Hi Cédric The GNUTLS backend currently does not support CTR mode. Could you please try using either the GCRYPT or NETTLE backend instead?
I mentioned this issue in the cover letter here: https://patchwork.kernel.org/project/qemu-devel/cover/[email protected]/ Note: The GNUTLS crypto backend does not support CTR mode. If we decide to support CTR mode with the GNUTLS backend, I'll need to investigate whether the underlying GnuTLS library itself supports CTR mode. If it does, I'll prepare another patch series to add CTR mode support to the GNUTLS backend. The relevant code is here: https://github.com/qemu/qemu/blob/master/crypto/cipher-gnutls.c.inc#L26 Thanks, Jamin > From: Cédric Le Goater <[email protected]> > Sent: Monday, July 20, 2026 1:51 PM > To: Jamin Lin <[email protected]>; Daniel P. Berrangé > <[email protected]>; Peter Maydell <[email protected]>; Steven > Lee <[email protected]>; Troy Lee <[email protected]>; Kane > Chen <[email protected]>; Andrew Jeffery > <[email protected]>; Joel Stanley <[email protected]>; Eric Blake > <[email protected]>; Markus Armbruster <[email protected]>; Fabiano > Rosas <[email protected]>; Laurent Vivier <[email protected]>; Paolo Bonzini > <[email protected]>; open list:All patches CC here > <[email protected]>; open list:ASPEED BMCs > <[email protected]> > Cc: Troy Lee <[email protected]> > Subject: Re: [PATCH v2 17/17] tests/functional/aarch64/test_aspeed_ast2700: > Drop the AST2700 crypto self-test workaround > > On 7/15/26 05:33, Jamin Lin wrote: > > The AST2700 boot tests appended 'cryptomgr.notests=1' to the kernel > > command line to skip the Linux crypto manager self-tests. > > > > Now that the HACE crypto engine emulates the crypto command, the > > self-tests pass, so drop the workaround and let them run. This also > > exercises the HACE crypto emulation during the functional boot tests. > > > > Signed-off-by: Jamin Lin <[email protected]> > > --- > > tests/functional/aarch64/test_aspeed_ast2700a1.py | 5 ----- > > tests/functional/aarch64/test_aspeed_ast2700a2.py | 5 ----- > > tests/functional/aarch64/test_aspeed_ast2700fc.py | 5 ----- > > 3 files changed, 15 deletions(-) > > > > diff --git a/tests/functional/aarch64/test_aspeed_ast2700a1.py > > b/tests/functional/aarch64/test_aspeed_ast2700a1.py > > index b0c08854da..bc535449b5 100755 > > --- a/tests/functional/aarch64/test_aspeed_ast2700a1.py > > +++ b/tests/functional/aarch64/test_aspeed_ast2700a1.py > > @@ -51,10 +51,6 @@ def verify_vbootrom_firmware_flow(self): > > wait_for_console_pattern(self, 'pass') > > wait_for_console_pattern(self, 'Jumping to BL31 (Trusted > > Firmware-A)') > > > > - def disable_kernel_crypto_selftest(self): > > - exec_command_and_wait_for_pattern(self, > > - 'setenv bootargs "${bootargs} cryptomgr.notests=1"', '=>') > > - > > def enable_ast2700_pcie2(self): > > exec_command_and_wait_for_pattern(self, > > 'cp 100420000 403000000 900000', '=>') @@ -71,7 +67,6 > @@ > > def verify_openbmc_boot_start(self, enable_pcie=True): > > wait_for_console_pattern(self, 'U-Boot 2023.10') > > wait_for_console_pattern(self, 'Hit any key to stop autoboot') > > exec_command_and_wait_for_pattern(self, '\012', '=>') > > - self.disable_kernel_crypto_selftest() > > if enable_pcie: > > self.enable_ast2700_pcie2() > > else: > > diff --git a/tests/functional/aarch64/test_aspeed_ast2700a2.py > > b/tests/functional/aarch64/test_aspeed_ast2700a2.py > > index ed414999f4..5aea0a9dd0 100755 > > --- a/tests/functional/aarch64/test_aspeed_ast2700a2.py > > +++ b/tests/functional/aarch64/test_aspeed_ast2700a2.py > > @@ -51,10 +51,6 @@ def verify_vbootrom_firmware_flow(self): > > wait_for_console_pattern(self, 'pass') > > wait_for_console_pattern(self, 'Jumping to BL31 (Trusted > > Firmware-A)') > > > > - def disable_kernel_crypto_selftest(self): > > - exec_command_and_wait_for_pattern(self, > > - 'setenv bootargs "${bootargs} cryptomgr.notests=1"', '=>') > > - > > def enable_ast2700_pcie2(self): > > exec_command_and_wait_for_pattern(self, > > 'cp 100420000 403000000 900000', '=>') @@ -71,7 +67,6 > @@ > > def verify_openbmc_boot_start(self, enable_pcie=True): > > wait_for_console_pattern(self, 'U-Boot 2023.10') > > wait_for_console_pattern(self, 'Hit any key to stop autoboot') > > exec_command_and_wait_for_pattern(self, '\012', '=>') > > - self.disable_kernel_crypto_selftest() > > if enable_pcie: > > self.enable_ast2700_pcie2() > > else: > > diff --git a/tests/functional/aarch64/test_aspeed_ast2700fc.py > > b/tests/functional/aarch64/test_aspeed_ast2700fc.py > > index df889134ed..1648fa9dba 100755 > > --- a/tests/functional/aarch64/test_aspeed_ast2700fc.py > > +++ b/tests/functional/aarch64/test_aspeed_ast2700fc.py > > @@ -27,10 +27,6 @@ def do_test_aarch64_aspeed_sdk_start(self, image): > > > > self.vm.launch() > > > > - def disable_kernel_crypto_selftest(self): > > - exec_command_and_wait_for_pattern(self, > > - 'setenv bootargs "${bootargs} cryptomgr.notests=1"', '=>') > > - > > def enable_ast2700_pcie2(self): > > exec_command_and_wait_for_pattern(self, > > 'cp 100420000 403000000 900000', '=>') @@ -47,7 +43,6 > @@ > > def verify_openbmc_boot_and_login(self, name): > > wait_for_console_pattern(self, 'U-Boot 2023.10') > > wait_for_console_pattern(self, 'Hit any key to stop autoboot') > > exec_command_and_wait_for_pattern(self, '\012', '=>') > > - self.disable_kernel_crypto_selftest() > > self.enable_ast2700_pcie2() > > wait_for_console_pattern(self, 'Starting kernel ...') > > > > > There are still crypto tests errors. See below. Is it expected ? > > Thanks, > > C. > > > [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd040] > [ 0.000000] Linux version 6.18.3-v00.08.01-g172b7e27a30d > (oe-user@oe-host) (aarch64-openbmc-linux-gcc (GCC) 15.1.0, GNU ld (GNU > Binutils) 2.44.0.20250429) #1 SMP PREEMPT Wed Feb 18 09:06:34 CST 2026 > [ 0.000000] KASLR disabled due to lack of seed > [ 0.000000] Machine model: AST2700 EVB > [ 0.000000] Malformed early option 'earlycon' > [ 0.000000] Reserved memory: created DMA memory pool at > 0x000000047ff00000, size 