Hi Skew, 2011/12/18 skew 41 <ske...@googlemail.com>: > 2011/12/10 skew 41 <ske...@googlemail.com> >> >> 2011/12/2 Arnd Zapletal <a.zaple...@gmail.com> >>> >>> David García Granda schrieb am 02.12.2011 19:44: >>> > Which device are you trying to import from?. If I am not wrong, >>> > Forerunner 305 stores up to 1000 laps and maybe this issue shows up as >>> > a result of near full storage capacity. >>> >>> yep. skew41 reported Forerunner 305. Probably best and only advise is >>> >>> 1) delete all activities on watch >>> 2) go out running :) >>> 3) import again and report >> >> I am pretty sure that the problem is on pytrainers side. With a manual >> "garmin_save_runs -v" I get all data as expected. So it is in the device and >> it is read correctly. Actually with newer runs everything works fine again. >> So there are just a few runs in November where no proper data is available >> in pytrainer. Though there are .gmn and .dump files under ~/.pytrainer/tmp/ >> (without the gps information), these runs do not show up in the pytrainer >> user interface. I guess something went wrong during some import. >> >> Can someone tell me which data I have to possibly delete from the >> pytrainer database and which files are possibly to be deleted so that I can >> do a new import via garmintools. My hope would be that these old entries are >> then correctly importet. > > > I inspected the sqlite database and I did not found any entries in the > records table for the runs that do not show up in pytrainer (these are those > where the GPX data is missing in the .dump and .gmn files). So the only > indication of these tracks in pytrainer that I see are these .gmn and .dump > files in the tmp directory. > > I therefore deleted these files in the hope that these runs would be > properly imported when I would run the import via garmintools again. After a > new import via garmintools I find again the corresponding .gmn files under > ~/.pytrainer/tmp/2011/11, again of very small size, so probably without the > GPS data. In contract to the situation before, there are no .dump files > corresponding to them and these runs also do not show up in pytrainer at > all. > > When doing a manual run of "garmin_save_runs -v" now I get only "big" (i.e. > probably with GPS data) files for the last 8 runs. For the previous ones I > only get the main data about the run and these runs are not imported > properly into pytrainer. > > I guess the reason is the following: Some time ago I changed the data > recording setting of my Forerunner 305 from "smart recording" to "every > second", since my impression was that data was not very accurate. So maybe > the GPS data of the old runs was deleted meanwhile.
As far as I know Garmin Forerunner 305 stores up to 1000 laps data and when it needs more space starts deleting old (lap) entries. > I would now like to actually delete all data on the watch to start again. > But I found no way to do so. Do you know how it can be done? Naming may vary as I have my unit in spanish, but please have a look at the following step by step mini guide: 1.- Start your fore 305 and go to "History" menu, you will see all sports you have saved your workouts under, including "Other". 2.- Going to each one will show you a new screen where "Delete..." option is at the bottom. 3.- Selecting "Delete..." option will forward you to a last screen where you can remove all workouts saved under selected sport. 4.- Repeat operation from #2 for all sports shown in step #1 Hope it helps, David ------------------------------------------------------------------------------ Write once. Port to many. Get the SDK and tools to simplify cross-platform app development. Create new or port existing apps to sell to consumers worldwide. Explore the Intel AppUpSM program developer opportunity. appdeveloper.intel.com/join http://p.sf.net/sfu/intel-appdev _______________________________________________ Pytrainer-devel mailing list Pytrainer-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/pytrainer-devel
