Oww, that hurts! I knew it should be somewhere, but it was right there with the 'png' command: the dpi setting:
png image.png, dpi=300 So, no need to edit anything afterwards... Cheers, Tsjerk On Sun, Oct 11, 2009 at 11:31 AM, Tsjerk Wassenaar <[email protected]> wrote: > Hey :) > > Why revert to powerpoint and or photoshop? First of all, it's not the > image resolution (dpi) that counts, it's the number of pixels, the > geometry. That you can give as argument to ray. Second, if you want a > distance between images of 63 mm, you seem to want a total image > length of 126 mm, which, when taking a 300 dpi printing resolution, > comes down to a total of 300 dpi * 126 mm / 25.4 mm/inch = 1500 > pixels. Then you have to think of the height of your image, but that's > about it. If you want to change the feel of the depth, you can change > the settings for stereo_angle and stereo_shift. > > stereo > fetch 1lw9 > hide > show cartoon > spectrum > ray 1500,1000 > png image.png > > The image does have a printing resolution stored inside, which is > usually set to 72 dpi. You may want to change this, for which you can > use photosphop. But you can also do it using 'convert' from > ImageMagick (which also works on the DOS command line ;)). And you can > change the format to TIFF right away: > > convert -density 300x300 image.png 300dpi.tif > > Hope it helps, > > Tsjerk > > > On Sat, Oct 10, 2009 at 11:10 PM, Bandaranayake, Rajintha > <[email protected]> wrote: >> >> Hi Peter, >> >> I usually assemble stereo images in Photoshop and stay away from PowerPoint. >> However, check out the following link that shows you how to save images in >> hi-res in PowerPoint: >> http://www.motifolio.com/tips2.html >> >> If you write out the images in PowerPoint with the resolution you want you >> should have no issues when you label and write out a new image file in >> Photoshop. >> >> HTH >> >> Cheers, >> -Rajintha >> >> >> -----Original Message----- >> From: peter hudson [mailto:[email protected]] >> Sent: Sat 10/10/2009 2:02 PM >> To: [email protected] >> Subject: [PyMOL] stereo image for publication >> >> Hello all >> I am making stereo image for the publication purpose. I am going through >> this procedure. I save both left and right stereo images from the pymol.i >> use microsift power point bring them ~63mm closer irrespective of their size >> and save them as a image file.Then i use photoshop to label them and save >> them as per the journal requirment DPI. problem comes in the photoshop. i >> cannot maintain the size, DPI as well as stereo image distance >> simulatneously. Since, 63mm distance should be maintaned for the stereoimage >> then i have to compromise with DPI or the image size. If i amintain the >> stereo distance and DPI then i have to compromise with the size. or If i >> maintain the size and stereo distance then i have to compromise DPI. can >> anyone help me? How to maintain all stereoimage distance as well as DPI and >> image size as the journal requires. >> I would greatly appreciate the help. >> >> Thanks in advance >> >> Peter >> >> >> ------------------------------------------------------------------------------ >> Come build with us! The BlackBerry(R) Developer Conference in SF, CA >> is the only developer event you need to attend this year. Jumpstart your >> developing skills, take BlackBerry mobile applications to market and stay >> ahead of the curve. Join us from November 9 - 12, 2009. Register now! >> http://p.sf.net/sfu/devconference >> _______________________________________________ >> PyMOL-users mailing list ([email protected]) >> Info Page: https://lists.sourceforge.net/lists/listinfo/pymol-users >> Archives: http://www.mail-archive.com/[email protected] >> > > > > -- > Tsjerk A. Wassenaar, Ph.D. > Junior UD (post-doc) > Biomolecular NMR, Bijvoet Center > Utrecht University > Padualaan 8 > 3584 CH Utrecht > The Netherlands > P: +31-30-2539931 > F: +31-30-2537623 > -- Tsjerk A. Wassenaar, Ph.D. Junior UD (post-doc) Biomolecular NMR, Bijvoet Center Utrecht University Padualaan 8 3584 CH Utrecht The Netherlands P: +31-30-2539931 F: +31-30-2537623 ------------------------------------------------------------------------------ Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference _______________________________________________ PyMOL-users mailing list ([email protected]) Info Page: https://lists.sourceforge.net/lists/listinfo/pymol-users Archives: http://www.mail-archive.com/[email protected]