1 MiB > [ 0.000000] OF: reserved mem: initialized node xdma0, compatible id > shared-dma-pool > [ 0.000000] OF: reserved mem: 0x000000047ff00000..0x000000047fffffff > (1024 KiB) nomap non-reusable xdma0 > [ 0.000000] Reserved memory: created DMA memory pool at > 0x000000047fe00000, size 1 MiB > [ 0.000000] OF: reserved mem: initialized node xdma1, compatible id > shared-dma-pool > [ 0.000000] OF: reserved mem: 0x000000047fe00000..0x000000047fefffff > (1024 KiB) nomap non-reusable xdma1 > [ 0.000000] Reserved memory: created CMA memory pool at > 0x000000047de00000, size 32 MiB > [ 0.000000] OF: reserved mem: initialized node video0, compatible id > shared-dma-pool > [ 0.000000] OF: reserved mem: 0x000000047de00000..0x000000047fdfffff > (32768 KiB) map reusable video0 > [ 0.000000] Reserved memory: created CMA memory pool at > 0x000000047ac00000, size 32 MiB > [ 0.000000] OF: reserved mem: initialized node video1, compatible id > shared-dma-pool > [ 0.000000] OF: reserved mem: 0x000000047ac00000..0x000000047cbfffff > (32768 KiB) map reusable video1 > [ 0.000000] Reserved memory: created CMA memory pool at > 0x000000047ce00000, size 16 MiB > [ 0.000000] OF: reserved mem: initialized node mcyc0, compatible id > shared-dma-pool > [ 0.000000] OF: reserved mem: 0x000000047ce00000..0x000000047ddfffff > (16384 KiB) map reusable mcyc0 > [ 0.000000] OF: reserved mem: > 0x0000000430000000..0x000000043007ffff (512 KiB) nomap non-reusable > trusted-firmware-a@430000000 > [ 0.000000] OF: reserved mem: > 0x0000000430080000..0x000000043107ffff (16384 KiB) nomap non-reusable > optee-core@430080000 > [ 0.000000] OF: reserved mem: 0x0000000428000000..0x000000042bffffff > (65536 KiB) nomap non-reusable eadf0-memory@428000000 > [ 0.000000] OF: reserved mem: 0x0000000424000000..0x0000000427ffffff > (65536 KiB) nomap non-reusable espi0-mmbi-memory@424000000 > [ 0.000000] Reserved memory: created DMA memory pool at > 0x0000000423800000, size 1 MiB > [ 0.000000] OF: reserved mem: initialized node > bmc-dev0-memory@423800000, compatible id shared-dma-pool > [ 0.000000] OF: reserved mem: 0x0000000423800000..0x00000004238fffff > (1024 KiB) nomap non-reusable bmc-dev0-memory@423800000 > [ 0.000000] OF: reserved mem: 0x0000000423a00000..0x0000000423bfffff > (2048 KiB) nomap non-reusable pcie0-mmbi0-memory@423a00000 > [ 0.000000] Reserved memory: created DMA memory pool at > 0x0000000423900000, size 1 MiB > [ 0.000000] OF: reserved mem: initialized node > bmc-dev1-memory@423900000, compatible id shared-dma-pool > [ 0.000000] OF: reserved mem: 0x0000000423900000..0x00000004239fffff > (1024 KiB) nomap non-reusable bmc-dev1-memory@423900000 > [ 0.000000] OF: reserved mem: 0x0000000423c00000..0x0000000423dfffff > (2048 KiB) nomap non-reusable pcie1-mmbi4-memory@423c00000 > [ 0.000000] OF: reserved mem: 0x0000000423e00000..0x0000000423ffffff > (2048 KiB) nomap non-reusable pcie2-mmbi0-memory@423e00000 > [ 0.000000] OF: reserved mem: 0x000000042c000000..0x000000042dffffff > (32768 KiB) nomap non-reusable ssp-memory@42c000000 > [ 0.000000] OF: reserved mem: 0x000000042e000000..0x000000042fffffff > (32768 KiB) nomap non-reusable tsp-memory@42e000000 > [ 0.000000] OF: reserved mem: > 0x0000000431080000..0x000000043187ffff (8192 KiB) nomap non-reusable > ipc-ssp-share@431080000 > [ 0.000000] OF: reserved mem: > 0x0000000431880000..0x0000000431b2ffff (2752 KiB) nomap non-reusable > ipc-bootmcu-share@431880000 > [ 0.000000] Reserved memory: created DMA memory pool at > 0x0000000431b30000, size 0 MiB > [ 0.000000] OF: reserved mem: initialized node > uhci0-reserved@431b30000, compatible id shared-dma-pool > [ 0.000000] OF: reserved mem: > 0x0000000431b30000..0x0000000431b6ffff (256 KiB) nomap non-reusable > uhci0-reserved@431b30000 > [ 0.000000] Reserved memory: created DMA memory pool at > 0x0000000431b70000, size 0 MiB > [ 0.000000] OF: reserved mem: initialized node > uhci1-reserved@431b70000, compatible id shared-dma-pool > [ 0.000000] OF: reserved mem: > 0x0000000431b70000..0x0000000431baffff (256 KiB) nomap non-reusable > uhci1-reserved@431b70000 > [ 0.000000] OF: reserved mem: > 0x0000000431bb0000..0x0000000431bbffff (64 KiB) nomap non-reusable > vbios-base0@431bb0000 > [ 0.000000] OF: reserved mem: > 0x0000000431bc0000..0x0000000431bcffff (64 KiB) nomap non-reusable > vbios-base1@431bc0000 > [ 0.000000] Reserved memory: created DMA memory pool at > 0x0000000431bd0000, size 0 MiB > [ 0.000000] OF: reserved mem: initialized node > mctp0-reserved@431bd0000, compatible id shared-dma-pool > [ 0.000000] OF: reserved mem: > 0x0000000431bd0000..0x0000000431bdffff (64 KiB) nomap non-reusable > mctp0-reserved@431bd0000 > [ 0.000000] Reserved memory: created DMA memory pool at > 0x0000000431be0000, size 0 MiB > [ 0.000000] OF: reserved mem: initialized node > mctp1-reserved@431be0000, compatible id shared-dma-pool > [ 0.000000] OF: reserved mem: > 0x0000000431be0000..0x0000000431beffff (64 KiB) nomap non-reusable > mctp1-reserved@431be0000 > [ 0.000000] Reserved memory: created DMA memory pool at > 0x0000000431bf0000, size 0 MiB > [ 0.000000] OF: reserved mem: initialized node > mctp2-reserved@431bf0000, compatible id shared-dma-pool > [ 0.000000] OF: reserved mem: 0x0000000431bf0000..0x0000000431bfffff > (64 KiB) nomap non-reusable mctp2-reserved@431bf0000 > [ 0.000000] NUMA: Faking a node at [mem > 0x0000000400000000-0x000000047fffffff] > [ 0.000000] NODE_DATA(0) allocated [mem 0x47a892d40-0x47a89533f] > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem > 0x0000000400000000-0x000000047fffffff] > [ 0.000000] DMA32 empty > [ 0.000000] Normal empty > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem > 0x0000000400000000-0x00000004237fffff] > [ 0.000000] node 0: [mem > 0x0000000423800000-0x0000000431bfffff] > [ 0.000000] node 0: [mem > 0x0000000431c00000-0x000000047fdfffff] > [ 0.000000] node 0: [mem 0x000000047fe00000-0x000000047fffffff] > [ 0.000000] Initmem setup node 0 [mem > 0x0000000400000000-0x000000047fffffff] > [ 0.000000] cma: Reserved 32 MiB at 0x0000000401800000 > [ 