Hi, On 5/28/26 11:04 AM, Eric Auger wrote: > Hi Igor, > > On 5/27/26 2:49 PM, Igor Mammedov wrote: >> On Tue, 26 May 2026 15:58:08 +0200 >> Eric Auger <[email protected]> wrote: >> >>> Hi Igor, >>> >>> On 3/3/26 10:25 AM, Igor Mammedov wrote: >>>> Allow to use SBSA generic watchdog with virt machine type. >>>> (includes conditional generation of corresponding FDT and >>>> ACPI GTDT descriptors) >>>> >>>> Use '-device sbsa_gwdt' to command line to enable it. >>> I thank that in general Peter is not a big fan of dynamic instantiation >>> of sysbus devices. Don't you have means to instantiate it statically in >>> arm virt memory map? >> >> /me neither >> >> in previous version there was a machine option to enable the feature >> to that was rejected in favor of device. >> >> in this case for platform -device of sysbus based device, I don't think >> we can do better that dynamic sysbus. > > sorry I may have missed some previous discussion details. As far as I > can read, I understand you could instantiate the wdt in a free MMIO > slot, unconfitionnaly just as it is done in hw/arm/sbsa-ref.c. Maybe add > a compat to avoid having it by default on older machine types. Then > about the type of the integration gtdt or wat, can't you have a device > compat? After further reading of the previous version thread, I wonder if you shouldn't always instantiate the watchdog in the machine instead.
Add a device property allowing to switch between GWDT or WDAT version. In arm virt, 1) if you discover the GWDT version is selected (default) you generate both dt and GTDT ACPI table 2) if you discover the WDAT version is selected, you only generate WDAT ACPI description and you output an error in case of DT boot. You may add a machine no_wdt flag to handle compats for older machine types if needed. Would that make sense? Otherwise, can you point me the msgid where the -device was prefered? Thanks Eric > > Thanks > > Eric > >> >> >>> >>> Eric >>>> >>>> Tested with Fedora 43: >>>> FDT: -M virt,acpi=off -device sbsa_gwdt >>>> ACPI: -M virt -device sbsa_gwdt >>>> >>>> Signed-off-by: Igor Mammedov <[email protected]> >>>> --- >>>> hw/arm/Kconfig | 1 + >>>> hw/arm/virt-acpi-build.c | 33 +++++++++++++++++++++++++++++++-- >>>> hw/arm/virt.c | 2 ++ >>>> hw/core/sysbus-fdt.c | 32 ++++++++++++++++++++++++++++++++ >>>> hw/watchdog/sbsa_gwdt.c | 1 + >>>> 5 files changed, 67 insertions(+), 2 deletions(-) >>>> >>>> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig >>>> index c66c452737..1222efadd1 100644 >>>> --- a/hw/arm/Kconfig >>>> +++ b/hw/arm/Kconfig >>>> @@ -36,6 +36,7 @@ config ARM_VIRT >>>> select VIRTIO_MEM_SUPPORTED >>>> select ACPI_CXL >>>> select ACPI_HMAT >>>> + select WDT_SBSA >>>> >>>> config CUBIEBOARD >>>> bool >>>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c >>>> index 719d2f994e..9c14b1d4d5 100644 >>>> --- a/hw/arm/virt-acpi-build.c >>>> +++ b/hw/arm/virt-acpi-build.c >>>> @@ -64,6 +64,7 @@ >>>> #include "hw/virtio/virtio-acpi.h" >>>> #include "target/arm/cpu.h" >>>> #include "target/arm/multiprocessing.h" >>>> +#include "hw/watchdog/sbsa_gwdt.h" >>>> >>>> #define ARM_SPI_BASE 32 >>>> >>>> @@ -863,6 +864,8 @@ build_gtdt(GArray *table_data, BIOSLinker *linker, >>>> VirtMachineState *vms) >>>> const uint32_t irqflags = 0; /* Interrupt is Level triggered */ >>>> AcpiTable table = { .sig = "GTDT", .rev = 3, .oem_id = vms->oem_id, >>>> .oem_table_id = vms->oem_table_id }; >>>> + uint32_t gtdt_start = table_data->len; >>>> + Object *wdt = object_resolve_type_unambiguous(TYPE_WDT_SBSA, NULL); >>>> >>>> acpi_table_begin(&table, table_data); >>>> >>>> @@ -893,10 +896,15 @@ build_gtdt(GArray *table_data, BIOSLinker *linker, >>>> VirtMachineState *vms) >>>> build_append_int_noprefix(table_data, irqflags, 4); >>>> /* CntReadBase Physical address */ >>>> build_append_int_noprefix(table_data, 0xFFFFFFFFFFFFFFFF, 8); >>>> + >>>> /* Platform Timer Count */ >>>> - build_append_int_noprefix(table_data, 0, 4); >>>> + build_append_int_noprefix(table_data, wdt ? 1 : 0, 4); >>>> /* Platform Timer Offset */ >>>> - build_append_int_noprefix(table_data, 0, 4); >>>> + build_append_int_noprefix(table_data, >>>> + wdt ? (table_data->len - gtdt_start) + >>>> + 4 + 4 + 4 /* len of this & following 2 fields to skip */ >>>> + : 0, 4); >>>> + >>>> if (vms->ns_el2_virt_timer_irq) { >>>> /* Virtual EL2 Timer GSIV */ >>>> build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_VIRT_IRQ, >>>> 4); >>>> @@ -906,6 +914,27 @@ build_gtdt(GArray *table_data, BIOSLinker *linker, >>>> VirtMachineState *vms) >>>> build_append_int_noprefix(table_data, 0, 4); >>>> build_append_int_noprefix(table_data, 0, 4); >>>> } >>>> + >>>> + /* ACPI 6.5 spec: 5.2.25.2 ARM Generic Watchdog Structure (Table >>>> 5-124) */ >>>> + if (wdt) { >>>> + PlatformBusDevice *pbus = >>>> PLATFORM_BUS_DEVICE(vms->platform_bus_dev); >>>> + SysBusDevice *sd = SYS_BUS_DEVICE(wdt); >>>> + hwaddr mmio_base = vms->memmap[VIRT_PLATFORM_BUS].base; >>>> + hwaddr rbase = mmio_base + platform_bus_get_mmio_addr(pbus, sd, >>>> 0); >>>> + hwaddr cbase = mmio_base + platform_bus_get_mmio_addr(pbus, sd, >>>> 1); >>>> + int irq = ARM_SPI_BASE + vms->irqmap[VIRT_PLATFORM_BUS] + >>>> + platform_bus_get_irqn(pbus, sd, 0); >>>> + >>>> + build_append_int_noprefix(table_data, 1 /* Type: Watchdog GT */, >>>> 1); >>>> + build_append_int_noprefix(table_data, 28 /* Length */, 2); >>>> + build_append_int_noprefix(table_data, 0, 1); /* Reserved */ >>>> + /* RefreshFrame Physical Address */ >>>> + build_append_int_noprefix(table_data, rbase, 8); >>>> + /* WatchdogControlFrame Physical Address */ >>>> + build_append_int_noprefix(table_data, cbase, 8); >>>> + build_append_int_noprefix(table_data, irq, 4); /* Watchdog Timer >>>> GSIV */ >>>> + build_append_int_noprefix(table_data, 0, 4); /* Watchdog Timer >>>> Flags */ >>>> + } >>>> acpi_table_end(linker, &table); >>>> } >>>> >>>> diff --git a/hw/arm/virt.c b/hw/arm/virt.c >>>> index cab2e21e8a..a87991b591 100644 >>>> --- a/hw/arm/virt.c >>>> +++ b/hw/arm/virt.c >>>> @@ -95,6 +95,7 @@ >>>> #include "hw/cxl/cxl.h" >>>> #include "hw/cxl/cxl_host.h" >>>> #include "qemu/guest-random.h" >>>> +#include "hw/watchdog/sbsa_gwdt.h" >>>> >>>> static GlobalProperty arm_virt_compat_defaults[] = { >>>> { TYPE_VIRTIO_IOMMU_PCI, "aw-bits", "48" }, >>>> @@ -3474,6 +3475,7 @@ static void