From: "Jason A. Donenfeld" <ja...@zx2c4.com> In order to support additional channels of communication using `-serial`, add several serial ports, up to the standard 4 generally supported by the 8250 driver.
Fixed: https://lore.kernel.org/all/20240907143439.2792924-1-ja...@zx2c4.com/ Signed-off-by: Jason A. Donenfeld <ja...@zx2c4.com> Tested-by: Bibo Mao <maob...@loongson.cn> [gaosong: ACPI uart need't reverse order] Signed-off-by: Song Gao <gaos...@loongson.cn> Message-Id: <20240907143439.2792924-1-ja...@zx2c4.com> --- hw/loongarch/acpi-build.c | 23 +++++++++++++++-------- hw/loongarch/virt.c | 27 +++++++++++++++++---------- include/hw/pci-host/ls7a.h | 9 +++++---- 3 files changed, 37 insertions(+), 22 deletions(-) diff --git a/hw/loongarch/acpi-build.c b/hw/loongarch/acpi-build.c index 2638f87434..04107c84ba 100644 --- a/hw/loongarch/acpi-build.c +++ b/hw/loongarch/acpi-build.c @@ -31,6 +31,7 @@ #include "hw/acpi/generic_event_device.h" #include "hw/pci-host/gpex.h" +#include "sysemu/sysemu.h" #include "sysemu/tpm.h" #include "hw/platform-bus.h" #include "hw/acpi/aml-build.h" @@ -252,23 +253,27 @@ struct AcpiBuildState { MemoryRegion *linker_mr; } AcpiBuildState; -static void build_uart_device_aml(Aml *table) +static void build_uart_device_aml(Aml *table, int index) { Aml *dev; Aml *crs; Aml *pkg0, *pkg1, *pkg2; - uint32_t uart_irq = VIRT_UART_IRQ; - - Aml *scope = aml_scope("_SB"); - dev = aml_device("COMA"); + Aml *scope; + uint32_t uart_irq; + uint64_t base; + + uart_irq = VIRT_UART_IRQ + index; + base = VIRT_UART_BASE + index * VIRT_UART_SIZE; + scope = aml_scope("_SB"); + dev = aml_device("COM%d", index); aml_append(dev, aml_name_decl("_HID", aml_string("PNP0501"))); - aml_append(dev, aml_name_decl("_UID", aml_int(0))); + aml_append(dev, aml_name_decl("_UID", aml_int(index))); aml_append(dev, aml_name_decl("_CCA", aml_int(1))); crs = aml_resource_template(); aml_append(crs, aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED, AML_NON_CACHEABLE, AML_READ_WRITE, - 0, VIRT_UART_BASE, VIRT_UART_BASE + VIRT_UART_SIZE - 1, + 0, base, base + VIRT_UART_SIZE - 1, 0, VIRT_UART_SIZE)); aml_append(crs, aml_interrupt(AML_CONSUMER, AML_LEVEL, AML_ACTIVE_HIGH, AML_SHARED, &uart_irq, 1)); @@ -401,6 +406,7 @@ static void acpi_dsdt_add_tpm(Aml *scope, LoongArchVirtMachineState *vms) static void build_dsdt(GArray *table_data, BIOSLinker *linker, MachineState *machine) { + int i; Aml *dsdt, *scope, *pkg; LoongArchVirtMachineState *lvms = LOONGARCH_VIRT_MACHINE(machine); AcpiTable table = { .sig = "DSDT", .rev = 1, .oem_id = lvms->oem_id, @@ -408,7 +414,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, MachineState *machine) acpi_table_begin(&table, table_data); dsdt = init_aml_allocator(); - build_uart_device_aml(dsdt); + for (i = 0; i < VIRT_UART_COUNT; i++) + build_uart_device_aml(dsdt, i); build_pci_device_aml(dsdt, lvms); build_la_ged_aml(dsdt, machine); build_flash_aml(dsdt, lvms); diff --git a/hw/loongarch/virt.c b/hw/loongarch/virt.c index 29040422aa..76dd29a391 