Hello Jamin,
To handle the DMA DRAM Side Address High register, we should reintroduce
an "dram-base" property which I removed a while ago. Something like :
diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h
index 7f32e43ff6f3..6d8ef6bc968f 100644
--- a/include/hw/ssi/aspeed_smc.h
+++ b/include/hw/ssi/aspeed_smc.h
@@ -76,6 +76,7 @@ struct AspeedSMCState {
AddressSpace flash_as;
MemoryRegion *dram_mr;
AddressSpace dram_as;
+ uint64_t dram_base;
AddressSpace wdt2_as;
MemoryRegion *wdt2_mr;
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 38858e4fdec1..3417949ad8a3 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -500,6 +500,8 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev,
Error **errp)
}
/* FMC, The number of CS is set at the board level */
+ object_property_set_int(OBJECT(&s->fmc), "dram-base",
+ sc->memmap[ASPEED_DEV_SDRAM], &error_abort);
object_property_set_link(OBJECT(&s->fmc), "dram", OBJECT(s->dram_mr),
&error_abort);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->fmc), errp)) {
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index 3fa783578e9e..29ebfc0fd8c8 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -1372,6 +1372,7 @@ static const VMStateDescription vmstate_aspeed_smc = {
static Property aspeed_smc_properties[] = {
DEFINE_PROP_BOOL("inject-failure", AspeedSMCState, inject_failure, false),
+ DEFINE_PROP_UINT64("dram-base", AspeedSMCState, dram_base, 0),
DEFINE_PROP_LINK("dram", AspeedSMCState, dram_mr,
TYPE_MEMORY_REGION, MemoryRegion *),
DEFINE_PROP_LINK("wdt2", AspeedSMCState, wdt2_mr,
With that, see below for more comments,
On 4/16/24 11:18, Jamin Lin wrote:
AST2700 support the maximum dram size is 8GiB
and has a "DMA DRAM Side Address High Part(0x7C)"
register to support 64 bits dma dram address.
Add helper routines functions to compute the dma dram
address, new features and update trace-event
to support 64 bits dram address.
Signed-off-by: Troy Lee <troy_...@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_...@aspeedtech.com>
---
hw/ssi/aspeed_smc.c | 66 +++++++++++++++++++++++++++++++++++++++------
hw/ssi/trace-events | 2 +-
2 files changed, 59 insertions(+), 9 deletions(-)
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index 71abc7a2d8..a67cac3d0f 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -132,6 +132,9 @@
#define FMC_WDT2_CTRL_BOOT_SOURCE BIT(4) /* O: primary 1: alternate */
#define FMC_WDT2_CTRL_EN BIT(0)
+/* DMA DRAM Side Address High Part (AST2700) */
+#define R_DMA_DRAM_ADDR_HIGH (0x7c / 4)
+
/* DMA Control/Status Register */
#define R_DMA_CTRL (0x80 / 4)
#define DMA_CTRL_REQUEST (1 << 31)
@@ -187,6 +190,7 @@
* 0x1FFFFFF: 32M bytes
*/
#define DMA_DRAM_ADDR(asc, val) ((val) & (asc)->dma_dram_mask)
+#define DMA_DRAM_ADDR_HIGH(val) ((val) & 0xf)
#define DMA_FLASH_ADDR(asc, val) ((val) & (asc)->dma_flash_mask)
#define DMA_LENGTH(val) ((val) & 0x01FFFFFF)
@@ -207,6 +211,7 @@ static const AspeedSegments aspeed_2500_spi2_segments[];
#define ASPEED_SMC_FEATURE_DMA 0x1
#define ASPEED_SMC_FEATURE_DMA_GRANT 0x2
#define ASPEED_SMC_FEATURE_WDT_CONTROL 0x4
+#define ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH 0x08
static inline bool aspeed_smc_has_dma(const AspeedSMCClass *asc)
{
@@ -218,6 +223,11 @@ static inline bool aspeed_smc_has_wdt_control(const
AspeedSMCClass *asc)
return !!(asc->features & ASPEED_SMC_FEATURE_WDT_CONTROL);
}
+static inline bool aspeed_smc_has_dma_dram_addr_high(const AspeedSMCClass *asc)
+{
+ return !!(asc->features & ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH);
+}
+
#define aspeed_smc_error(fmt, ...) \
qemu_log_mask(LOG_GUEST_ERROR, "%s: " fmt "\n", __func__, ## __VA_ARGS__)
@@ -747,6 +757,9 @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size)
(aspeed_smc_has_dma(asc) && addr == R_DMA_CTRL) ||
(aspeed_smc_has_dma(asc) && addr == R_DMA_FLASH_ADDR) ||
(aspeed_smc_has_dma(asc) && addr == R_DMA_DRAM_ADDR) ||
+ (aspeed_smc_has_dma(asc) &&
+ aspeed_smc_has_dma_dram_addr_high(asc) &&
+ addr == R_DMA_DRAM_ADDR_HIGH) ||
(aspeed_smc_has_dma(asc) && addr == R_DMA_LEN) ||
(aspeed_smc_has_dma(asc) && addr == R_DMA_CHECKSUM) ||
(addr >= R_SEG_ADDR0 &&
@@ -847,6 +860,23 @@ static bool aspeed_smc_inject_read_failure(AspeedSMCState
*s)
}
}
+static uint64_t aspeed_smc_dma_dram_addr(AspeedSMCState *s)
+{
+ AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s);
+ uint64_t dram_addr_high;
+ uint64_t dma_dram_addr;
+
+ if (aspeed_smc_has_dma_dram_addr_high(asc)) {
+ dram_addr_high = s->regs[R_DMA_DRAM_ADDR_HIGH];
+ dram_addr_high <<= 32;
+ dma_dram_addr = dram_addr_high | s->regs[R_DMA_DRAM_ADDR];
+ } else {
+ dma_dram_addr = s->regs[R_DMA_DRAM_ADDR];
+ }
+
+ return dma_dram_addr;
+}
+
static uint32_t aspeed_smc_dma_len(AspeedSMCState *s)
{
AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s);
@@ -914,24 +944,34 @@ static void aspeed_smc_dma_checksum(AspeedSMCState *s)
static void aspeed_smc_dma_rw(AspeedSMCState *s)
{
+ AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s);
+ uint64_t dram_addr_high;
dram_addr_high can be removed
+ uint64_t dma_dram_addr;
+ uint64_t dram_addr;
please call this variable dma_dram_offset, I found it less confusing.
