On 7/15/26 05:33, Jamin Lin wrote:
The AST2700 boot tests appended 'cryptomgr.notests=1' to the kernel
command line to skip the Linux crypto manager self-tests.
Now that the HACE crypto engine emulates the crypto command, the
self-tests pass, so drop the workaround and let them run. This also
exercises the HACE crypto emulation during the functional boot tests.
Signed-off-by: Jamin Lin <[email protected]>
---
tests/functional/aarch64/test_aspeed_ast2700a1.py | 5 -----
tests/functional/aarch64/test_aspeed_ast2700a2.py | 5 -----
tests/functional/aarch64/test_aspeed_ast2700fc.py | 5 -----
3 files changed, 15 deletions(-)
diff --git a/tests/functional/aarch64/test_aspeed_ast2700a1.py
b/tests/functional/aarch64/test_aspeed_ast2700a1.py
index b0c08854da..bc535449b5 100755
--- a/tests/functional/aarch64/test_aspeed_ast2700a1.py
+++ b/tests/functional/aarch64/test_aspeed_ast2700a1.py
@@ -51,10 +51,6 @@ def verify_vbootrom_firmware_flow(self):
wait_for_console_pattern(self, 'pass')
wait_for_console_pattern(self, 'Jumping to BL31 (Trusted Firmware-A)')
- def disable_kernel_crypto_selftest(self):
- exec_command_and_wait_for_pattern(self,
- 'setenv bootargs "${bootargs} cryptomgr.notests=1"', '=>')
-
def enable_ast2700_pcie2(self):
exec_command_and_wait_for_pattern(self,
'cp 100420000 403000000 900000', '=>')
@@ -71,7 +67,6 @@ def verify_openbmc_boot_start(self, enable_pcie=True):
wait_for_console_pattern(self, 'U-Boot 2023.10')
wait_for_console_pattern(self, 'Hit any key to stop autoboot')
exec_command_and_wait_for_pattern(self, '\012', '=>')
- self.disable_kernel_crypto_selftest()
if enable_pcie:
self.enable_ast2700_pcie2()
else:
diff --git a/tests/functional/aarch64/test_aspeed_ast2700a2.py
b/tests/functional/aarch64/test_aspeed_ast2700a2.py
index ed414999f4..5aea0a9dd0 100755
--- a/tests/functional/aarch64/test_aspeed_ast2700a2.py
+++ b/tests/functional/aarch64/test_aspeed_ast2700a2.py
@@ -51,10 +51,6 @@ def verify_vbootrom_firmware_flow(self):
wait_for_console_pattern(self, 'pass')
wait_for_console_pattern(self, 'Jumping to BL31 (Trusted Firmware-A)')
- def disable_kernel_crypto_selftest(self):
- exec_command_and_wait_for_pattern(self,
- 'setenv bootargs "${bootargs} cryptomgr.notests=1"', '=>')
-
def enable_ast2700_pcie2(self):
exec_command_and_wait_for_pattern(self,
'cp 100420000 403000000 900000', '=>')
@@ -71,7 +67,6 @@ def verify_openbmc_boot_start(self, enable_pcie=True):
wait_for_console_pattern(self, 'U-Boot 2023.10')
wait_for_console_pattern(self, 'Hit any key to stop autoboot')
exec_command_and_wait_for_pattern(self, '\012', '=>')
- self.disable_kernel_crypto_selftest()
if enable_pcie:
self.enable_ast2700_pcie2()
else:
diff --git a/tests/functional/aarch64/test_aspeed_ast2700fc.py
b/tests/functional/aarch64/test_aspeed_ast2700fc.py
index df889134ed..1648fa9dba 100755
--- a/tests/functional/aarch64/test_aspeed_ast2700fc.py
+++ b/tests/functional/aarch64/test_aspeed_ast2700fc.py
@@ -27,10 +27,6 @@ def do_test_aarch64_aspeed_sdk_start(self, image):
self.vm.launch()
- def disable_kernel_crypto_selftest(self):
- exec_command_and_wait_for_pattern(self,
- 'setenv bootargs "${bootargs} cryptomgr.notests=1"', '=>')
-
def enable_ast2700_pcie2(self):
exec_command_and_wait_for_pattern(self,
'cp 100420000 403000000 900000', '=>')
@@ -47,7 +43,6 @@ def verify_openbmc_boot_and_login(self, name):
wait_for_console_pattern(self, 'U-Boot 2023.10')
wait_for_console_pattern(self, 'Hit any key to stop autoboot')
exec_command_and_wait_for_pattern(self, '\012', '=>')
- self.disable_kernel_crypto_selftest()
self.enable_ast2700_pcie2()
wait_for_console_pattern(self, 'Starting kernel ...')
There are still crypto tests errors. See below. Is it expected ?
Thanks,
C.
