----- Original Message ----- > From: "Raj Rajasekaran" <r...@connecttel.com> > To: "Andrew Cathrow" <acath...@redhat.com> > Cc: qemu-devel@nongnu.org > Sent: Tuesday, April 24, 2012 12:09:32 PM > Subject: Re: [Qemu-devel] Spice vdagent on SLED 11 > > > Here it is > > > > qemu -vga qxl -device qxl -global qxl-vga.vram_size=33554432 -device > virtio-serial -chardev spicevmc,id=vdagent,debug=0,name=vdagent > -device virtserialport,chardev=vdagent,name=com.redhat.spice.0 > -spice port=$SPICE_PORT,image-compression=off,disable-ticketing > -enable-kvm -m 1024 -net > nic,model=e1000,vlan=0,macaddr=52:54:84:fe:00:02 -net > user,vlan=1,hostfwd=tcp::2222-:22 -net nic,model=e1000,vlan=1 > -monitor stdio
So the right config is being passed to KVM. You can run lspci in the virtual machine to make sure the right PCI devices are being exposed. Then presuming the guest as virtio-serial support (and I don't know if SLED11 has that compiled in) then you'll see /dev/vport* (and potentially symlinks in /dev/virtio-ports/ depending on how udev is setup in SLED) > > > > > > On Tue, Apr 24, 2012 at 11:03 AM, Andrew Cathrow < > acath...@redhat.com > wrote: > > > do you have the configuration ? is there a libvirt xml, or a command > line in a script? > > > ----- Original Message ----- > > From: "Raj Rajasekaran" < r...@connecttel.com > > > To: "Andrew Cathrow" < acath...@redhat.com > > > Cc: qemu-devel@nongnu.org > > > > Sent: Tuesday, April 24, 2012 11:59:07 AM > > Subject: Re: [Qemu-devel] Spice vdagent on SLED 11 > > > > > > Yes. > > > > > > On Tue, Apr 24, 2012 at 10:48 AM, Andrew Cathrow < > > acath...@redhat.com > wrote: > > > > > > > > > > > > ----- Original Message ----- > > > From: "Raj Rajasekaran" < r...@connecttel.com > > > > > > To: "Andrew Cathrow" < acath...@redhat.com > > > > Cc: qemu-devel@nongnu.org > > > Sent: Tuesday, April 24, 2012 11:43:12 AM > > > Subject: Re: [Qemu-devel] Spice vdagent on SLED 11 > > > > > > > > > Where do I check whether VM is configured to expose this virtio > > > serial device? If not how to configure it. > > > > > > > Did you start/configure the VM? > > > > > > > > > > > > > > On Mon, Apr 23, 2012 at 7:45 PM, Andrew Cathrow < > > > acath...@redhat.com > > > > wrote: > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > From: "Raj Rajasekaran" < r...@connecttel.com > > > > > To: qemu-devel@nongnu.org > > > > Sent: Monday, April 23, 2012 11:35:56 AM > > > > Subject: [Qemu-devel] Spice vdagent on SLED 11 > > > > > > > > I am not able to get Spice vdagent running on SLED 11 virtual > > > > machine. Log file has the error message 'Missing virtio device > > > > '/dev/virtio-ports/com.redhat.spice.0'. I am using Qemu v0.15.1 > > > > and > > > > Spice v0.10.0. > > > > > > > > > > > > Has anyone got this work under SLED11? > > > > > > Is your VM configured to expost a virtio-serial device named > > > com.redhat.spice.0 ? > > > > > > -chardev spicevmc,id=charchannel0,name=vdagent > > > -device > > > virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.spice.0 > > > > > > > > > or > > > > > > > > > <controller type='virtio-serial' index='0'/> > > > <channel type='spicevmc'> > > > <target type='virtio' name='com.redhat.spice.0'/> > > > <address type='virtio-serial' controller='0' bus='0' port='1'/> > > > </channel> > > > > > > > > > > > > > > > > > > > > > -Raj > > > > > > > > > > > >