MemTxResult result;
uint32_t dma_len;
uint32_t data;
dma_len = aspeed_smc_dma_len(s);
+ dma_dram_addr = aspeed_smc_dma_dram_addr(s);
+
+ if (aspeed_smc_has_dma_dram_addr_high(asc)) {
+ dram_addr = dma_dram_addr - s->dram_mr->container->addr;
+ } else {
+ dram_addr = dma_dram_addr;
+ }
With the new "dram-base" property, the above if can be replaced by :
dma_dram_offset = dma_dram_addr - s->dram_base;
Thanks,
C.
trace_aspeed_smc_dma_rw(s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE ?
"write" : "read",
s->regs[R_DMA_FLASH_ADDR],
- s->regs[R_DMA_DRAM_ADDR],
+ dram_addr,
dma_len);
while (dma_len) {
if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) {
- data = address_space_ldl_le(&s->dram_as, s->regs[R_DMA_DRAM_ADDR],
+ data = address_space_ldl_le(&s->dram_as, dram_addr,
MEMTXATTRS_UNSPECIFIED, &result);
if (result != MEMTX_OK) {
- aspeed_smc_error("DRAM read failed @%08x",
- s->regs[R_DMA_DRAM_ADDR]);
+ aspeed_smc_error("DRAM read failed @%" PRIx64, dram_addr);
return;
}
@@ -951,11 +991,10 @@ static void aspeed_smc_dma_rw(AspeedSMCState *s)
return;
}
- address_space_stl_le(&s->dram_as, s->regs[R_DMA_DRAM_ADDR],
+ address_space_stl_le(&s->dram_as, dram_addr,
data, MEMTXATTRS_UNSPECIFIED, &result);
if (result != MEMTX_OK) {
- aspeed_smc_error("DRAM write failed @%08x",
- s->regs[R_DMA_DRAM_ADDR]);
+ aspeed_smc_error("DRAM write failed @%" PRIx64, dram_addr);
return;
}
}
@@ -964,8 +1003,15 @@ static void aspeed_smc_dma_rw(AspeedSMCState *s)
* When the DMA is on-going, the DMA registers are updated
* with the current working addresses and length.
*/
+ dram_addr += 4;
+ dma_dram_addr += 4;
+ if (aspeed_smc_has_dma_dram_addr_high(asc)) {
+ dram_addr_high = dma_dram_addr >> 32;
+ s->regs[R_DMA_DRAM_ADDR_HIGH] = dram_addr_high;
+ }
+
+ s->regs[R_DMA_DRAM_ADDR] = dma_dram_addr & 0xffffffff;
s->regs[R_DMA_FLASH_ADDR] += 4;
- s->regs[R_DMA_DRAM_ADDR] += 4;
dma_len -= 4;
s->regs[R_DMA_LEN] = dma_len;
s->regs[R_DMA_CHECKSUM] += data;
@@ -1118,6 +1164,10 @@ static void aspeed_smc_write(void *opaque, hwaddr addr,
uint64_t data,
} else if (aspeed_smc_has_dma(asc) && addr == R_DMA_LEN &&
aspeed_smc_dma_granted(s)) {
s->regs[addr] = DMA_LENGTH(value);
+ } else if (aspeed_smc_has_dma(asc) &&
+ aspeed_smc_has_dma_dram_addr_high(asc) &&
+ addr == R_DMA_DRAM_ADDR_HIGH) {
+ s->regs[addr] = DMA_DRAM_ADDR_HIGH(value);
} else {
qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n",
__func__, addr);
diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events
index 2d5bd2b83d..7b5ad6a939 100644
--- a/hw/ssi/trace-events
+++ b/hw/ssi/trace-events
@@ -6,7 +6,7 @@ aspeed_smc_do_snoop(int cs, int index, int dummies, int data)
"CS%d index:0x%x d
aspeed_smc_flash_write(int cs, uint64_t addr, uint32_t size, uint64_t data, int mode) "CS%d
@0x%" PRIx64 " size %u: 0x%" PRIx64" mode:%d"
aspeed_smc_read(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size
%u: 0x%" PRIx64
aspeed_smc_dma_checksum(uint32_t addr, uint32_t data) "0x%08x: 0x%08x"
-aspeed_smc_dma_rw(const char *dir, uint32_t flash_addr, uint32_t dram_addr, uint32_t
size) "%s flash:@0x%08x dram:@0x%08x size:0x%08x"
+aspeed_smc_dma_rw(const char *dir, uint32_t flash_addr, uint64_t dram_addr, uint32_t size)
"%s flash:@0x%08x dram:@0x%" PRIx64 " size:0x%08x"
aspeed_smc_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 "
size %u: 0x%" PRIx64
aspeed_smc_flash_select(int cs, const char *prefix) "CS%d %sselect"