0.000000] psci: probing for conduit method from DT. > [ 0.000000] psci: PSCIv1.1 detected in firmware. > [ 0.000000] psci: Using standard PSCI v0.2 function IDs > [ 0.000000] psci: Trusted OS migration not required > [ 0.000000] psci: SMC Calling Convention v1.5 > [ 0.000000] percpu: Embedded 31 pages/cpu s88216 r8192 d30568 > u126976 > [ 0.000000] Detected VIPT I-cache on CPU0 > [ 0.000000] CPU features: detected: GICv3 CPU interface > [ 0.000000] alternatives: applying boot alternatives > [ 0.000000] Kernel command line: console=ttyS12,115200n8 > root=/dev/ram rw earlycon > [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = > 589824 bytes > [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 > bytes, linear) > [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 > bytes, linear) > [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 2MB > [ 0.000000] software IO TLB: area num 4. > [ 0.000000] software IO TLB: mapped [mem > 0x0000000478300000-0x0000000478500000] (2MB) > [ 0.000000] Fallback order for Node 0: 0 > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524288 > [ 0.000000] Policy zone: DMA > [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, > Nodes=1 > [ 0.000000] rcu: Preemptible hierarchical RCU implementation. > [ 0.000000] rcu: RCU event tracing is enabled. > [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to > nr_cpu_ids=4. > [ 0.000000] Trampoline variant of Tasks RCU enabled. > [ 0.000000] Tracing variant of Tasks RCU enabled. > [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 > jiffies. > [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 > [ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 > rcu_task_cpu_ids=4. > [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 > rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. > [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode > [ 0.000000] GICv3: 256 SPIs implemented > [ 0.000000] GICv3: 0 Extended SPIs implemented > [ 0.000000] Root IRQ handler: gic_handle_irq > [ 0.000000] GICv3: GICv3 features: 16 PPIs > [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=1 > [ 0.000000] GICv3: CPU0: found redistributor 0 region > 0:0x0000000012280000 > [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. > [ 0.000000] arch_timer: cp15 timer running at 1600.00MHz (phys). > [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff > max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns > [ 0.000037] sched_clock: 61 bits at 1600MHz, resolution 0ns, wraps every > 4398046511103ns > [ 0.006379] Console: colour dummy device 80x25 > [ 0.008502] Calibrating delay loop (skipped), value calculated using timer > frequency.. 3200.00 BogoMIPS (lpj=6400000) > [ 0.008572] pid_max: default: 32768 minimum: 301 > [ 0.010747] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, > linear) > [ 0.010795] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 > bytes, linear) > [ 0.037047] rcu: Hierarchical SRCU implementation. > [ 0.037077] rcu: Max phase no-delay instances is 1000. > [ 0.038351] Timer migration: 1 hierarchy levels; 8 children per group; 1 > crossnode level > [ 0.041363] ASPEED AST2700 rev A2 (06020103) > [ 0.042677] smp: Bringing up secondary CPUs ... > [ 0.045789] Detected VIPT I-cache on CPU1 > [ 0.046337] GICv3: CPU1: found redistributor 1 region > 0:0x00000000122a0000 > [ 0.046467] CPU1: Booted secondary processor 0x0000000001 > [0x411fd040] > [ 0.050519] Detected VIPT I-cache on CPU2 > [ 0.050686] GICv3: CPU2: found redistributor 2 region > 0:0x00000000122c0000 > [ 0.050765] CPU2: Booted secondary processor 0x0000000002 > [0x411fd040] > [ 0.052102] Detected VIPT I-cache on CPU3 > [ 0.052264] GICv3: CPU3: found redistributor 3 region > 0:0x00000000122e0000 > [ 0.052345] CPU3: Booted secondary processor 0x0000000003 > [0x411fd040] > [ 0.052712] smp: Brought up 1 node, 4 CPUs > [ 0.052729] SMP: Total of 4 processors activated. > [ 0.052743] CPU: All CPU(s) started at EL2 > [ 0.052780] CPU features: detected: 32-bit EL0 Support > [ 0.052821] CPU features: detected: CRC32 instructions > [ 0.052910] CPU features: detected: PMUv3 > [ 0.059753] alternatives: applying system-wide alternatives > [ 0.070608] Memory: 1673568K/2097152K available (14592K kernel code, > 2014K rwdata, 5568K rodata, 1408K init, 524K bss, 303892K reserved, 114688K > cma-reserved) > [ 0.088349] devtmpfs: initialized > [ 0.110897] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, > max_idle_ns: 7645041785100000 ns > [ 0.111263] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, > linear) > [ 0.111895] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, > total 64 KiB, linear). > [ 0.113861] 26688 pages in range for non-PLT usage > [ 0.114239] 518208 pages in range for PLT usage > [ 0.115151] pinctrl core: initialized pinctrl subsystem > [ 0.135658] NET: Registered PF_NETLINK/PF_ROUTE protocol family > [ 0.144194] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic > allocations > [ 0.144873] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for > atomic allocations > [ 0.145400] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for > atomic allocations > [ 0.145718] audit: initializing netlink subsys (disabled) > [ 0.147488] audit: type=2000 audit(0.140:1): state=initialized > audit_enabled=0 res=1 > [ 0.149211] cpuidle: using governor menu > [ 0.149955] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. > [ 0.150560] ASID allocator initialised with 65536 entries > [ 0.216875] iommu: Default domain type: Translated > [ 0.216907] iommu: DMA domain TLB invalidation policy: strict mode > [ 0.220788] SCSI subsystem initialized > [ 0.221600] usbcore: registered new interface driver usbfs > [ 0.221813] usbcore: registered new interface driver hub > [ 0.221908] usbcore: registered new device driver usb > [ 0.222221] mc: Linux media interface: v0.10 > [ 0.222262] videodev: Linux video capture interface: v2.00 > [ 0.222358] pps_core: LinuxPPS API ver. 1 registered > [ 0.222364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo > Giometti <[email protected]> > [ 