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd040]
[ 0.000000] Linux version 6.18.3-v00.08.01-g172b7e27a30d (oe-user@oe-host)
(aarch64-openbmc-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429)
#1 SMP PREEMPT Wed Feb 18 09:06:34 CST 2026
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: AST2700 EVB
[ 0.000000] Malformed early option 'earlycon'
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000047ff00000,
size 1 MiB
[ 0.000000] OF: reserved mem: initialized node xdma0, compatible id
shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000047ff00000..0x000000047fffffff (1024
KiB) nomap non-reusable xdma0
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000047fe00000,
size 1 MiB
[ 0.000000] OF: reserved mem: initialized node xdma1, compatible id
shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000047fe00000..0x000000047fefffff (1024
KiB) nomap non-reusable xdma1
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000047de00000,
size 32 MiB
[ 0.000000] OF: reserved mem: initialized node video0, compatible id
shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000047de00000..0x000000047fdfffff (32768
KiB) map reusable video0
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000047ac00000,
size 32 MiB
[ 0.000000] OF: reserved mem: initialized node video1, compatible id
shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000047ac00000..0x000000047cbfffff (32768
KiB) map reusable video1
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000047ce00000,
size 16 MiB
[ 0.000000] OF: reserved mem: initialized node mcyc0, compatible id
shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000047ce00000..0x000000047ddfffff (16384
KiB) map reusable mcyc0
[ 0.000000] OF: reserved mem: 0x0000000430000000..0x000000043007ffff (512
KiB) nomap non-reusable trusted-firmware-a@430000000
[ 0.000000] OF: reserved mem: 0x0000000430080000..0x000000043107ffff (16384
KiB) nomap non-reusable optee-core@430080000
[ 0.000000] OF: reserved mem: 0x0000000428000000..0x000000042bffffff (65536
KiB) nomap non-reusable eadf0-memory@428000000
[ 0.000000] OF: reserved mem: 0x0000000424000000..0x0000000427ffffff (65536
KiB) nomap non-reusable espi0-mmbi-memory@424000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000423800000,
size 1 MiB
[ 0.000000] OF: reserved mem: initialized node bmc-dev0-memory@423800000,
compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000423800000..0x00000004238fffff (1024
KiB) nomap non-reusable bmc-dev0-memory@423800000
[ 0.000000] OF: reserved mem: 0x0000000423a00000..0x0000000423bfffff (2048
KiB) nomap non-reusable pcie0-mmbi0-memory@423a00000
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000423900000,
size 1 MiB
[ 0.000000] OF: reserved mem: initialized node bmc-dev1-memory@423900000,
compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000423900000..0x00000004239fffff (1024
KiB) nomap non-reusable bmc-dev1-memory@423900000
[ 0.000000] OF: reserved mem: 0x0000000423c00000..0x0000000423dfffff (2048
KiB) nomap non-reusable pcie1-mmbi4-memory@423c00000
[ 0.000000] OF: reserved mem: 0x0000000423e00000..0x0000000423ffffff (2048
KiB) nomap non-reusable pcie2-mmbi0-memory@423e00000
[ 0.000000] OF: reserved mem: 0x000000042c000000..0x000000042dffffff (32768
KiB) nomap non-reusable ssp-memory@42c000000
[ 0.000000] OF: reserved mem: 0x000000042e000000..0x000000042fffffff (32768
KiB) nomap non-reusable tsp-memory@42e000000
[ 0.000000] OF: reserved mem: 0x0000000431080000..0x000000043187ffff (8192
KiB) nomap non-reusable ipc-ssp-share@431080000
[ 0.000000] OF: reserved mem: 0x0000000431880000..0x0000000431b2ffff (2752
KiB) nomap non-reusable ipc-bootmcu-share@431880000
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000431b30000,
size 0 MiB
[ 0.000000] OF: reserved mem: initialized node uhci0-reserved@431b30000,
compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000431b30000..0x0000000431b6ffff (256
KiB) nomap non-reusable uhci0-reserved@431b30000
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000431b70000,
size 0 MiB
[ 0.000000] OF: reserved mem: initialized node uhci1-reserved@431b70000,
compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000431b70000..0x0000000431baffff (256
KiB) nomap non-reusable uhci1-reserved@431b70000
[ 0.000000] OF: reserved mem: 0x0000000431bb0000..0x0000000431bbffff (64
KiB) nomap non-reusable vbios-base0@431bb0000
[ 0.000000] OF: reserved mem: 0x0000000431bc0000..0x0000000431bcffff (64
KiB) nomap non-reusable vbios-base1@431bc0000
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000431bd0000,
size 0 MiB
[ 0.000000] OF: reserved mem: initialized node mctp0-reserved@431bd0000,
compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000431bd0000..0x0000000431bdffff (64
KiB) nomap non-reusable mctp0-reserved@431bd0000
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000431be0000,
size 0 MiB
[ 0.000000] OF: reserved mem: initialized node mctp1-reserved@431be0000,
compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000431be0000..0x0000000431beffff (64
KiB) nomap non-reusable mctp1-reserved@431be0000
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000431bf0000,
size 0 MiB
[ 0.000000] OF: reserved mem: initialized node mctp2-reserved@431bf0000,
compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000431bf0000..0x0000000431bfffff (64
KiB) nomap non-reusable mctp2-reserved@431bf0000
[ 0.000000] NUMA: Faking a node at [mem
0x0000000400000000-0x000000047fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x47a892d40-0x47a89533f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000400000000-0x000000047fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000400000000-0x00000004237fffff]
[ 0.000000] node 0: [mem 0x0000000423800000-0x0000000431bfffff]
[ 0.000000] node 0: [mem 0x0000000431c00000-0x000000047fdfffff]
[ 0.000000] node 0: [mem 0x000000047fe00000-0x000000047fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000400000000-0x000000047fffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x0000000401800000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.5
[ 0.000000] percpu: Embedded 31 pages/cpu s88216 r8192 d30568 u126976
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GICv3 CPU interface
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyS12,115200n8 root=/dev/ram rw
earlycon
[ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824
bytes
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152
bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,
linear)
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 2MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem
0x0000000478300000-0x0000000478500000] (2MB)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524288
[ 0.000000] Policy zone: DMA
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25
jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1
rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1
rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=1
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000012280000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 1600.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff
max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 0.000037] sched_clock: 61 bits at 1600MHz, resolution 0ns, wraps every
4398046511103ns
[ 0.006379] Console: colour dummy device 80x25
[ 0.008502] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3200.00 BogoMIPS (lpj=6400000)
[ 0.008572] pid_max: default: 32768 minimum: 301
[ 0.010747] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes,
linear)
[ 0.010795] Mountpoint-cache hash table entries: 4096 (order: 3, 32768
bytes, linear)
[ 0.037047] rcu: Hierarchical SRCU implementation.
[ 0.037077] rcu: Max phase no-delay instances is 1000.
[ 0.038351] Timer migration: 1 hierarchy levels; 8 children per group; 1
crossnode level
[ 0.041363] ASPEED AST2700 rev A2 (06020103)
[ 0.042677] smp: Bringing up secondary CPUs ...
[ 0.045789] Detected VIPT I-cache on CPU1
[ 0.046337] GICv3: CPU1: found redistributor 1 region 0:0x00000000122a0000
[ 0.046467] CPU1: Booted secondary processor 0x0000000001 [0x411fd040]
[ 0.050519] Detected VIPT I-cache on CPU2
[ 0.050686] GICv3: CPU2: found redistributor 2 region 0:0x00000000122c0000
[ 0.050765] CPU2: Booted secondary processor 0x0000000002 [0x411fd040]
[ 0.052102] Detected VIPT I-cache on CPU3
[ 0.052264] GICv3: CPU3: found redistributor 3 region 0:0x00000000122e0000
[ 0.052345] CPU3: Booted secondary processor 0x0000000003 [0x411fd040]
[ 0.052712] smp: Brought up 1 node, 4 CPUs
[ 0.052729] SMP: Total of 4 processors activated.
[ 0.052743] CPU: All CPU(s) started at EL2
[ 0.052780] CPU features: detected: 32-bit EL0 Support
[ 0.052821] CPU features: detected: CRC32 instructions
[ 0.052910] CPU features: detected: PMUv3
[ 0.059753] alternatives: applying system-wide alternatives
[ 0.070608] Memory: 1673568K/2097152K available (14592K kernel code, 2014K
rwdata, 5568K rodata, 1408K init, 524K bss, 303892K reserved, 114688K
cma-reserved)
[ 0.088349] devtmpfs: initialized
[ 0.110897] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.111263] posixtimers hash table entries: 2048 (order: 3, 32768 bytes,
linear)
[ 0.111895] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes,
total 64 KiB, linear).
