The VIA82C686B IDE controller is a PCI device, it will be reset when the PCI bus it stands on is reset.
Convert its reset handler into a proper Device reset method. Signed-off-by: Philippe Mathieu-Daudé <phi...@redhat.com> --- hw/ide/via.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/hw/ide/via.c b/hw/ide/via.c index 7087dc676e..053622bd82 100644 --- a/hw/ide/via.c +++ b/hw/ide/via.c @@ -29,7 +29,6 @@ #include "migration/vmstate.h" #include "qemu/module.h" #include "sysemu/dma.h" -#include "sysemu/reset.h" #include "hw/ide/pci.h" #include "trace.h" @@ -120,10 +119,10 @@ static void via_ide_set_irq(void *opaque, int n, int level) } } -static void via_ide_reset(void *opaque) +static void via_ide_reset(DeviceState *dev) { - PCIIDEState *d = opaque; - PCIDevice *pd = PCI_DEVICE(d); + PCIIDEState *d = PCI_IDE(dev); + PCIDevice *pd = PCI_DEVICE(dev); uint8_t *pci_conf = pd->config; int i; @@ -172,8 +171,6 @@ static void via_ide_realize(PCIDevice *dev, Error **errp) pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0); dev->wmask[PCI_INTERRUPT_LINE] = 0xf; - qemu_register_reset(via_ide_reset, d); - memory_region_init_io(&d->data_bar[0], OBJECT(d), &pci_ide_data_le_ops, &d->bus[0], "via-ide0-data", 8); pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[0]); @@ -229,6 +226,7 @@ static void via_ide_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + dc->reset = via_ide_reset; k->realize = via_ide_realize; k->exit = via_ide_exitfn; k->vendor_id = PCI_VENDOR_ID_VIA; -- 2.21.0