0.222392] PTP clock support registered > [ 0.222497] EDAC MC: Ver: 3.0.0 > [ 0.223354] scmi_core: SCMI protocol bus registered > [ 0.231561] mctp: management component transport protocol core > [ 0.231573] NET: Registered PF_MCTP protocol family > [ 0.232784] vgaarb: loaded > [ 0.235288] clocksource: Switched to clocksource arch_sys_counter > [ 0.237125] VFS: Disk quotas dquot_6.6.0 > [ 0.237189] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.252368] NET: Registered PF_INET protocol family > [ 0.253271] IP idents hash table entries: 32768 (order: 6, 262144 bytes, > linear) > [ 0.256584] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, > 16384 bytes, linear) > [ 0.256622] Table-perturb hash table entries: 65536 (order: 6, 262144 > bytes, linear) > [ 0.256661] TCP established hash table entries: 16384 (order: 5, 131072 > bytes, linear) > [ 0.257174] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, > linear) > [ 0.257342] TCP: Hash tables configured (established 16384 bind 16384) > [ 0.258127] UDP hash table entries: 1024 (order: 4, 65536 bytes, linear) > [ 0.258261] UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes, > linear) > [ 0.258919] NET: Registered PF_UNIX/PF_LOCAL protocol family > [ 0.259388] PCI: CLS 0 bytes, default 64 > [ 0.262222] Trying to unpack rootfs image as initramfs... > [ 0.262737] Initialise system trusted keyrings > [ 0.263942] workingset: timestamp_bits=42 max_order=19 > bucket_order=0 > [ 0.266013] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 0.266194] jffs2: version 2.2. (SUMMARY) © 2001-2006 Red Hat, Inc. > [ 0.296367] NET: Registered PF_ALG protocol family > [ 0.296561] Key type asymmetric registered > [ 0.296676] Asymmetric key parser 'x509' registered > [ 0.297006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major > 243) > [ 0.297097] io scheduler mq-deadline registered > [ 0.297134] io scheduler kyber registered > [ 0.297360] io scheduler bfq registered > [ 0.310863] aspeed_usb_phy3 12010000.usb-phy3: Probed USB PHY3 > [ 0.311709] aspeed_usb_phy3 12020000.usb-phy3: Probed USB PHY3 > [ 0.323247] ledtrig-cpu: registered to indicate activity on CPUs > [ 0.324971] ipmi-bt-host 12c19140.pcie-ibt: initialised channel 2 at IO > address 0xe4 > [ 0.325436] ipmi-bt-host 12c19940.pcie-ibt: initialised channel 3 at IO > address 0xe4 > [ 0.326029] ipmi-bt-host 14c31140.ibt: initialised channel 0 at IO address > 0xe4 > [ 0.326393] ipmi-bt-host 14c32140.ibt: initialised channel 1 at IO address > 0xe4 > [ 0.327619] aspeed-kcs-bmc 12c19024.pcie-kcs: Initialised IPMI client for > channel 8 > [ 0.327656] aspeed-kcs-bmc 12c19024.pcie-kcs: Initialised channel 8 at IO > address 0x3a0 > [ 0.328103] aspeed-kcs-bmc 12c19028.pcie-kcs: Initialised IPMI client for > channel 9 > [ 0.328112] aspeed-kcs-bmc 12c19028.pcie-kcs: Initialised channel 9 at IO > address 0x3a8 > [ 0.328481] aspeed-kcs-bmc 12c1902c.pcie-kcs: Initialised IPMI client for > channel 10 > [ 0.328490] aspeed-kcs-bmc 12c1902c.pcie-kcs: Initialised channel 10 at > IO address 0x3a2 > [ 0.328832] aspeed-kcs-bmc 12c19114.pcie-kcs: Initialised IPMI client for > channel 11 > [ 0.328841] aspeed-kcs-bmc 12c19114.pcie-kcs: Initialised channel 11 at > IO address 0x3a4 > [ 0.329240] aspeed-kcs-bmc 12c19824.pcie-kcs: Initialised IPMI client for > channel 12 > [ 0.329248] aspeed-kcs-bmc 12c19824.pcie-kcs: Initialised channel 12 at > IO address 0x3a0 > [ 0.329852] aspeed-kcs-bmc 12c19828.pcie-kcs: Initialised IPMI client for > channel 13 > [ 0.329860] aspeed-kcs-bmc 12c19828.pcie-kcs: Initialised channel 13 at > IO address 0x3a8 > [ 0.330154] aspeed-kcs-bmc 12c1982c.pcie-kcs: Initialised IPMI client for > channel 14 > [ 0.330162] aspeed-kcs-bmc 12c1982c.pcie-kcs: Initialised channel 14 at > IO address 0x3a2 > [ 0.330497] aspeed-kcs-bmc 12c19914.pcie-kcs: Initialised IPMI client for > channel 15 > [ 0.330506] aspeed-kcs-bmc 12c19914.pcie-kcs: Initialised channel 15 at > IO address 0x3a4 > [ 0.331245] aspeed-kcs-bmc 14c31024.lpc-kcs: Initialised IPMI client for > channel 0 > [ 0.331256] aspeed-kcs-bmc 14c31024.lpc-kcs: Initialised channel 0 at IO > address 0xca0 > [ 0.331599] aspeed-kcs-bmc 14c31028.lpc-kcs: Initialised IPMI client for > channel 1 > [ 0.331608] aspeed-kcs-bmc 14c31028.lpc-kcs: Initialised channel 1 at IO > address 0xca8 > [ 0.332047] aspeed-kcs-bmc 14c3102c.lpc-kcs: Initialised IPMI client for > channel 2 > [ 0.332058] aspeed-kcs-bmc 14c3102c.lpc-kcs: Initialised channel 2 at IO > address 0xca2 > [ 0.332393] aspeed-kcs-bmc 14c31114.lpc-kcs: Initialised IPMI client for > channel 3 > [ 0.332402] aspeed-kcs-bmc 14c31114.lpc-kcs: Initialised channel 3 at IO > address 0xca4 > [ 0.332793] aspeed-kcs-bmc 14c32024.kcs: Initialised IPMI client for > channel 4 > [ 0.332801] aspeed-kcs-bmc 14c32024.kcs: Initialised channel 4 at IO > address 0xca0 > [ 0.333107] aspeed-kcs-bmc 14c32028.kcs: Initialised IPMI client for > channel 5 > [ 0.333115] aspeed-kcs-bmc 14c32028.kcs: Initialised channel 5 at IO > address 0xca8 > [ 0.333408] aspeed-kcs-bmc 14c3202c.kcs: Initialised IPMI client for > channel 6 > [ 0.333425] aspeed-kcs-bmc 14c3202c.kcs: Initialised channel 6 at IO > address 0xca2 > [ 0.333731] aspeed-kcs-bmc 14c32114.kcs: Initialised IPMI client for > channel 7 > [ 0.333739] aspeed-kcs-bmc 14c32114.kcs: Initialised channel 7 at IO > address 0xca4 > [ 0.335242] aspeed_bmc_dev 12110000.bmc-dev: reserved memory is > beyond device's set DMA address range > [ 0.335287] aspeed_bmc_dev 12110000.bmc-dev: assigned reserved > memory node bmc-dev0-memory@423800000 > [ 0.336909] aspeed_bmc_dev 12110000.bmc-dev: aspeed bmc device: > driver successfully loaded. > [ 0.337060] aspeed_bmc_dev 12120000.bmc-dev: reserved memory is > beyond device's set DMA address range > [ 0.337068] aspeed_bmc_dev 12120000.bmc-dev: assigned reserved > memory node bmc-dev1-memory@423900000 > [ 0.337826] aspeed_bmc_dev 12120000.bmc-dev: aspeed bmc device: > driver successfully loaded. > [ 0.343471] aspeed-uart-routing 14c31098.uart-routing: module loaded > [ 0.343602] aspeed-uart-routing 