[ 0.113861] 26688 pages in range for non-PLT usage
[ 0.114239] 518208 pages in range for PLT usage
[ 0.115151] pinctrl core: initialized pinctrl subsystem
[ 0.135658] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.144194] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.144873] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic
allocations
[ 0.145400] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic
allocations
[ 0.145718] audit: initializing netlink subsys (disabled)
[ 0.147488] audit: type=2000 audit(0.140:1): state=initialized
audit_enabled=0 res=1
[ 0.149211] cpuidle: using governor menu
[ 0.149955] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.150560] ASID allocator initialised with 65536 entries
[ 0.216875] iommu: Default domain type: Translated
[ 0.216907] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.220788] SCSI subsystem initialized
[ 0.221600] usbcore: registered new interface driver usbfs
[ 0.221813] usbcore: registered new interface driver hub
[ 0.221908] usbcore: registered new device driver usb
[ 0.222221] mc: Linux media interface: v0.10
[ 0.222262] videodev: Linux video capture interface: v2.00
[ 0.222358] pps_core: LinuxPPS API ver. 1 registered
[ 0.222364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<[email protected]>
[ 0.222392] PTP clock support registered
[ 0.222497] EDAC MC: Ver: 3.0.0
[ 0.223354] scmi_core: SCMI protocol bus registered
[ 0.231561] mctp: management component transport protocol core
[ 0.231573] NET: Registered PF_MCTP protocol family
[ 0.232784] vgaarb: loaded
[ 0.235288] clocksource: Switched to clocksource arch_sys_counter
[ 0.237125] VFS: Disk quotas dquot_6.6.0
[ 0.237189] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.252368] NET: Registered PF_INET protocol family
[ 0.253271] IP idents hash table entries: 32768 (order: 6, 262144 bytes,
linear)
[ 0.256584] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2,
16384 bytes, linear)
[ 0.256622] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,
linear)
[ 0.256661] TCP established hash table entries: 16384 (order: 5, 131072
bytes, linear)
[ 0.257174] TCP bind hash table entries: 16384 (order: 7, 524288 bytes,
linear)
[ 0.257342] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.258127] UDP hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.258261] UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.258919] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.259388] PCI: CLS 0 bytes, default 64
[ 0.262222] Trying to unpack rootfs image as initramfs...
[ 0.262737] Initialise system trusted keyrings
[ 0.263942] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[ 0.266013] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.266194] jffs2: version 2.2. (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.296367] NET: Registered PF_ALG protocol family
[ 0.296561] Key type asymmetric registered
[ 0.296676] Asymmetric key parser 'x509' registered
[ 0.297006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
243)
[ 0.297097] io scheduler mq-deadline registered
[ 0.297134] io scheduler kyber registered
[ 0.297360] io scheduler bfq registered
[ 0.310863] aspeed_usb_phy3 12010000.usb-phy3: Probed USB PHY3
[ 0.311709] aspeed_usb_phy3 12020000.usb-phy3: Probed USB PHY3
[ 0.323247] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.324971] ipmi-bt-host 12c19140.pcie-ibt: initialised channel 2 at IO
address 0xe4
[ 0.325436] ipmi-bt-host 12c19940.pcie-ibt: initialised channel 3 at IO
address 0xe4
[ 0.326029] ipmi-bt-host 14c31140.ibt: initialised channel 0 at IO address
0xe4
[ 0.326393] ipmi-bt-host 14c32140.ibt: initialised channel 1 at IO address
0xe4
[ 0.327619] aspeed-kcs-bmc 12c19024.pcie-kcs: Initialised IPMI client for
channel 8
[ 0.327656] aspeed-kcs-bmc 12c19024.pcie-kcs: Initialised channel 8 at IO
address 0x3a0
[ 0.328103] aspeed-kcs-bmc 12c19028.pcie-kcs: Initialised IPMI client for
channel 9
[ 0.328112] aspeed-kcs-bmc 12c19028.pcie-kcs: Initialised channel 9 at IO
address 0x3a8
[ 0.328481] aspeed-kcs-bmc 12c1902c.pcie-kcs: Initialised IPMI client for
channel 10
[ 0.328490] aspeed-kcs-bmc 12c1902c.pcie-kcs: Initialised channel 10 at IO
address 0x3a2
[ 0.328832] aspeed-kcs-bmc 12c19114.pcie-kcs: Initialised IPMI client for
channel 11
[ 0.328841] aspeed-kcs-bmc 12c19114.pcie-kcs: Initialised channel 11 at IO
address 0x3a4
[ 0.329240] aspeed-kcs-bmc 12c19824.pcie-kcs: Initialised IPMI client for
channel 12
[ 0.329248] aspeed-kcs-bmc 12c19824.pcie-kcs: Initialised channel 12 at IO
address 0x3a0
[ 0.329852] aspeed-kcs-bmc 12c19828.pcie-kcs: Initialised IPMI client for
channel 13
[ 0.329860] aspeed-kcs-bmc 12c19828.pcie-kcs: Initialised channel 13 at IO
address 0x3a8
[ 0.330154] aspeed-kcs-bmc 12c1982c.pcie-kcs: Initialised IPMI client for
channel 14
[ 0.330162] aspeed-kcs-bmc 12c1982c.pcie-kcs: Initialised channel 14 at IO
address 0x3a2
[ 0.330497] aspeed-kcs-bmc 12c19914.pcie-kcs: Initialised IPMI client for
channel 15
[ 0.330506] aspeed-kcs-bmc 12c19914.pcie-kcs: Initialised channel 15 at IO
address 0x3a4
[ 0.331245] aspeed-kcs-bmc 14c31024.lpc-kcs: Initialised IPMI client for
channel 0
[ 0.331256] aspeed-kcs-bmc 14c31024.lpc-kcs: Initialised channel 0 at IO
address 0xca0
[ 0.331599] aspeed-kcs-bmc 14c31028.lpc-kcs: Initialised IPMI client for
channel 1
[ 0.331608] aspeed-kcs-bmc 14c31028.lpc-kcs: Initialised channel 1 at IO
address 0xca8
[ 0.332047] aspeed-kcs-bmc 14c3102c.lpc-kcs: Initialised IPMI client for
channel 2
[ 0.332058] aspeed-kcs-bmc 14c3102c.lpc-kcs: Initialised channel 2 at IO
address 0xca2
[ 0.332393] aspeed-kcs-bmc 14c31114.lpc-kcs: Initialised IPMI client for
channel 3
[ 0.332402] aspeed-kcs-bmc 14c31114.lpc-kcs: Initialised channel 3 at IO
address 0xca4
[ 0.332793] aspeed-kcs-bmc 14c32024.kcs: Initialised IPMI client for channel
4
[ 0.332801] aspeed-kcs-bmc 14c32024.kcs: Initialised channel 4 at IO address
0xca0
[ 0.333107] aspeed-kcs-bmc 14c32028.kcs: Initialised IPMI client for channel
5
[ 0.333115] aspeed-kcs-bmc 14c32028.kcs: Initialised channel 5 at IO address
0xca8
[ 0.333408] aspeed-kcs-bmc 14c3202c.kcs: Initialised IPMI client for channel
6
[ 0.333425] aspeed-kcs-bmc 14c3202c.kcs: Initialised channel 6 at IO address
0xca2
[ 0.333731] aspeed-kcs-bmc 14c32114.kcs: Initialised IPMI client for channel
7
[ 0.333739] aspeed-kcs-bmc 14c32114.kcs: Initialised channel 7 at IO address
0xca4
[ 0.335242] aspeed_bmc_dev 12110000.bmc-dev: reserved memory is beyond
device's set DMA address range
[ 0.335287] aspeed_bmc_dev 12110000.bmc-dev: assigned reserved memory node
bmc-dev0-memory@423800000
[ 0.336909] aspeed_bmc_dev 12110000.bmc-dev: aspeed bmc device: driver
successfully loaded.
