lspci listed 'Communication Controller Virtio console' as one of the devices exposed. But I did not see any /dev/vport*.
On Tue, Apr 24, 2012 at 12:17 PM, Andrew Cathrow <acath...@redhat.com>wrote: > > > ----- Original Message ----- > > From: "Raj Rajasekaran" <r...@connecttel.com> > > To: "Andrew Cathrow" <acath...@redhat.com> > > Cc: qemu-devel@nongnu.org > > Sent: Tuesday, April 24, 2012 12:09:32 PM > > Subject: Re: [Qemu-devel] Spice vdagent on SLED 11 > > > > > > Here it is > > > > > > > > qemu -vga qxl -device qxl -global qxl-vga.vram_size=33554432 -device > > virtio-serial -chardev spicevmc,id=vdagent,debug=0,name=vdagent > > -device virtserialport,chardev=vdagent,name=com.redhat.spice.0 > > -spice port=$SPICE_PORT,image-compression=off,disable-ticketing > > -enable-kvm -m 1024 -net > > nic,model=e1000,vlan=0,macaddr=52:54:84:fe:00:02 -net > > user,vlan=1,hostfwd=tcp::2222-:22 -net nic,model=e1000,vlan=1 > > -monitor stdio > > So the right config is being passed to KVM. > You can run lspci in the virtual machine to make sure the right PCI > devices are being exposed. > Then presuming the guest as virtio-serial support (and I don't know if > SLED11 has that compiled in) then you'll see /dev/vport* (and potentially > symlinks in /dev/virtio-ports/ depending on how udev is setup in SLED) > > > > > > > > > > > > > > > > On Tue, Apr 24, 2012 at 11:03 AM, Andrew Cathrow < > > acath...@redhat.com > wrote: > > > > > > do you have the configuration ? is there a libvirt xml, or a command > > line in a script? > > > > > > ----- Original Message ----- > > > From: "Raj Rajasekaran" < r...@connecttel.com > > > > To: "Andrew Cathrow" < acath...@redhat.com > > > > Cc: qemu-devel@nongnu.org > > > > > > > Sent: Tuesday, April 24, 2012 11:59:07 AM > > > Subject: Re: [Qemu-devel] Spice vdagent on SLED 11 > > > > > > > > > Yes. > > > > > > > > > On Tue, Apr 24, 2012 at 10:48 AM, Andrew Cathrow < > > > acath...@redhat.com > wrote: > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > From: "Raj Rajasekaran" < r...@connecttel.com > > > > > > > > To: "Andrew Cathrow" < acath...@redhat.com > > > > > Cc: qemu-devel@nongnu.org > > > > Sent: Tuesday, April 24, 2012 11:43:12 AM > > > > Subject: Re: [Qemu-devel] Spice vdagent on SLED 11 > > > > > > > > > > > > Where do I check whether VM is configured to expose this virtio > > > > serial device? If not how to configure it. > > > > > > > > > > Did you start/configure the VM? > > > > > > > > > > > > > > > > > > > > On Mon, Apr 23, 2012 at 7:45 PM, Andrew Cathrow < > > > > acath...@redhat.com > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Raj Rajasekaran" < r...@connecttel.com > > > > > > To: qemu-devel@nongnu.org > > > > > Sent: Monday, April 23, 2012 11:35:56 AM > > > > > Subject: [Qemu-devel] Spice vdagent on SLED 11 > > > > > > > > > > I am not able to get Spice vdagent running on SLED 11 virtual > > > > > machine. Log file has the error message 'Missing virtio device > > > > > '/dev/virtio-ports/com.redhat.spice.0'. I am using Qemu v0.15.1 > > > > > and > > > > > Spice v0.10.0. > > > > > > > > > > > > > > > Has anyone got this work under SLED11? > > > > > > > > Is your VM configured to expost a virtio-serial device named > > > > com.redhat.spice.0 ? > > > > > > > > -chardev spicevmc,id=charchannel0,name=vdagent > > > > -device > > > > > virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.spice.0 > > > > > > > > > > > > or > > > > > > > > > > > > <controller type='virtio-serial' index='0'/> > > > > <channel type='spicevmc'> > > > > <target type='virtio' name='com.redhat.spice.0'/> > > > > <address type='virtio-serial' controller='0' bus='0' port='1'/> > > > > </channel> > > > > > > > > > > > > > > > > > > > > > > > > > > > -Raj > > > > > > > > > > > > > > > > > > >