14c32098.uart-routing: module loaded > [ 0.344331] aspeed-xdma 12c04000.xdma: reserved memory is beyond > device's set DMA address range > [ 0.344341] aspeed-xdma 12c04000.xdma: assigned reserved memory > node xdma0 > [ 0.346934] aspeed-xdma 12c05000.xdma: reserved memory is beyond > device's set DMA address range > [ 0.346945] aspeed-xdma 12c05000.xdma: assigned reserved memory > node xdma1 > [ 0.389006] aspeed_usb_phy3 12010000.usb-phy3: Wait phy3 init timed > out > [ 0.389059] phy phy-12010000.usb-phy3.3: phy init failed --> -110 > [ 0.389134] aspeed_usb_hp soc@10000000:usb3ahp: failed to init usb3 > phy > [ 0.389309] aspeed_usb_hp soc@10000000:usb3ahp: probe with driver > aspeed_usb_hp failed with error -110 > [ 0.402300] aspeed_usb_phy3 12020000.usb-phy3: Wait phy3 init timed > out > [ 0.402312] phy phy-12020000.usb-phy3.4: phy init failed --> -110 > [ 0.402319] aspeed_usb_hp soc@10000000:usb3bhp: failed to init usb3 > phy > [ 0.402325] aspeed_usb_hp soc@10000000:usb3bhp: probe with driver > aspeed_usb_hp failed with error -110 > [ 0.405370] aspeed_pcie_mmbi 12c21000.e2m-config:pcie0-mmbi@0: > ASPEED PCIe MMBI Dev 0: driver successfully loaded. > [ 0.406781] aspeed_pcie_mmbi 12c22000.e2m-config:pcie1-mmbi@4: > ASPEED PCIe MMBI Dev 1: driver successfully loaded. > [ 0.408663] aspeed-mctp 12c06000.mctp0: assigned reserved memory > node mctp0-reserved@431bd0000 > [ 0.412243] aspeed-mctp 12c07000.mctp1: assigned reserved memory > node mctp1-reserved@431be0000 > [ 0.413541] aspeed-mctp 14c1a000.mctp2: assigned reserved memory > node mctp2-reserved@431bf0000 > [ 0.415109] ast2700_otp 14c07000.otp: Aspeed OTP driver successfully > registered > [ 0.458099] Freeing initrd memory: 1312K > [ 0.489832] aspeed-espi 14c05000.espi: assigned reserved memory node > mcyc0 > [ 0.495645] aspeed-espi 14c05000.espi: eDAF mode: 0x2 > [ 0.496444] aspeed-espi 14c05000.espi: module loaded > [ 0.497026] ast2700-rtc-over-espi 14c3d000.rtc-over_espi: RTC not ready, > deferring probe > [ 0.548836] Serial: 8250/16550 driver, 23 ports, IRQ sharing enabled > [ 0.561470] 12c18000.serial: ttyS19 at MMIO 0x12c18000 (irq = 78, > base_baud = 25000000) is a ASPEED VUART > [ 0.563500] 12c18100.serial: ttyS20 at MMIO 0x12c18100 (irq = 79, > base_baud = 25000000) is a ASPEED VUART > [ 0.564507] 12c18200.serial: ttyS21 at MMIO 0x12c18200 (irq = 80, > base_baud = 25000000) is a ASPEED VUART > [ 0.565501] 12c18300.serial: ttyS22 at MMIO 0x12c18300 (irq = 81, > base_baud = 25000000) is a ASPEED VUART > [ 0.566848] 14c33200.serial: ttyS2 at MMIO 0x14c33200 (irq = 82, > base_baud = 115384) is a 16550A > [ 0.568986] 14c33800.serial: ttyS9 at MMIO 0x14c33800 (irq = 83, > base_baud = 115384) is a 16550A > [ 0.570059] 14c33b00.serial: ttyS12 at MMIO 0x14c33b00 (irq = 84, > base_baud = 115384) is a 16550A > [ 0.571430] printk: legacy console [ttyS12] enabled > [ 0.599367] DWC_TRNG_DriverSDK_1.00a > [ 0.599866] NIST_TRNG: Hardware rel_num=0x0, ext_ver=0x0, > ext_enum=0x0 > [ 1.081562] wait_on_: failed timeout: 00000000 > [ 1.081679] NIST_TRNG init failed (-21) > [ 1.081882] nist_trng nist_trng: probe with driver nist_trng failed with > error -21 > [ 1.100031] brd: module loaded > [ 1.108016] loop: module loaded > [ 1.137960] spi-aspeed-smc 14000000.spi: user mode and normal read are > used > [ 1.141534] spi-nor spi0.0: supply vcc not found, using dummy regulator > [ 1.162328] spi-aspeed-smc 14000000.spi: CE0 read buswidth: 4 > [0x406c0641] > [ 1.162556] spi-aspeed-smc 14000000.spi: CE0 write buswidth: 4 > [0x40340602] > [ 1.215999] 5 fixed-partitions partitions found on MTD device bmc > [ 1.216161] Creating 5 MTD partitions on "bmc": > [ 1.216316] 0x000000000000-0x000000400000 : "u-boot" > [ 1.218264] 0x000000400000-0x000000420000 : "u-boot-env" > [ 1.219554] 0x000000420000-0x000000d20000 : "kernel" > [ 1.220982] 0x000000d20000-0x000006000000 : "rofs" > [ 1.222261] 0x000006000000-0x000008000000 : "rwfs" > [ 1.227788] spi-nor spi0.1: supply vcc not found, using dummy regulator > [ 1.228829] spi-aspeed-smc 14000000.spi: Calibration area too uniform > [ 1.229072] spi-aspeed-smc 14000000.spi: CE1 read buswidth: 4 > [0x406c0641] > [ 1.229186] spi-aspeed-smc 14000000.spi: CE1 write buswidth: 4 > [0x40340602] > [ 1.247107] spi-aspeed-smc 14010000.spi: user mode and normal read are > used > [ 1.248480] spi-nor spi1.0: supply vcc not found, using dummy regulator > [ 1.249664] spi-aspeed-smc 14010000.spi: Calibration area too uniform > [ 1.249758] spi-aspeed-smc 14010000.spi: CE0 read buswidth: 2 > [0x203c0641] > [ 1.249851] spi-aspeed-smc 14010000.spi: CE0 write buswidth: 1 > [0x00120602] > [ 1.259585] spi-aspeed-smc 14020000.spi: user mode and normal read are > used > [ 1.260535] spi-nor spi2.0: supply vcc not found, using dummy regulator > [ 1.260863] spi-nor spi2.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00 > [ 1.264807] spi_aspeed_txrx 14030000.spi: cs: 0, ctrl_val: 0x00000407 > [ 1.279202] CAN device driver interface > [ 2.288754] aspeed_can 14c3e000.can (unnamed net_device) > (uninitialized): timed out for config mode > [ 2.289000] aspeed_can 14c3e000.can: probe with driver aspeed_can > failed with error -110 > [ 2.291357] ftgmac100 14050000.ethernet: Read MAC address > 52:54:00:12:34:56 from chip > [ 2.292825] RTL8211E Gigabit Ethernet 14040000.mdio-1:00: attached PHY > driver (mii_bus:phy_addr=14040000.mdio-1:00, irq=POLL) > [ 2.312021] ftgmac100 14050000.ethernet eth0: irq 86, mapped at > (____ptrval____) > [ 2.312736] ftgmac100 14060000.ethernet: Read MAC address > 52:54:00:12:34:57 from chip > [ 2.312994] RTL8211E Gigabit Ethernet 14040008.mdio-1:00: attached PHY > driver (mii_bus:phy_addr=14040008.mdio-1:00, irq=POLL) > [ 2.331522] ftgmac100 14060000.ethernet eth1: irq 87, mapped at > (____ptrval____) > [ 2.331821] e100: Intel(R) PRO/100 Network Driver > [ 2.331879] e100: Copyright(c) 1999-2006 Intel Corporation > [ 2.332018] e1000: Intel(R) PRO/1000 Network Driver > [ 2.332088] e1000: Copyright (c) 1999-2006 Intel Corporation. > [ 2.332213] e1000e: Intel(R) PRO/1000 Network