Hi Cedric,
> Subject: Re: [PATCH v1 03/15] hw/i2c/aspeed: support to set the different
> memory size
>
> On 7/18/24 08:49, Jamin Lin wrote:
> > According to the datasheet of ASPEED SOCs, an I2C controller owns 8KB
> > of register space for AST2700, owns 4KB of register space for AST2600,
> > AST2500 and AST2400, and owns 64KB of register space for AST1030.
> >
> > It set the memory region size 4KB by default and it does not
> > compatible register space for AST2700.
> >
> > Introduce a new class attribute to set the I2C controller memory size
> > for different ASPEED SOCs.
> >
> > Signed-off-by: Jamin Lin <jamin_...@aspeedtech.com>
> > ---
> > hw/i2c/aspeed_i2c.c | 6 +++++-
> > include/hw/i2c/aspeed_i2c.h | 2 +-
> > 2 files changed, 6 insertions(+), 2 deletions(-)
> >
> > diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index
> > b43afd250d..7d5a53c4c0 100644
> > --- a/hw/i2c/aspeed_i2c.c
> > +++ b/hw/i2c/aspeed_i2c.c
> > @@ -1014,7 +1014,7 @@ static void aspeed_i2c_realize(DeviceState *dev,
> > Error **errp)
> >
> > sysbus_init_irq(sbd, &s->irq);
> > memory_region_init_io(&s->iomem, OBJECT(s),
> &aspeed_i2c_ctrl_ops, s,
> > - "aspeed.i2c", 0x1000);
> > + "aspeed.i2c", aic->mem_size);
> > sysbus_init_mmio(sbd, &s->iomem);
> >
> > for (i = 0; i < aic->num_busses; i++) { @@ -1286,6 +1286,7 @@
> > static void aspeed_2400_i2c_class_init(ObjectClass *klass, void *data)
> > aic->pool_size = 0x800;
> > aic->pool_base = 0x800;
> > aic->bus_pool_base = aspeed_2400_i2c_bus_pool_base;
> > + aic->mem_size = 0x1000;
> > }
> >
> > static const TypeInfo aspeed_2400_i2c_info = { @@ -1320,6 +1321,7 @@
> > static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data)
> > aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base;
> > aic->check_sram = true;
> > aic->has_dma = true;
> > + aic->mem_size = 0x1000;
> > }
> >
> > static const TypeInfo aspeed_2500_i2c_info = { @@ -1353,6 +1355,7 @@
> > static void aspeed_2600_i2c_class_init(ObjectClass *klass, void *data)
> > aic->pool_base = 0xC00;
> > aic->bus_pool_base = aspeed_2600_i2c_bus_pool_base;
> > aic->has_dma = true;
> > + aic->mem_size = 0x1000;
> > }
> >
> > static const TypeInfo aspeed_2600_i2c_info = { @@ -1376,6 +1379,7 @@
> > static void aspeed_1030_i2c_class_init(ObjectClass *klass, void *data)
> > aic->pool_base = 0xC00;
> > aic->bus_pool_base = aspeed_2600_i2c_bus_pool_base;
> > aic->has_dma = true;
> > + aic->mem_size = 0x10000;
>
Thanks for review.
According to the datasheet of AST1030 in chapter 7 (Memory Space Allocation
Table)
, the register address space of I2C Controller range is start from 7E7B0000 to
7E7BFFFF and its register address space is 64KB(0x10000).
The firmware only use 4KB address space. We can change mem_size either 4KB or
64KB.
Could you tell me which size you prefer?
Thanks-Jamin
> Are you sure this value is correct ?
>
>
> Thanks,
>
> C.
>
>
> > }
> >
> > static const TypeInfo aspeed_1030_i2c_info = { diff --git
> > a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h index
> > a064479e59..065b636d29 100644
> > --- a/include/hw/i2c/aspeed_i2c.h
> > +++ b/include/hw/i2c/aspeed_i2c.h
> > @@ -283,7 +283,7 @@ struct AspeedI2CClass {
> > uint8_t *(*bus_pool_base)(AspeedI2CBus *);
> > bool check_sram;
> > bool has_dma;
> > -
> > + uint64_t mem_size;
> > };
> >
> > static inline bool aspeed_i2c_is_new_mode(AspeedI2CState *s)
************* Email Confidentiality Notice ********************
免責聲明:
本信件(或其附件)可能包含機密資訊，並受法律保護。如 台端非指定之收件者，請以電子郵件通知本電子郵件之發送者,
並請立即刪除本電子郵件及其附件和銷毀所有複印件。謝謝您的合作!
DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other
confidential information. If you have received it in error, please notify the
sender by reply e-mail and immediately delete the e-mail and any attachments
without copying or disclosing the contents. Thank you.
