I'll try to install the filter package. I seem to recall reading about not installing the filter version because it was 'broken'. I did create an .inf for my device & XP does load the driver when I attach my device. When I look in Device Manager I can see my device there with no yellow flag.
Thanks Mark On Fri, 2010-05-28 at 16:56 -0300, Wander Lairson wrote: > Try to uinstall libusb and install this package: > https://sourceforge.net/projects/libusb-win32/files/libusb-win32-snapshots/20100519/libusb-win32-filter-bin-20100519.exe/download. > I think you have to install libusb-win32 as a filter driver, otherwise you > will have to create an inf file for your device and replace its driver... > > Wander > > 2010/5/28 Mark <m...@absamail.co.za> > Yes, testlibusb-win.exe does not produce any output other than > the app > version numbers at the top of the window. The bin I've > downloaded is > libusb-win32-device-bin-20100519. I've tried completely > uninstalling > pyusb, python & libusb and re-installing in order libusb, > python, pyusb > but still get the same result. > > Mark > > > On Fri, 2010-05-28 at 13:47 -0300, Wander Lairson wrote: > > It feels like something wrong with libusb installation... > Have you > > tried the libusb-win32 test application? > > > > Wander > > > > 2010/5/28 Mark <m...@absamail.co.za> > > Hello, I have a PC that dual boots Ubuntu 8.04 and > Win XP SP2. > > On both > > Ubuntu and XP I have Python 2.5.2 and Pyusb 0.4.1 > installed > > and on XP I > > also installed libusb-win32 0.1.12.1. On both OSes I > type the > > following > > at the interactive prompt: > > >>> import usb > > >>> b = usb.busses() > > >>> print b[1].devices > > > > My output on Ubuntu is: > > (<usb.Device object at 0x8228d58>, <usb.Device > object at > > 0x8229f78>, > > <usb.Device object at 0x822b198>, <usb.Device object > at > > 0x822c3b8>)) > > >>> > > > > My output on XP is: > > () > > >>> > > > > Ubuntu finds 4 devices on bus 1, XP finds nothing or > doesn't > > display it. > > In fact XP displays no devices on any of the busses > whereas > > Ubuntu shows > > devices on all busses. When running 'usbenum.py', I > get the > > correct > > output on Ubuntu but on XP I get: > > found 4 busses > > === new bus === > > === new bus === > > === new bus === > > === new bus === > > >>> > > > > Also Ubuntu detects 5 busses on the machine but XP > only > > detects 4. > > > > I'm probably missing something obvious but I can't > figure it > > out. Any > > help or suggestions will be appreciated. > > > > Thanks > > Mark > > > > > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > > pyusb-users mailing list > > pyusb-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/pyusb-users > > > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > > pyusb-users mailing list > > pyusb-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/pyusb-users > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > pyusb-users mailing list > pyusb-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/pyusb-users > > > ------------------------------------------------------------------------------ > > _______________________________________________ > pyusb-users mailing list > pyusb-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/pyusb-users ------------------------------------------------------------------------------ _______________________________________________ pyusb-users mailing list pyusb-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/pyusb-users