Driver > [ 2.332303] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. > [ 2.332431] igb: Intel(R) Gigabit Ethernet Network Driver > [ 2.332511] igb: Copyright (c) 2007-2014 Intel Corporation. > [ 2.332639] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver > [ 2.332726] ixgbe: Copyright (c) 1999-2016 Intel Corporation. > [ 2.333468] MCTP I2C interface driver > [ 2.333816] usbcore: registered new interface driver mctp-usb > [ 2.333952] usbcore: registered new interface driver cdc_ether > [ 2.334071] usbcore: registered new interface driver cdc_eem > [ 2.334194] usbcore: registered new interface driver net1080 > [ 2.334317] usbcore: registered new interface driver cdc_subset > [ 2.334434] usbcore: registered new interface driver zaurus > [ 2.334550] usbcore: registered new interface driver cdc_ncm > [ 2.334670] usbcore: registered new interface driver r8153_ecm > [ 2.336620] platform-uhci 14110000.usb: Detected 2 ports from > device-tree > [ 2.336765] platform-uhci 14110000.usb: Enabled Aspeed implementation > workarounds > [ 2.337202] platform-uhci 14110000.usb: Generic UHCI Host Controller > [ 2.337204] ehci-platform 14123000.usb: EHCI Host Controller > [ 2.337639] ehci-platform 14123000.usb: new USB bus registered, assigned > bus number 2 > [ 2.337640] platform-uhci 14110000.usb: new USB bus registered, assigned > bus number 1 > [ 2.338409] platform-uhci 14110000.usb: irq 89, io mem 0x14110000 > [ 2.338627] platform-uhci 14110000.usb: Device does not have specific > DMA pool > [ 2.339110] ehci-platform 14123000.usb: irq 88, io mem 0x14123000 > [ 2.344125] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0001, bcdDevice= 6.18 > [ 2.344272] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.344375] usb usb1: Product: Generic UHCI Host Controller > [ 2.344456] usb usb1: Manufacturer: Linux > 6.18.3-v00.08.01-g172b7e27a30d uhci_hcd > [ 2.344560] usb usb1: SerialNumber: 14110000.usb > [ 2.347100] hub 1-0:1.0: USB hub found > [ 2.347598] hub 1-0:1.0: 2 ports detected > [ 2.351199] ehci-platform 14123000.usb: USB 2.0 started, EHCI 1.00 > [ 2.351206] usbcore: registered new interface driver cdc_acm > [ 2.351251] cdc_acm: USB Abstract Control Model driver for USB modems > and ISDN adapters > [ 2.351648] usb usb2: New USB device found, idVendor=1d6b, > idProduct=0002, bcdDevice= 6.18 > [ 2.351794] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.351918] usb usb2: Product: EHCI Host Controller > [ 2.351999] usb usb2: Manufacturer: Linux > 6.18.3-v00.08.01-g172b7e27a30d ehci_hcd > [ 2.352005] usbcore: registered new interface driver uas > [ 2.352094] usb usb2: SerialNumber: 14123000.usb > [ 2.352418] usbcore: registered new interface driver usb-storage > [ 2.352828] usbcore: registered new interface driver pl2303 > [ 2.352891] hub 2-0:1.0: USB hub found > [ 2.353110] usbserial: USB Serial support registered for pl2303 > [ 2.353190] hub 2-0:1.0: 6 ports detected > [ 2.363145] platform-uhci 14110000.usb: Controller not stopped yet! > [ 2.366436] aspeed_vhub 12060000.usb-vhub: PCIe EHCI to vhub > [ 2.368834] aspeed_vhub 12060000.usb-vhub: Initialized virtual hub in > USB2 mode > [ 2.379205] aspeed_vhub 12062000.usb-vhub: PCIe EHCI to vhub > [ 2.380707] aspeed_vhub 12062000.usb-vhub: Initialized virtual hub in > USB2 mode > [ 2.392449] aspeed_vhub 14120000.usb-vhub: Initialized virtual hub in > USB2 mode > [ 2.396382] aspeed-rtc 12c0f000.rtc: registered as rtc0 > [ 2.396904] aspeed-rtc 12c0f000.rtc: setting system clock to > 1970-01-01T01:01:01 UTC (3661) > [ 2.397557] i2c_dev: i2c /dev entries driver > [ 2.401063] i2c_ast2600 14c0f100.i2c-bus: i2c-bus [0]: adapter [100 KHz] > mode [2] version [1] > [ 2.401971] i2c_ast2600 14c0f200.i2c-bus: i2c-bus [1]: adapter [100 KHz] > mode [2] version [1] > [ 2.402763] i2c_ast2600 14c0f300.i2c-bus: i2c-bus [2]: adapter [100 KHz] > mode [2] version [1] > [ 2.403689] i2c_ast2600 14c0f400.i2c-bus: i2c-bus [3]: adapter [100 KHz] > mode [2] version [1] > [ 2.404448] i2c_ast2600 14c0f500.i2c-bus: i2c-bus [4]: adapter [100 KHz] > mode [2] version [1] > [ 2.405292] i2c_ast2600 14c0f600.i2c-bus: i2c-bus [5]: adapter [100 KHz] > mode [2] version [1] > [ 2.406064] i2c_ast2600 14c0f700.i2c-bus: i2c-bus [6]: adapter [100 KHz] > mode [2] version [1] > [ 2.406787] i2c_ast2600 14c0f800.i2c-bus: i2c-bus [7]: adapter [100 KHz] > mode [2] version [1] > [ 2.407562] i2c_ast2600 14c0f900.i2c-bus: i2c-bus [8]: adapter [100 KHz] > mode [2] version [1] > [ 2.408366] i2c_ast2600 14c0fc00.i2c-bus: i2c-bus [11]: adapter [100 KHz] > mode [2] version [1] > [ 2.409112] i2c_ast2600 14c0fd00.i2c-bus: i2c-bus [12]: adapter [100 KHz] > mode [2] version [1] > [ 2.409807] i2c_ast2600 14c0fe00.i2c-bus: i2c-bus [13]: adapter [100 KHz] > mode [2] version [1] > [ 2.410928] 14c20000.i3c0: MIPI I3C HCI v0.0 r00 > [ 2.411100] 14c20000.i3c0: unsupported HCI version > [ 2.411231] mipi-i3c-hci 14c20000.i3c0: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.411493] 14c21000.i3c1: MIPI I3C HCI v0.0 r00 > [ 2.411571] 14c21000.i3c1: unsupported HCI version > [ 2.411636] mipi-i3c-hci 14c21000.i3c1: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.411863] 14c22000.i3c2: MIPI I3C HCI v0.0 r00 > [ 2.411934] 14c22000.i3c2: unsupported HCI version > [ 2.411999] mipi-i3c-hci 14c22000.i3c2: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.412217] 14c23000.i3c3: MIPI I3C HCI v0.0 r00 > [ 2.412290] 14c23000.i3c3: unsupported HCI version > [ 2.412355] mipi-i3c-hci 14c23000.i3c3: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.412574] 14c24000.i3c4: MIPI I3C HCI v0.0 r00 > [ 2.412644] 14c24000.i3c4: unsupported HCI version > [ 2.412710] mipi-i3c-hci 14c24000.i3c4: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.412927] 14c25000.i3c5: MIPI I3C HCI v0.0 r00 > [ 2.412997] 14c25000.i3c5: unsupported HCI version > [ 2.413062] mipi-i3c-hci 14c25000.i3c5: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.413280] 14c26000.i3c6: MIPI I3C HCI v0.0 r00 > [ 2.413350] 14c26000.i3c6: unsupported HCI version > [ 2.413414] mipi-i3c-hci 