[ 0.337060] aspeed_bmc_dev 12120000.bmc-dev: reserved memory is beyond
device's set DMA address range
[ 0.337068] aspeed_bmc_dev 12120000.bmc-dev: assigned reserved memory node
bmc-dev1-memory@423900000
[ 0.337826] aspeed_bmc_dev 12120000.bmc-dev: aspeed bmc device: driver
successfully loaded.
[ 0.343471] aspeed-uart-routing 14c31098.uart-routing: module loaded
[ 0.343602] aspeed-uart-routing 14c32098.uart-routing: module loaded
[ 0.344331] aspeed-xdma 12c04000.xdma: reserved memory is beyond device's
set DMA address range
[ 0.344341] aspeed-xdma 12c04000.xdma: assigned reserved memory node xdma0
[ 0.346934] aspeed-xdma 12c05000.xdma: reserved memory is beyond device's
set DMA address range
[ 0.346945] aspeed-xdma 12c05000.xdma: assigned reserved memory node xdma1
[ 0.389006] aspeed_usb_phy3 12010000.usb-phy3: Wait phy3 init timed out
[ 0.389059] phy phy-12010000.usb-phy3.3: phy init failed --> -110
[ 0.389134] aspeed_usb_hp soc@10000000:usb3ahp: failed to init usb3 phy
[ 0.389309] aspeed_usb_hp soc@10000000:usb3ahp: probe with driver
aspeed_usb_hp failed with error -110
[ 0.402300] aspeed_usb_phy3 12020000.usb-phy3: Wait phy3 init timed out
[ 0.402312] phy phy-12020000.usb-phy3.4: phy init failed --> -110
[ 0.402319] aspeed_usb_hp soc@10000000:usb3bhp: failed to init usb3 phy
[ 0.402325] aspeed_usb_hp soc@10000000:usb3bhp: probe with driver
aspeed_usb_hp failed with error -110
[ 0.405370] aspeed_pcie_mmbi 12c21000.e2m-config:pcie0-mmbi@0: ASPEED PCIe
MMBI Dev 0: driver successfully loaded.
[ 0.406781] aspeed_pcie_mmbi 12c22000.e2m-config:pcie1-mmbi@4: ASPEED PCIe
MMBI Dev 1: driver successfully loaded.
[ 0.408663] aspeed-mctp 12c06000.mctp0: assigned reserved memory node
mctp0-reserved@431bd0000
[ 0.412243] aspeed-mctp 12c07000.mctp1: assigned reserved memory node
mctp1-reserved@431be0000
[ 0.413541] aspeed-mctp 14c1a000.mctp2: assigned reserved memory node
mctp2-reserved@431bf0000
[ 0.415109] ast2700_otp 14c07000.otp: Aspeed OTP driver successfully
registered
[ 0.458099] Freeing initrd memory: 1312K
[ 0.489832] aspeed-espi 14c05000.espi: assigned reserved memory node mcyc0
[ 0.495645] aspeed-espi 14c05000.espi: eDAF mode: 0x2
[ 0.496444] aspeed-espi 14c05000.espi: module loaded
[ 0.497026] ast2700-rtc-over-espi 14c3d000.rtc-over_espi: RTC not ready,
deferring probe
[ 0.548836] Serial: 8250/16550 driver, 23 ports, IRQ sharing enabled
[ 0.561470] 12c18000.serial: ttyS19 at MMIO 0x12c18000 (irq = 78, base_baud
= 25000000) is a ASPEED VUART
[ 0.563500] 12c18100.serial: ttyS20 at MMIO 0x12c18100 (irq = 79, base_baud
= 25000000) is a ASPEED VUART
[ 0.564507] 12c18200.serial: ttyS21 at MMIO 0x12c18200 (irq = 80, base_baud
= 25000000) is a ASPEED VUART
[ 0.565501] 12c18300.serial: ttyS22 at MMIO 0x12c18300 (irq = 81, base_baud
= 25000000) is a ASPEED VUART
[ 0.566848] 14c33200.serial: ttyS2 at MMIO 0x14c33200 (irq = 82, base_baud =
115384) is a 16550A
[ 0.568986] 14c33800.serial: ttyS9 at MMIO 0x14c33800 (irq = 83, base_baud =
115384) is a 16550A
[ 0.570059] 14c33b00.serial: ttyS12 at MMIO 0x14c33b00 (irq = 84, base_baud
= 115384) is a 16550A
[ 0.571430] printk: legacy console [ttyS12] enabled
[ 0.599367] DWC_TRNG_DriverSDK_1.00a
[ 0.599866] NIST_TRNG: Hardware rel_num=0x0, ext_ver=0x0, ext_enum=0x0
[ 1.081562] wait_on_: failed timeout: 00000000
[ 1.081679] NIST_TRNG init failed (-21)
[ 1.081882] nist_trng nist_trng: probe with driver nist_trng failed with
error -21
[ 1.100031] brd: module loaded
[ 1.108016] loop: module loaded
[ 1.137960] spi-aspeed-smc 14000000.spi: user mode and normal read are used
[ 1.141534] spi-nor spi0.0: supply vcc not found, using dummy regulator
[ 1.162328] spi-aspeed-smc 14000000.spi: CE0 read buswidth: 4 [0x406c0641]
[ 1.162556] spi-aspeed-smc 14000000.spi: CE0 write buswidth: 4 [0x40340602]
[ 1.215999] 5 fixed-partitions partitions found on MTD device bmc
[ 1.216161] Creating 5 MTD partitions on "bmc":
[ 1.216316] 0x000000000000-0x000000400000 : "u-boot"
[ 1.218264] 0x000000400000-0x000000420000 : "u-boot-env"
[ 1.219554] 0x000000420000-0x000000d20000 : "kernel"
[ 1.220982] 0x000000d20000-0x000006000000 : "rofs"
[ 1.222261] 0x000006000000-0x000008000000 : "rwfs"
[ 1.227788] spi-nor spi0.1: supply vcc not found, using dummy regulator
[ 1.228829] spi-aspeed-smc 14000000.spi: Calibration area too uniform
[ 1.229072] spi-aspeed-smc 14000000.spi: CE1 read buswidth: 4 [0x406c0641]
[ 1.229186] spi-aspeed-smc 14000000.spi: CE1 write buswidth: 4 [0x40340602]
[ 1.247107] spi-aspeed-smc 14010000.spi: user mode and normal read are used
