On Thu, Mar 22, 2012 at 06:01:42PM +0800, Jason Wang wrote: > This would be used be following patches. > > Signed-off-by: Jason Wang <jasow...@redhat.com>
Applied, thanks. > --- > hw/e1000_hw.h | 12 ++++++++++++ > 1 files changed, 12 insertions(+), 0 deletions(-) > > diff --git a/hw/e1000_hw.h b/hw/e1000_hw.h > index 9e29af8..c9cb79e 100644 > --- a/hw/e1000_hw.h > +++ b/hw/e1000_hw.h > @@ -349,6 +349,18 @@ > #define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */ > #define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */ > > +/* PHY Control Register */ > +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 > */ > +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ > +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ > +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ > +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ > +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ > +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ > +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 > */ > +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ > +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ > + > /* PHY Status Register */ > #define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register > capabilities */ > #define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