100644 --- a/hw/loongarch/virt.c +++ b/hw/loongarch/virt.c @@ -280,10 +280,10 @@ static void fdt_add_rtc_node(LoongArchVirtMachineState *lvms, } static void fdt_add_uart_node(LoongArchVirtMachineState *lvms, - uint32_t *pch_pic_phandle) + uint32_t *pch_pic_phandle, hwaddr base, + int irq, bool chosen) { char *nodename; - hwaddr base = VIRT_UART_BASE; hwaddr size = VIRT_UART_SIZE; MachineState *ms = MACHINE(lvms); @@ -292,9 +292,9 @@ static void fdt_add_uart_node(LoongArchVirtMachineState *lvms, qemu_fdt_setprop_string(ms->fdt, nodename, "compatible", "ns16550a"); qemu_fdt_setprop_cells(ms->fdt, nodename, "reg", 0x0, base, 0x0, size); qemu_fdt_setprop_cell(ms->fdt, nodename, "clock-frequency", 100000000); - qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", nodename); - qemu_fdt_setprop_cells(ms->fdt, nodename, "interrupts", - VIRT_UART_IRQ - VIRT_GSI_BASE, 0x4); + if (chosen) + qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", nodename); + qemu_fdt_setprop_cells(ms->fdt, nodename, "interrupts", irq, 0x4); qemu_fdt_setprop_cell(ms->fdt, nodename, "interrupt-parent", *pch_pic_phandle); g_free(nodename); @@ -706,11 +706,18 @@ static void virt_devices_init(DeviceState *pch_pic, /* Add pcie node */ fdt_add_pcie_node(lvms, pch_pic_phandle, pch_msi_phandle); - serial_mm_init(get_system_memory(), VIRT_UART_BASE, 0, - qdev_get_gpio_in(pch_pic, - VIRT_UART_IRQ - VIRT_GSI_BASE), - 115200, serial_hd(0), DEVICE_LITTLE_ENDIAN); - fdt_add_uart_node(lvms, pch_pic_phandle); + /* + * Create uart fdt node in reverse order so that they appear + * in the finished device tree lowest address first + */ + for (i = VIRT_UART_COUNT; i --> 0;) { + hwaddr base = VIRT_UART_BASE + i * VIRT_UART_SIZE; + int irq = VIRT_UART_IRQ + i - VIRT_GSI_BASE; + serial_mm_init(get_system_memory(), base, 0, + qdev_get_gpio_in(pch_pic, irq), + 115200, serial_hd(i), DEVICE_LITTLE_ENDIAN); + fdt_add_uart_node(lvms, pch_pic_phandle, base, irq, i == 0); + } /* Network init */ pci_init_nic_devices(pci_bus, mc->default_nic); diff --git a/include/hw/pci-host/ls7a.h b/include/hw/pci-host/ls7a.h index cd7c9ec7bc..79d4ea8501 100644 --- a/include/hw/pci-host/ls7a.h +++ b/include/hw/pci-host/ls7a.h @@ -36,17 +36,18 @@ #define VIRT_PCH_PIC_IRQ_NUM 32 #define VIRT_GSI_BASE 64 #define VIRT_DEVICE_IRQS 16 +#define VIRT_UART_COUNT 4 #define VIRT_UART_IRQ (VIRT_GSI_BASE + 2) #define VIRT_UART_BASE 0x1fe001e0 -#define VIRT_UART_SIZE 0X100 -#define VIRT_RTC_IRQ (VIRT_GSI_BASE + 3) +#define VIRT_UART_SIZE 0x100 +#define VIRT_RTC_IRQ (VIRT_GSI_BASE + 6) #define VIRT_MISC_REG_BASE (VIRT_PCH_REG_BASE + 0x00080000) #define VIRT_RTC_REG_BASE (VIRT_MISC_REG_BASE + 0x00050100) #define VIRT_RTC_LEN 0x100 -#define VIRT_SCI_IRQ (VIRT_GSI_BASE + 4) +#define VIRT_SCI_IRQ (VIRT_GSI_BASE + 7) #define VIRT_PLATFORM_BUS_BASEADDRESS 0x16000000 #define VIRT_PLATFORM_BUS_SIZE 0x2000000 #define VIRT_PLATFORM_BUS_NUM_IRQS 2 -#define VIRT_PLATFORM_BUS_IRQ (VIRT_GSI_BASE + 5) +#define VIRT_PLATFORM_BUS_IRQ (VIRT_GSI_BASE + 8) #endif -- 2.34.1