[ 1.248480] spi-nor spi1.0: supply vcc not found, using dummy regulator
[ 1.249664] spi-aspeed-smc 14010000.spi: Calibration area too uniform
[ 1.249758] spi-aspeed-smc 14010000.spi: CE0 read buswidth: 2 [0x203c0641]
[ 1.249851] spi-aspeed-smc 14010000.spi: CE0 write buswidth: 1 [0x00120602]
[ 1.259585] spi-aspeed-smc 14020000.spi: user mode and normal read are used
[ 1.260535] spi-nor spi2.0: supply vcc not found, using dummy regulator
[ 1.260863] spi-nor spi2.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
[ 1.264807] spi_aspeed_txrx 14030000.spi: cs: 0, ctrl_val: 0x00000407
[ 1.279202] CAN device driver interface
[ 2.288754] aspeed_can 14c3e000.can (unnamed net_device) (uninitialized):
timed out for config mode
[ 2.289000] aspeed_can 14c3e000.can: probe with driver aspeed_can failed
with error -110
[ 2.291357] ftgmac100 14050000.ethernet: Read MAC address 52:54:00:12:34:56
from chip
[ 2.292825] RTL8211E Gigabit Ethernet 14040000.mdio-1:00: attached PHY
driver (mii_bus:phy_addr=14040000.mdio-1:00, irq=POLL)
[ 2.312021] ftgmac100 14050000.ethernet eth0: irq 86, mapped at
(____ptrval____)
[ 2.312736] ftgmac100 14060000.ethernet: Read MAC address 52:54:00:12:34:57
from chip
[ 2.312994] RTL8211E Gigabit Ethernet 14040008.mdio-1:00: attached PHY
driver (mii_bus:phy_addr=14040008.mdio-1:00, irq=POLL)
[ 2.331522] ftgmac100 14060000.ethernet eth1: irq 87, mapped at
(____ptrval____)
[ 2.331821] e100: Intel(R) PRO/100 Network Driver
[ 2.331879] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.332018] e1000: Intel(R) PRO/1000 Network Driver
[ 2.332088] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.332213] e1000e: Intel(R) PRO/1000 Network Driver
[ 2.332303] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.332431] igb: Intel(R) Gigabit Ethernet Network Driver
[ 2.332511] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.332639] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
[ 2.332726] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 2.333468] MCTP I2C interface driver
[ 2.333816] usbcore: registered new interface driver mctp-usb
[ 2.333952] usbcore: registered new interface driver cdc_ether
[ 2.334071] usbcore: registered new interface driver cdc_eem
[ 2.334194] usbcore: registered new interface driver net1080
[ 2.334317] usbcore: registered new interface driver cdc_subset
[ 2.334434] usbcore: registered new interface driver zaurus
[ 2.334550] usbcore: registered new interface driver cdc_ncm
[ 2.334670] usbcore: registered new interface driver r8153_ecm
[ 2.336620] platform-uhci 14110000.usb: Detected 2 ports from device-tree
[ 2.336765] platform-uhci 14110000.usb: Enabled Aspeed implementation
workarounds
[ 2.337202] platform-uhci 14110000.usb: Generic UHCI Host Controller
[ 2.337204] ehci-platform 14123000.usb: EHCI Host Controller
[ 2.337639] ehci-platform 14123000.usb: new USB bus registered, assigned bus
number 2
[ 2.337640] platform-uhci 14110000.usb: new USB bus registered, assigned bus
number 1
[ 2.338409] platform-uhci 14110000.usb: irq 89, io mem 0x14110000
[ 2.338627] platform-uhci 14110000.usb: Device does not have specific DMA
pool
[ 2.339110] ehci-platform 14123000.usb: irq 88, io mem 0x14123000
[ 2.344125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 6.18
[ 2.344272] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.344375] usb usb1: Product: Generic UHCI Host Controller
[ 2.344456] usb usb1: Manufacturer: Linux 6.18.3-v00.08.01-g172b7e27a30d
uhci_hcd
[ 2.344560] usb usb1: SerialNumber: 14110000.usb
[ 2.347100] hub 1-0:1.0: USB hub found
[ 2.347598] hub 1-0:1.0: 2 ports detected
[ 2.351199] ehci-platform 14123000.usb: USB 2.0 started, EHCI 1.00
[ 2.351206] usbcore: registered new interface driver cdc_acm
[ 2.351251] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
[ 2.351648] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.18
[ 2.351794] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.351918] usb usb2: Product: EHCI Host Controller
[ 2.351999] usb usb2: Manufacturer: Linux 6.18.3-v00.08.01-g172b7e27a30d
ehci_hcd
[ 2.352005] usbcore: registered new interface driver uas
[ 2.352094] usb usb2: SerialNumber: 14123000.usb
[ 2.352418] usbcore: registered new interface driver usb-storage
[ 2.352828] usbcore: registered new interface driver pl2303
[ 2.352891] hub 2-0:1.0: USB hub found
[ 2.353110] usbserial: USB Serial support registered for pl2303
[ 2.353190] hub 2-0:1.0: 6 ports detected
[ 2.363145] platform-uhci 14110000.usb: Controller not stopped yet!