14c26000.i3c6: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.413659] 14c27000.i3c7: MIPI I3C HCI v0.0 r00 > [ 2.413734] 14c27000.i3c7: unsupported HCI version > [ 2.413798] mipi-i3c-hci 14c27000.i3c7: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.414017] 14c28000.i3c8: MIPI I3C HCI v0.0 r00 > [ 2.414087] 14c28000.i3c8: unsupported HCI version > [ 2.414153] mipi-i3c-hci 14c28000.i3c8: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.414371] 14c29000.i3c9: MIPI I3C HCI v0.0 r00 > [ 2.414442] 14c29000.i3c9: unsupported HCI version > [ 2.414506] mipi-i3c-hci 14c29000.i3c9: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.414742] 14c2a000.i3c10: MIPI I3C HCI v0.0 r00 > [ 2.414817] 14c2a000.i3c10: unsupported HCI version > [ 2.414884] mipi-i3c-hci 14c2a000.i3c10: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.415160] 14c2b000.i3c11: MIPI I3C HCI v0.0 r00 > [ 2.415243] 14c2b000.i3c11: unsupported HCI version > [ 2.415310] mipi-i3c-hci 14c2b000.i3c11: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.415542] 14c2c000.i3c12: MIPI I3C HCI v0.0 r00 > [ 2.415613] 14c2c000.i3c12: unsupported HCI version > [ 2.415679] mipi-i3c-hci 14c2c000.i3c12: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.415900] 14c2d000.i3c13: MIPI I3C HCI v0.0 r00 > [ 2.415973] 14c2d000.i3c13: unsupported HCI version > [ 2.416041] mipi-i3c-hci 14c2d000.i3c13: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.416267] 14c2e000.i3c14: MIPI I3C HCI v0.0 r00 > [ 2.416340] 14c2e000.i3c14: unsupported HCI version > [ 2.416405] mipi-i3c-hci 14c2e000.i3c14: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.416647] 14c2f000.i3c15: MIPI I3C HCI v0.0 r00 > [ 2.416725] 14c2f000.i3c15: unsupported HCI version > [ 2.416790] mipi-i3c-hci 14c2f000.i3c15: probe with driver mipi-i3c-hci > failed with error -93 > [ 2.418547] aspeed-video 120a0000.video: irq 106 > [ 2.418735] aspeed-video 120a0000.video: dvi mode-detection irq 107 > [ 2.418985] aspeed-video 120a0000.video: assigned reserved memory > node video0 > [ 2.432446] aspeed-video 120a0000.video: alloc mem size(18493440) at > 0x000000047de00000 for pool > [ 2.435819] aspeed-video 120a0000.video: aspeed-video0 registered as > /dev/video0 > [ 2.436890] aspeed-video 120a1000.video: irq 108 > [ 2.437029] aspeed-video 120a1000.video: assigned reserved memory > node video1 > [ 2.449658] aspeed-video 120a1000.video: alloc mem size(18493440) at > 0x000000047ac00000 for pool > [ 2.450250] aspeed-video 120a1000.video: aspeed-video1 registered as > /dev/video1 > [ 2.458433] sdhci: Secure Digital Host Controller Interface driver > [ 2.458547] sdhci: Copyright(c) Pierre Ossman > [ 2.458614] sdhci-pltfm: SDHCI platform and OF driver helper > [ 2.461200] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... > [ 2.462065] sdhci-aspeed 12090100.sdhci: Configured for slot 0 > [ 2.463137] aspeed_crypto 12070000.crypto: will run requests pump with > realtime priority > [ 2.466408] aspeed_crypto 12070000.crypto: will run requests pump with > realtime priority > [ 2.467319] aspeed-ufshcd 12c08200.ufshc: ufshcd_populate_vreg: Unable > to find vdd-hba-supply regulator, assuming enabled > [ 2.467557] aspeed-ufshcd 12c08200.ufshc: ufshcd_populate_vreg: Unable > to find vcc-supply regulator, assuming enabled > [ 2.467743] aspeed-ufshcd 12c08200.ufshc: ufshcd_populate_vreg: Unable > to find vccq-supply regulator, assuming enabled > [ 2.468017] aspeed-ufshcd 12c08200.ufshc: ufshcd_populate_vreg: Unable > to find vccq2-supply regulator, assuming enabled > [ 2.468196] aspeed_crypto 12070000.crypto: cannot find sbc node > [ 2.468648] aspeed_crypto 12070000.crypto: Aspeed Crypto Accelerator > successfully registered > [ 2.469278] aspeed-ufshcd 12c08200.ufshc: Command Descriptor Memory > allocation failed > [ 2.469443] aspeed-ufshcd 12c08200.ufshc: Memory allocation failed > [ 2.469825] aspeed-ufshcd 12c08200.ufshc: ufshcd_pltfrm_init() failed -12 > [ 2.469962] aspeed-ufshcd 12c08200.ufshc: probe with driver > aspeed-ufshcd failed with error -12 > [ 2.470412] aspeed_rsss 12080000.crypto: will run requests pump with > realtime priority > [ 2.471110] aspeed_rsss 12080000.crypto: RSA init failed > [ 2.471245] aspeed_rsss 12080000.crypto: probe with driver aspeed_rsss > failed with error -5 > [ 2.472595] aspeed_ecdsa 12c1e000.crypto: probe with driver > aspeed_ecdsa failed with error -5 > [ 2.473678] usbcore: registered new interface driver usbhid > [ 2.473827] usbhid: USB HID core driver > [ 2.485896] hw perfevents: enabled with armv8_cortex_a35 PMU driver, 7 > (0,8000003f) counters available > [ 2.487770] optee: probing for conduit method. > I/TC: Reserved shared memory is disabled > I/TC: Dynamic shared memory is enabled > I/TC: Normal World virtualization support is disabled > I/TC: Asynchronous notifications are disabled > [ 2.488394] optee: revision 4.4 (8f645256efc0dc66) > [ 2.489279] watchdog: NMI not fully supported > [ 2.489417] watchdog: Hard watchdog permanently disabled > [ 2.490296] optee: dynamic shared memory is enabled > [ 2.496286] optee: initialized driver > [ 2.499251] mmc0: SDHCI controller on 12090100.sdhci [12090100.sdhci] > using ADMA 64-bit > [ 2.499601] pktgen: Packet Generator for packet performance testing. > Version: 2.75 > [ 2.502051] NET: Registered PF_INET6 protocol family > [ 2.508037] Segment Routing with IPv6 > [ 2.508286] In-situ OAM (IOAM) with IPv6 > [ 2.508812] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > [ 2.510670] NET: Registered PF_PACKET protocol family > [ 2.511122] can: controller area network core > [ 2.511471] NET: Registered PF_CAN protocol family > [ 2.511597] can: raw protocol > [ 2.511791] can: broadcast manager protocol > [ 2.512029] can: netlink gateway - max_hops=1 > [ 2.512210] 8021q: 802.1Q VLAN Support v1.8 > [ 2.520069] registered taskstats version 1 > [ 2.521401] Loading compiled-in X.509 certificates > [ 2.531388] Demotion targets for Node 0: null > [ 2.532261] Key type .fscrypt registered > [ 2.532350] Key type fscrypt-provisioning registered > [ 2.564198] mmc0: Failed to initialize a non-removable