virt_machine_class_init(ObjectClass *oc, >>>> const void *data) >>>> machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE); >>>> machine_class_allow_dynamic_sysbus_dev(mc, TYPE_UEFI_VARS_SYSBUS); >>>> machine_class_allow_dynamic_sysbus_dev(mc, TYPE_ARM_SMMUV3); >>>> + machine_class_allow_dynamic_sysbus_dev(mc, TYPE_WDT_SBSA); >>>> #ifdef CONFIG_TPM >>>> machine_class_allow_dynamic_sysbus_dev(mc, TYPE_TPM_TIS_SYSBUS); >>>> #endif >>>> diff --git a/hw/core/sysbus-fdt.c b/hw/core/sysbus-fdt.c >>>> index 89d0c46445..76aa1bc579 100644 >>>> --- a/hw/core/sysbus-fdt.c >>>> +++ b/hw/core/sysbus-fdt.c >>>> @@ -36,6 +36,7 @@ >>>> #include "hw/display/ramfb.h" >>>> #include "hw/uefi/var-service-api.h" >>>> #include "hw/arm/fdt.h" >>>> +#include "hw/watchdog/sbsa_gwdt.h" >>>> >>>> /* >>>> * internal struct that contains the information to create dynamic >>>> @@ -118,6 +119,36 @@ static int add_uefi_vars_node(SysBusDevice *sbdev, >>>> void *opaque) >>>> return 0; >>>> } >>>> >>>> +static int add_sbsa_gwdt_node(SysBusDevice *sbdev, void *opaque) >>>> +{ >>>> + PlatformBusFDTData *data = opaque; >>>> + PlatformBusDevice *pbus = data->pbus; >>>> + const char *parent_node = data->pbus_node_name; >>>> + void *fdt = data->fdt; >>>> + uint64_t cbase, rbase; >>>> + char *nodename; >>>> + int irq; >>>> + >>>> + cbase = platform_bus_get_mmio_addr(pbus, sbdev, 1); /* control frame >>>> */ >>>> + rbase = platform_bus_get_mmio_addr(pbus, sbdev, 0); /* refresh frame >>>> */ >>>> + irq = platform_bus_get_irqn(pbus, sbdev, 0); >>>> + >>>> + nodename = g_strdup_printf("%s/watchdog@%" PRIx64, parent_node, >>>> cbase); >>>> + qemu_fdt_add_subnode(fdt, nodename); >>>> + >>>> + qemu_fdt_setprop_string(fdt, nodename, "compatible", "arm,sbsa-gwdt"); >>>> + qemu_fdt_setprop_cells(fdt, nodename, "reg", >>>> + cbase, SBSA_GWDT_CMMIO_SIZE, >>>> + rbase, SBSA_GWDT_RMMIO_SIZE); >>>> + qemu_fdt_setprop_cells(fdt, nodename, "interrupts", >>>> + GIC_FDT_IRQ_TYPE_SPI, data->irq_start + irq, >>>> + GIC_FDT_IRQ_FLAGS_LEVEL_HI); >>>> + qemu_fdt_setprop_cell(fdt, nodename, "timeout-sec", 30); >>>> + >>>> + g_free(nodename); >>>> + return 0; >>>> +} >>>> + >>>> static int no_fdt_node(SysBusDevice *sbdev, void *opaque) >>>> { >>>> return 0; >>>> @@ -140,6 +171,7 @@ static const BindingEntry bindings[] = { >>>> TYPE_BINDING(TYPE_ARM_SMMUV3, no_fdt_node), >>>> TYPE_BINDING(TYPE_RAMFB_DEVICE, no_fdt_node), >>>> TYPE_BINDING(TYPE_UEFI_VARS_SYSBUS, add_uefi_vars_node), >>>> + TYPE_BINDING(TYPE_WDT_SBSA, add_sbsa_gwdt_node), >>>> TYPE_BINDING("", NULL), /* last element */ >>>> }; >>>> >>>> diff --git a/hw/watchdog/sbsa_gwdt.c b/hw/watchdog/sbsa_gwdt.c >>>> index acb970e8b3..c4dd8005b7 100644 >>>> --- a/hw/watchdog/sbsa_gwdt.c >>>> +++ b/hw/watchdog/sbsa_gwdt.c >>>> @@ -285,6 +285,7 @@ static void wdt_sbsa_gwdt_class_init(ObjectClass >>>> *klass, const void *data) >>>> dc->realize = wdt_sbsa_gwdt_realize; >>>> device_class_set_legacy_reset(dc, wdt_sbsa_gwdt_reset); >>>> dc->hotpluggable = false; >>>> + dc->user_creatable = true; >>>> set_bit(DEVICE_CATEGORY_WATCHDOG, dc->categories); >>>> dc->vmsd = &vmstate_sbsa_gwdt; >>>> dc->desc = "SBSA-compliant generic watchdog device"; >>> >> >