[ 2.366436] aspeed_vhub 12060000.usb-vhub: PCIe EHCI to vhub
[ 2.368834] aspeed_vhub 12060000.usb-vhub: Initialized virtual hub in USB2
mode
[ 2.379205] aspeed_vhub 12062000.usb-vhub: PCIe EHCI to vhub
[ 2.380707] aspeed_vhub 12062000.usb-vhub: Initialized virtual hub in USB2
mode
[ 2.392449] aspeed_vhub 14120000.usb-vhub: Initialized virtual hub in USB2
mode
[ 2.396382] aspeed-rtc 12c0f000.rtc: registered as rtc0
[ 2.396904] aspeed-rtc 12c0f000.rtc: setting system clock to
1970-01-01T01:01:01 UTC (3661)
[ 2.397557] i2c_dev: i2c /dev entries driver
[ 2.401063] i2c_ast2600 14c0f100.i2c-bus: i2c-bus [0]: adapter [100 KHz]
mode [2] version [1]
[ 2.401971] i2c_ast2600 14c0f200.i2c-bus: i2c-bus [1]: adapter [100 KHz]
mode [2] version [1]
[ 2.402763] i2c_ast2600 14c0f300.i2c-bus: i2c-bus [2]: adapter [100 KHz]
mode [2] version [1]
[ 2.403689] i2c_ast2600 14c0f400.i2c-bus: i2c-bus [3]: adapter [100 KHz]
mode [2] version [1]
[ 2.404448] i2c_ast2600 14c0f500.i2c-bus: i2c-bus [4]: adapter [100 KHz]
mode [2] version [1]
[ 2.405292] i2c_ast2600 14c0f600.i2c-bus: i2c-bus [5]: adapter [100 KHz]
mode [2] version [1]
[ 2.406064] i2c_ast2600 14c0f700.i2c-bus: i2c-bus [6]: adapter [100 KHz]
mode [2] version [1]
[ 2.406787] i2c_ast2600 14c0f800.i2c-bus: i2c-bus [7]: adapter [100 KHz]
mode [2] version [1]
[ 2.407562] i2c_ast2600 14c0f900.i2c-bus: i2c-bus [8]: adapter [100 KHz]
mode [2] version [1]
[ 2.408366] i2c_ast2600 14c0fc00.i2c-bus: i2c-bus [11]: adapter [100 KHz]
mode [2] version [1]
[ 2.409112] i2c_ast2600 14c0fd00.i2c-bus: i2c-bus [12]: adapter [100 KHz]
mode [2] version [1]
[ 2.409807] i2c_ast2600 14c0fe00.i2c-bus: i2c-bus [13]: adapter [100 KHz]
mode [2] version [1]
[ 2.410928] 14c20000.i3c0: MIPI I3C HCI v0.0 r00
[ 2.411100] 14c20000.i3c0: unsupported HCI version
[ 2.411231] mipi-i3c-hci 14c20000.i3c0: probe with driver mipi-i3c-hci
failed with error -93
[ 2.411493] 14c21000.i3c1: MIPI I3C HCI v0.0 r00
[ 2.411571] 14c21000.i3c1: unsupported HCI version
[ 2.411636] mipi-i3c-hci 14c21000.i3c1: probe with driver mipi-i3c-hci
failed with error -93
[ 2.411863] 14c22000.i3c2: MIPI I3C HCI v0.0 r00
[ 2.411934] 14c22000.i3c2: unsupported HCI version
[ 2.411999] mipi-i3c-hci 14c22000.i3c2: probe with driver mipi-i3c-hci
failed with error -93
[ 2.412217] 14c23000.i3c3: MIPI I3C HCI v0.0 r00
[ 2.412290] 14c23000.i3c3: unsupported HCI version
[ 2.412355] mipi-i3c-hci 14c23000.i3c3: probe with driver mipi-i3c-hci
failed with error -93
[ 2.412574] 14c24000.i3c4: MIPI I3C HCI v0.0 r00
[ 2.412644] 14c24000.i3c4: unsupported HCI version
[ 2.412710] mipi-i3c-hci 14c24000.i3c4: probe with driver mipi-i3c-hci
failed with error -93
[ 2.412927] 14c25000.i3c5: MIPI I3C HCI v0.0 r00
[ 2.412997] 14c25000.i3c5: unsupported HCI version
[ 2.413062] mipi-i3c-hci 14c25000.i3c5: probe with driver mipi-i3c-hci
failed with error -93
[ 2.413280] 14c26000.i3c6: MIPI I3C HCI v0.0 r00
[ 2.413350] 14c26000.i3c6: unsupported HCI version
[ 2.413414] mipi-i3c-hci 14c26000.i3c6: probe with driver mipi-i3c-hci
failed with error -93
[ 2.413659] 14c27000.i3c7: MIPI I3C HCI v0.0 r00
[ 2.413734] 14c27000.i3c7: unsupported HCI version
[ 2.413798] mipi-i3c-hci 14c27000.i3c7: probe with driver mipi-i3c-hci
failed with error -93
[ 2.414017] 14c28000.i3c8: MIPI I3C HCI v0.0 r00
[ 2.414087] 14c28000.i3c8: unsupported HCI version
[ 2.414153] mipi-i3c-hci 14c28000.i3c8: probe with driver mipi-i3c-hci
failed with error -93
[ 2.414371] 14c29000.i3c9: MIPI I3C HCI v0.0 r00
[ 2.414442] 14c29000.i3c9: unsupported HCI version
[ 2.414506] mipi-i3c-hci 14c29000.i3c9: probe with driver mipi-i3c-hci
failed with error -93
[ 2.414742] 14c2a000.i3c10: MIPI I3C HCI v0.0 r00
[ 2.414817] 14c2a000.i3c10: unsupported HCI version
[ 2.414884] mipi-i3c-hci 14c2a000.i3c10: probe with driver mipi-i3c-hci
failed with error -93
[ 2.415160] 14c2b000.i3c11: MIPI I3C HCI v0.0 r00
[ 2.415243] 14c2b000.i3c11: unsupported HCI version
[ 2.415310] mipi-i3c-hci 14c2b000.i3c11: probe with driver mipi-i3c-hci
failed with error -93
[ 2.415542] 14c2c000.i3c12: MIPI I3C HCI v0.0 r00
[ 2.415613] 14c2c000.i3c12: unsupported HCI version
[ 2.415679] mipi-i3c-hci 14c2c000.i3c12: probe with driver mipi-i3c-hci
failed with error -93
[ 2.415900] 14c2d000.i3c13: MIPI I3C HCI v0.0 r00
[ 2.415973] 14c2d000.i3c13: unsupported HCI version
[ 2.416041] mipi-i3c-hci 14c2d000.i3c13: probe with driver mipi-i3c-hci
failed with error -93
[ 2.416267] 14c2e000.i3c14: MIPI I3C HCI v0.0 r00
[ 2.416340] 14c2e000.i3c14: unsupported HCI version
[ 2.416405] mipi-i3c-hci 14c2e000.i3c14: probe with driver mipi-i3c-hci
failed with error -93
[ 2.416647] 14c2f000.i3c15: MIPI I3C HCI v0.0 r00
[ 2.416725] 14c2f000.i3c15: unsupported HCI version
[ 2.416790] mipi-i3c-hci 14c2f000.i3c15: probe with driver mipi-i3c-hci
failed with error -93
[ 2.418547] aspeed-video 120a0000.video: irq 106