card > [ 2.573543] alg: skcipher: aspeed-ctr-des encryption test failed (wrong > result) on test vector 0, cfg="in-place (one sglist)" > [ 2.573863] alg: self-tests for ctr(des) using aspeed-ctr-des failed > (rc=-22) > [ 2.573938] ------------[ cut here ]------------ > [ 2.574155] alg: self-tests for ctr(des) using aspeed-ctr-des failed > (rc=-22) > [ 2.574401] WARNING: CPU: 3 PID: 116 at > /usr/src/kernel/crypto/testmgr.c:5829 alg_test+0x490/0x5bc > [ 2.574972] Modules linked in: > [ 2.575579] CPU: 3 UID: 0 PID: 116 Comm: cryptomgr_test Not tainted > 6.18.3-v00.08.01-g172b7e27a30d #1 PREEMPT > [ 2.575776] Hardware name: AST2700 EVB (DT) > [ 2.575979] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS > BTYPE=--) > [ 2.576125] pc : alg_test+0x490/0x5bc > [ 2.576215] lr : alg_test+0x490/0x5bc > [ 2.576286] sp : ffff800081f7bd50 > [ 2.576358] x29: ffff800081f7bdf0 x28: 0000000000000004 x27: > ffff800080eaa568 > [ 2.576584] x26: 0000000000000000 x25: 00000000ffffffff x24: > 0000000000000004 > [ 2.576809] x23: ffff0000065d1680 x22: 0000000000001085 x21: > ffff0000065d1600 > [ 2.576981] x20: 00000000ffffffea x19: ffff800080eaa568 x18: > 000000000000000a > [ 2.577104] x17: 32322d3d63722820 x16: 64656c6961662073 x15: > 0000000000000000 > [ 2.577223] x14: 0000000000000000 x13: 00000000ffff0a01 x12: > 00000000ffffffea > [ 2.577345] x11: ffff800081f7bab8 x10: 00000000ffffefff x9 : > ffff8000815ae3c8 > [ 2.577486] x8 : ffff8000815ae420 x7 : 0000000000017fe8 x6 : > c0000000ffffefff > [ 2.577609] x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : > 0000000000000000 > [ 2.577744] x2 : 0000000000000000 x1 : 0000000000000000 x0 : > ffff000006de2400 > [ 2.578021] Call trace: > [ 2.578164] alg_test+0x490/0x5bc (P) > [ 2.578302] cryptomgr_test+0x24/0x44 > [ 2.578384] kthread+0x140/0x220 > [ 2.578455] ret_from_fork+0x10/0x20 > [ 2.578604] ---[ end trace 0000000000000000 ]--- > [ 2.579215] alg: skcipher: aspeed-ctr-tdes encryption test failed (wrong > result) on test vector 0, cfg="in-place (one sglist)" > [ 2.579437] alg: self-tests for ctr(des3_ede) using aspeed-ctr-tdes failed > (rc=-22) > [ 2.579445] ------------[ cut here ]------------ > [ 2.579673] alg: self-tests for ctr(des3_ede) using aspeed-ctr-tdes failed > (rc=-22) > [ 2.580184] WARNING: CPU: 0 PID: 115 at > /usr/src/kernel/crypto/testmgr.c:5829 alg_test+0x490/0x5bc > [ 2.580525] Modules linked in: > [ 2.580726] CPU: 0 UID: 0 PID: 115 Comm: cryptomgr_test Tainted: G > W 6.18.3-v00.08.01-g172b7e27a30d #1 PREEMPT > [ 2.580940] Tainted: [W]=WARN > [ 2.580992] Hardware name: AST2700 EVB (DT) > [ 2.581058] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS > BTYPE=--) > [ 2.581196] pc : alg_test+0x490/0x5bc > [ 2.581261] lr : alg_test+0x490/0x5bc > [ 2.581335] sp : ffff800081f73d50 > [ 2.581392] x29: ffff800081f73df0 x28: 0000000000000004 x27: > ffff800080eaa568 > [ 2.581529] x26: 0000000000000000 x25: 00000000ffffffff x24: > 0000000000000004 > [ 2.581655] x23: ffff0000065d1880 x22: 0000000000001085 x21: > ffff0000065d1800 > [ 2.581781] x20: 00000000ffffffea x19: ffff800080eaa568 x18: > 0000000000000000 > [ 2.581904] x17: 0000000000000000 x16: 00000000e820414d x15: > ffff000006de1290 > [ 2.582027] x14: 00000000000002e0 x13: 0000000000000001 x12: > 0000000000000001 > [ 2.582149] x11: 00000000000000c0 x10: 0000000000000b50 x9 : > ffff800081f73bc0 > [ 2.582281] x8 : ffff000006de1db0 x7 : 0000000000000001 x6 : > 0000000000007a4f > [ 2.582408] x5 : ffff0000054541e0 x4 : ffff000006de1200 x3 : > ffff000006de5a00 > [ 2.582538] x2 : 0000000000000000 x1 : 0000000000000000 x0 : > ffff000006de1200 > [ 2.582670] Call trace: > [ 2.582715] alg_test+0x490/0x5bc (P) > [ 2.582782] cryptomgr_test+0x24/0x44 > [ 2.582856] kthread+0x140/0x220 > [ 2.582921] ret_from_fork+0x10/0x20 > [ 2.582989] ---[ end trace 0000000000000000 ]--- > [ 2.620920] alg: skcipher: aspeed-ctr-aes encryption test failed (wrong > result) on test vector 0, cfg="in-place (one sglist)" > [ 2.621176] alg: self-tests for ctr(aes) using aspeed-ctr-aes failed > (rc=-22) > [ 2.621185] ------------[ cut here ]------------ > [ 2.621384] alg: self-tests for ctr(aes) using aspeed-ctr-aes failed > (rc=-22) > [ 2.621420] WARNING: CPU: 0 PID: 117 at > /usr/src/kernel/crypto/testmgr.c:5829 alg_test+0x490/0x5bc > [ 2.621673] Modules linked in: > [ 2.621738] CPU: 0 UID: 0 PID: 117 Comm: cryptomgr_test Tainted: G > W 6.18.3-v00.08.01-g172b7e27a30d #1 PREEMPT > [ 2.621925] Tainted: [W]=WARN > [ 2.621975] Hardware name: AST2700 EVB (DT) > [ 2.622044] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS > BTYPE=--) > [ 2.622153] pc : alg_test+0x490/0x5bc > [ 2.622218] lr : alg_test+0x490/0x5bc > [ 2.622283] sp : ffff800081f83d50 > [ 2.622337] x29: ffff800081f83df0 x28: 0000000000000004 x27: > ffff800080eaa568 > [ 2.622458] x26: 0000000000000000 x25: 00000000ffffffff x24: > 0000000000000004 > [ 2.622578] x23: ffff0000065d0e80 x22: 0000000000001085 x21: > ffff0000065d0e00 > [ 2.622694] x20: 00000000ffffffea x19: ffff800080eaa568 x18: > 000000000000000a > [ 2.622811] x17: 32322d3d63722820 x16: 64656c6961662073 x15: > 0000000000000000 > [ 2.622931] x14: 0000000000000000 x13: 00000000ffff0a01 x12: > 00000000ffffffea > [ 2.623061] x11: ffff800081f83ab8 x10: 00000000ffffefff x9 : > ffff8000815ae3c8 > [ 2.623200] x8 : ffff8000815ae420 x7 : 0000000000017fe8 x6 : > c0000000ffffefff > [ 2.623325] x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : > 0000000000000000 > [ 2.623447] x2 : 0000000000000000 x1 : 0000000000000000 x0 : > ffff000006de3600 > [ 2.623570] Call trace: > [ 2.623625] alg_test+0x490/0x5bc (P) > [ 2.623690] cryptomgr_test+0x24/0x44 > [ 2.623752] kthread+0x140/0x220 > [ 2.623810] ret_from_fork+0x10/0x20 > [ 2.623875] ---[ end trace 0000000000000000 ]--- > [ 2.653308] aspeed_mbox_client 431880000.mbox-bootmcu-1: TX shmem: > phys 0x0x0000000431880000 size 1048576 > [ 2.653484] aspeed_mbox_client 431880000.mbox-bootmcu-1: RX shmem: > phys 0x0x0000000431980000 size 1048576 > [ 2.653616] aspeed_mbox_client 431880000.mbox-bootmcu-1: TX timeout: > 10000 ms
