), which is a Mac 7600
with a G3 board in it running OS9, Comanche 4.6, VM 2.8 (I believe --
Je77 confirm?), and notification is working fine there.
I also just tested the below code (Bijan's example, with SMTP spelled
correctly, and my settings filled in) on a G4, OS9.1, Image 3.1a, VM
3.0alpha6MT, and in Image 2.7, VM 2.7, and it worked in both.
It's not a Mac issue, and it's not a 3.0/3.1 problem.
Mark
SMTPSocket
deliverMailFrom: '[EMAIL PROTECTED]'
to: #(#'[EMAIL PROTECTED]' )
text: 'From: test
To: "not listed"
Subject: this is a test
Hello from Squeak!
'
usingServer: 'cleon.cc.gatech.edu'
>For those following the notification on mac Swiki issue, here's a summary so
>far, as well as a test Raymond Asselin kindly conducted and asked me to
>forward to the list, as he cannot send to the list for some reason.
>[EMAIL PROTECTED]
>
>summary
>- com 47 swiki 12, VM 2.8.4 on Mac OS 9.1 on a starmax 3000/180 doesn't
>appear to send notifications correctly [my test]
>- same setup on a powermac 7200/120 with Mac OS 8.6 doesn't notify either
>[my test]
>- Adam's tests using (I assume the same downloaded comanche/swiki package
>(?) on a powerbook G3 of some sort don't notify.
>- Raymond's tests (described below) also don't notify.
>
>thoughts
>I'm afraid I don't really have the programming background to probe this a
>lot more, although it would be nice to have notification work. If there is
>any way I can help supply more info I'd be happy to do so. Even without
>notification I'm running the package in an experimental mode for those who
>might wish to check it out: http://163.234.215.23/forum
>Since there is nothing valuable on this test platform, I can share admin
>access to anyone who thinks it might help get to the root of the problem.
>
>Thanks for all the help so far - now I think I see the scope of the problem.
>Dan
>
>--
>Dan Ringrose, Department of History [EMAIL PROTECTED]
>Minot State University, Minot ND 58707 701.858.3037
>
>
>
>
>
>--
>raymond's test follows...
>
>Dan,
> I made some tests on a Mac G3 with MacOS 9.0.4, Com47Swiki12, VM 2.8.4
>for PPC .
>
>Here what I did:
>
> 1. In the Swiki AdminTool>>Setting, I set the alertSender to my own
>email address
> 2. In the Swiki AdminTool>>Setting, I set the alertServer to my own ISP
>SMTP server
> 3. In an existing Swiki a put my email address in the box 'Send e-mail
>alerts to these addresses upon
> next save: ' and save the page
> 4. Edited the page and made some changes...save the page.
> 5. Checked my mailbox...nothing.
> =====
> As the documentation leave place for interpretation I repeat step 3.
>above puting my email address as a
> link instead >> *myName@domainName*
> 4....
> 5....nothing
> =====
>So....
> I made a last test...
> I inserted my email address in the text of a page, as a link =
>*myName@domainName*, and tried it to
>check that I can send messages by email....IT WORKED.
>
> >From what I did I say: 'Send e-mail alerts to these addresses upon
>next save: '
>does'nt work. So now I
>want to check that on a NT 4.0 Server running a Swiki at Work...but I don't
>think the notification will
>work either.
>=====
>I'm a Newbie in Squeak so...people on the list may find I conclude to
>fast...or the problem is
>different :). So please send this answer to the Squeak list for me as I
>did'nt been able to resubscribe from
>the 20 february for reasons I don't understand. I follow the list with
>Hotmail but I'am upset whith that
>setting.
--------------------------
Mark Guzdial : Georgia Tech : College of Computing : Atlanta, GA 30332-0280
Associate Professor - Learning Sciences & Technologies.
Collaborative Software Lab - http://coweb.cc.gatech.edu/csl/
(404) 894-5618 : Fax (404) 894-0673 : [EMAIL PROTECTED]
http://www.cc.gatech.edu/gvu/people/Faculty/Mark.Guzdial.html