[ 2.418735] aspeed-video 120a0000.video: dvi mode-detection irq 107
[ 2.418985] aspeed-video 120a0000.video: assigned reserved memory node video0
[ 2.432446] aspeed-video 120a0000.video: alloc mem size(18493440) at
0x000000047de00000 for pool
[ 2.435819] aspeed-video 120a0000.video: aspeed-video0 registered as
/dev/video0
[ 2.436890] aspeed-video 120a1000.video: irq 108
[ 2.437029] aspeed-video 120a1000.video: assigned reserved memory node video1
[ 2.449658] aspeed-video 120a1000.video: alloc mem size(18493440) at
0x000000047ac00000 for pool
[ 2.450250] aspeed-video 120a1000.video: aspeed-video1 registered as
/dev/video1
[ 2.458433] sdhci: Secure Digital Host Controller Interface driver
[ 2.458547] sdhci: Copyright(c) Pierre Ossman
[ 2.458614] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.461200] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 2.462065] sdhci-aspeed 12090100.sdhci: Configured for slot 0
[ 2.463137] aspeed_crypto 12070000.crypto: will run requests pump with
realtime priority
[ 2.466408] aspeed_crypto 12070000.crypto: will run requests pump with
realtime priority
[ 2.467319] aspeed-ufshcd 12c08200.ufshc: ufshcd_populate_vreg: Unable to
find vdd-hba-supply regulator, assuming enabled
[ 2.467557] aspeed-ufshcd 12c08200.ufshc: ufshcd_populate_vreg: Unable to
find vcc-supply regulator, assuming enabled
[ 2.467743] aspeed-ufshcd 12c08200.ufshc: ufshcd_populate_vreg: Unable to
find vccq-supply regulator, assuming enabled
[ 2.468017] aspeed-ufshcd 12c08200.ufshc: ufshcd_populate_vreg: Unable to
find vccq2-supply regulator, assuming enabled
[ 2.468196] aspeed_crypto 12070000.crypto: cannot find sbc node
[ 2.468648] aspeed_crypto 12070000.crypto: Aspeed Crypto Accelerator
successfully registered
[ 2.469278] aspeed-ufshcd 12c08200.ufshc: Command Descriptor Memory
allocation failed
[ 2.469443] aspeed-ufshcd 12c08200.ufshc: Memory allocation failed
[ 2.469825] aspeed-ufshcd 12c08200.ufshc: ufshcd_pltfrm_init() failed -12
[ 2.469962] aspeed-ufshcd 12c08200.ufshc: probe with driver aspeed-ufshcd
failed with error -12
[ 2.470412] aspeed_rsss 12080000.crypto: will run requests pump with
realtime priority
[ 2.471110] aspeed_rsss 12080000.crypto: RSA init failed
[ 2.471245] aspeed_rsss 12080000.crypto: probe with driver aspeed_rsss
failed with error -5
[ 2.472595] aspeed_ecdsa 12c1e000.crypto: probe with driver aspeed_ecdsa
failed with error -5
[ 2.473678] usbcore: registered new interface driver usbhid
[ 2.473827] usbhid: USB HID core driver
[ 2.485896] hw perfevents: enabled with armv8_cortex_a35 PMU driver, 7
(0,8000003f) counters available
[ 2.487770] optee: probing for conduit method.
I/TC: Reserved shared memory is disabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 2.488394] optee: revision 4.4 (8f645256efc0dc66)
[ 2.489279] watchdog: NMI not fully supported
[ 2.489417] watchdog: Hard watchdog permanently disabled
[ 2.490296] optee: dynamic shared memory is enabled
[ 2.496286] optee: initialized driver
[ 2.499251] mmc0: SDHCI controller on 12090100.sdhci [12090100.sdhci] using
ADMA 64-bit
[ 2.499601] pktgen: Packet Generator for packet performance testing.
Version: 2.75
[ 2.502051] NET: Registered PF_INET6 protocol family
[ 2.508037] Segment Routing with IPv6
[ 2.508286] In-situ OAM (IOAM) with IPv6
[ 2.508812] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.510670] NET: Registered PF_PACKET protocol family
[ 2.511122] can: controller area network core
[ 2.511471] NET: Registered PF_CAN protocol family
[ 2.511597] can: raw protocol
[ 2.511791] can: broadcast manager protocol
[ 2.512029] can: netlink gateway - max_hops=1
[ 2.512210] 8021q: 802.1Q VLAN Support v1.8
[ 2.520069] registered taskstats version 1
[ 2.521401] Loading compiled-in X.509 certificates
[ 2.531388] Demotion targets for Node 0: null
[ 2.532261] Key type .fscrypt registered
[ 2.532350] Key type fscrypt-provisioning registered
[ 2.564198] mmc0: Failed to initialize a non-removable card
[ 2.573543] alg: skcipher: aspeed-ctr-des encryption test failed (wrong result) on
test vector 0, cfg="in-place (one sglist)"
[ 2.573863] alg: self-tests for ctr(des) using aspeed-ctr-des failed (rc=-22)
[ 2.573938] ------------[ cut here ]------------
[ 2.574155] alg: self-tests for ctr(des) using aspeed-ctr-des failed (rc=-22)
[ 2.574401] WARNING: CPU: 3 PID: 116 at
/usr/src/kernel/crypto/testmgr.c:5829 alg_test+0x490/0x5bc
[ 2.574972] Modules linked in:
[ 2.575579] CPU: 3 UID: 0 PID: 116 Comm: cryptomgr_test Not tainted
6.18.3-v00.08.01-g172b7e27a30d #1 PREEMPT
[ 2.575776] Hardware name: AST2700 EVB (DT)
[ 2.575979] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.576125] pc : alg_test+0x490/0x5bc
[ 2.576215] lr : alg_test+0x490/0x5bc
[ 2.576286] sp : ffff800081f7bd50
[ 2.576358] x29: ffff800081f7bdf0 x28: 0000000000000004 x27: ffff800080eaa568
[ 2.576584] x26: 0000000000000000 x25: 00000000ffffffff x24: 0000000000000004
[ 2.576809] x23: ffff0000065d1680 x22: 0000000000001085 x21: ffff0000065d1600
[ 2.576981] x20: 00000000ffffffea x19: ffff800080eaa568 x18: 000000000000000a
[ 2.577104] x17: 32322d3d63722820 x16: 64656c6961662073 x15: 0000000000000000
[ 2.577223] x14: 0000000000000000 x13: 00000000ffff0a01 x12: 00000000ffffffea
[ 2.577345] x11: ffff800081f7bab8 x10: 00000000ffffefff x9 : ffff8000815ae3c8
[ 2.577486] x8 : ffff8000815ae420 x7 : 0000000000017fe8 x6 : c0000000ffffefff
[ 2.577609] x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : 0000000000000000
[ 2.577744] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000006de2400
[ 2.578021] Call trace:
[ 2.578164] alg_test+0x490/0x5bc (P)
[ 2.578302] cryptomgr_test+0x24/0x44
[ 2.578384] kthread+0x140/0x220
[ 2.578455] ret_from_fork+0x10/0x20
[ 2.578604] ---[ end trace 0000000000000000 ]---
[ 2.579215] alg: skcipher: aspeed-ctr-tdes encryption test failed (wrong result) on
test vector 0, cfg="in-place (one sglist)"
[ 2.579437] alg: self-tests for ctr(des3_ede) using aspeed-ctr-tdes failed
(rc=-22)
[ 2.579445] ------------[ cut here ]------------
[ 2.579673] alg: self-tests for ctr(des3_ede) using aspeed-ctr-tdes failed
(rc=-22)
[ 2.580184] WARNING: CPU: 0 PID: 115 at
/usr/src/kernel/crypto/testmgr.c:5829 alg_test+0x490/0x5bc
[ 2.580525] Modules linked in:
[ 2.580726] CPU: 0 UID: 0 PID: 115 Comm: cryptomgr_test Tainted: G W
6.18.3-v00.08.01-g172b7e27a30d #1 PREEMPT
[ 2.580940] Tainted: [W]=WARN
[ 2.580992] Hardware name: AST2700 EVB (DT)
[ 2.581058] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.581196] pc : alg_test+0x490/0x5bc
[ 2.581261] lr : alg_test+0x490/0x5bc
[ 2.581335] sp : ffff800081f73d50
[ 2.581392] x29: ffff800081f73df0 x28: 0000000000000004 x27: ffff800080eaa568
[ 2.581529] x26: 0000000000000000 x25: 00000000ffffffff x24: 0000000000000004
[ 2.581655] x23: ffff0000065d1880 x22: 0000000000001085 x21: ffff0000065d1800
[ 2.581781] x20: 00000000ffffffea x19: ffff800080eaa568 x18: 0000000000000000
[ 2.581904] x17: 0000000000000000 x16: 00000000e820414d x15: ffff000006de1290
[ 2.582027] x14: 00000000000002e0 x13: 0000000000000001 x12: 0000000000000001
[ 2.582149] x11: 00000000000000c0 x10: 0000000000000b50 x9 : ffff800081f73bc0
[ 2.582281] x8 : ffff000006de1db0 x7 : 0000000000000001 x6 : 0000000000007a4f
[ 2.582408] x5 : ffff0000054541e0 x4 : ffff000006de1200 x3 : ffff000006de5a00
[ 2.582538] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000006de1200
[ 2.582670] Call trace:
[ 2.582715] alg_test+0x490/0x5bc (P)
[ 2.582782] cryptomgr_test+0x24/0x44
[ 2.582856] kthread+0x140/0x220
[ 2.582921] ret_from_fork+0x10/0x20
[ 2.582989] ---[ end trace 0000000000000000 ]---
[ 2.620920] alg: skcipher: aspeed-ctr-aes encryption test failed (wrong result) on
test vector 0, cfg="in-place (one sglist)"
[ 2.621176] alg: self-tests for ctr(aes) using aspeed-ctr-aes failed (rc=-22)
[ 2.621185] ------------[ cut here ]------------
[ 2.621384] alg: self-tests for ctr(aes) using aspeed-ctr-aes failed (rc=-22)
[ 2.621420] WARNING: CPU: 0 PID: 117 at
/usr/src/kernel/crypto/testmgr.c:5829 alg_test+0x490/0x5bc
[ 2.621673] Modules linked in:
[ 2.621738] CPU: 0 UID: 0 PID: 117 Comm: cryptomgr_test Tainted: G W
6.18.3-v00.08.01-g172b7e27a30d #1 PREEMPT
[ 2.621925] Tainted: [W]=WARN
[ 2.621975] Hardware name: AST2700 EVB (DT)
[ 2.622044] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.622153] pc : alg_test+0x490/0x5bc
[ 2.622218] lr : alg_test+0x490/0x5bc
[ 2.622283] sp : ffff800081f83d50
[ 2.622337] x29: ffff800081f83df0 x28: 0000000000000004 x27: ffff800080eaa568
[ 2.622458] x26: 0000000000000000 x25: 00000000ffffffff x24: 0000000000000004
[ 2.622578] x23: ffff0000065d0e80 x22: 0000000000001085 x21: ffff0000065d0e00
[ 2.622694] x20: 00000000ffffffea x19: ffff800080eaa568 x18: 000000000000000a
[ 2.622811] x17: 32322d3d63722820 x16: 64656c6961662073 x15: 0000000000000000
[ 2.622931] x14: 0000000000000000 x13: 00000000ffff0a01 x12: 00000000ffffffea
[ 2.623061] x11: ffff800081f83ab8 x10: 00000000ffffefff x9 : ffff8000815ae3c8
[ 2.623200] x8 : ffff8000815ae420 x7 : 0000000000017fe8 x6 : c0000000ffffefff
[ 2.623325] x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : 0000000000000000
[ 2.623447] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000006de3600
[ 2.623570] Call trace:
[ 2.623625] alg_test+0x490/0x5bc (P)
[ 2.623690] cryptomgr_test+0x24/0x44
[ 2.623752] kthread+0x140/0x220
[ 2.623810] ret_from_fork+0x10/0x20
[ 2.623875] ---[ end trace 0000000000000000 ]---
[ 2.653308] aspeed_mbox_client 431880000.mbox-bootmcu-1: TX shmem: phys
0x0x0000000431880000 size 1048576
[ 2.653484] aspeed_mbox_client 431880000.mbox-bootmcu-1: RX shmem: phys
0x0x0000000431980000 size 1048576
[ 2.653616] aspeed_mbox_client 431880000.mbox-bootmcu-1: TX timeout: 10000 ms
