Hi Cédric
> Subject: Re: [PATCH v1 1/5] hw/misc/aspeed_acry: Add ASPEED ACRY model
>
> On 8/13/26 08:24, Jamin Lin wrote:
> > Introduce a ASPEED ACRY model, which performs RSA modular
> > exponentiation. The datasheet documents the engine as supporting both
> > RSA and ECDSA, but ECDSA is broken on this hardware, so only RSA is
> > modelled.
> >
> > The engine DMAs its operands (data, exponent, modulus) from a guest
> > DRAM buffer and writes the result back into a memory-mapped SRAM
> > region. Both regions share the same interleaved byte/dword layout:
> > repeating 12-dword blocks of [4 dwords exponent][4 dwords modulus][4
> > dwords data], index 0 holding the least-significant word/byte of each
> > value.
> >
> > The engine accesses DRAM by relative offset, so the CPU-visible
> > address written to the DMA source register has its top (base) bit
> > masked off.
> >
> > The modular exponentiation itself is delegated to QEMU's generic
> > akcipher crypto API (crypto/akcipher.c) using raw (unpadded) RSA,
> > matching what the real hardware performs - PKCS1 padding is handled by
> > the guest's software crypto stack, not by this engine.
> >
> > The RSA public-key operand DER encoding needed by that API is built
> > with crypto/der.h's generic encoder. Raw (unpadded) RSA is only
> > implemented by that API's libgcrypt backend (its nettle backend
> > rejects raw padding), so this device needs QEMU built with --enable-gcrypt.
> >
> > When that support is missing, the engine still completes and raises
> > its completion IRQ as real hardware would, but produces an all-zero
> > result so that whatever signature check the guest performs on it fails
> > cleanly instead of the guest hanging forever waiting for an interrupt
> > that would otherwise never come.
> >
> > Signed-off-by: Jamin Lin <[email protected]>
> > ---
> > include/hw/misc/aspeed_acry.h | 50 ++++
> > hw/misc/aspeed_acry.c | 447
> ++++++++++++++++++++++++++++++++++
> > hw/misc/meson.build | 1 +
> > hw/misc/trace-events | 6 +
> > 4 files changed, 504 insertions(+)
> > create mode 100644 include/hw/misc/aspeed_acry.h
> > create mode 100644 hw/misc/aspeed_acry.c
> >
> > diff --git a/include/hw/misc/aspeed_acry.h
> > b/include/hw/misc/aspeed_acry.h new file mode 100644 index
> > 0000000000..5af2296830
> > --- /dev/null
> > +++ b/include/hw/misc/aspeed_acry.h
> > @@ -0,0 +1,50 @@
> > +/*
> > + * ASPEED ACRY Engine
> > + *
> > + * Copyright (C) 2026 ASPEED Technology Inc.
> > + *
> > + * SPDX-License-Identifier: GPL-2.0-or-later */
> > +
> > +#ifndef ASPEED_ACRY_H
> > +#define ASPEED_ACRY_H
> > +
> > +#include "hw/core/sysbus.h"
> > +#include "system/memory.h"
> > +
> > +#define TYPE_ASPEED_ACRY "aspeed.acry"
> > +OBJECT_DECLARE_SIMPLE_TYPE(AspeedACRYState, ASPEED_ACRY)
> > +
> > +#define ASPEED_ACRY_NR_REGS (0x400 >> 2)
> > +/* Max size of the "data" (message) field within the SRAM buffer. */
> > +#define ASPEED_ACRY_DATA_MAX_LEN 0x800
> > +#define ASPEED_ACRY_MAX_BITS 4096
> > +/* Max exponent/modulus size for a 4096-bit RSA key, in bytes. */
> > +#define ASPEED_ACRY_MAX_BYTES (ASPEED_ACRY_MAX_BITS / 8)
> > +
> > +struct AspeedACRYState {
> > + SysBusDevice parent_obj;
> > +
> > + MemoryRegion iomem;
> > + qemu_irq irq;
> > +
> > + uint32_t regs[ASPEED_ACRY_NR_REGS];
> > +
> > + /*
> > + * Byte-position lookup tables: exp_map[k] / mod_map[k] /
> data_map[k]
> > + * give the offset in the scattered buffer of byte k (k = 0 =
> > + * least significant) of the exponent / modulus / data.
> > + */
> > + uint32_t exp_map[ASPEED_ACRY_MAX_BYTES];
> > + uint32_t mod_map[ASPEED_ACRY_MAX_BYTES];
> > + uint32_t data_map[ASPEED_ACRY_DATA_MAX_LEN];
> > +
> > + MemoryRegion *dram_mr;
> > + AddressSpace dram_as;
> > +
> > + MemoryRegion *sram_mr;
> > + AddressSpace sram_as;
> > + uint64_t sram_base;
>
> A device model should not know its mapping address.
>
> I think sram[1] should be wrapped in a container MR at offset 0 and mapped at
> the physical address. With that the device can use relative offsets.
>
> Look at the DRAM dram_container in aspeed_soc_common.c for this.
>
Thanks for the review and suggestions.
Will do.
>
>
> > +};
> > +
> > +#endif /* ASPEED_ACRY_H */
> > diff --git a/hw/misc/aspeed_acry.c b/hw/misc/aspeed_acry.c new file
> > mode 100644 index 0000000000..53ef68d284
> > --- /dev/null
> > +++ b/hw/misc/aspeed_acry.c
> > @@ -0,0 +1,447 @@
> > +/*
> > + * ASPEED ACRY Engine
> > + *
> > + * Copyright (C) 2026 ASPEED Technology Inc.
> > + *
> > + * SPDX-License-Identifier: GPL-2.0-or-later
> > + *
> > + * The datasheet documents the ACRY engine as supporting both RSA and
> > + * ECDSA, but ECDSA is broken on this hardware, so only RSA is
> > +modelled
> > + * here.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "qemu/cutils.h"
> > +#include "qemu/log.h"
> > +#include "hw/misc/aspeed_acry.h"
> > +#include "hw/core/qdev-properties.h"
> > +#include "hw/core/irq.h"
> > +#include "hw/core/registerfields.h"
> > +#include "qapi/error.h"
> > +#include "crypto/akcipher.h"
> > +#include "crypto/der.h"
> > +#include "trace.h"
> > +
> > +REG32(ACRY_TRIGGER, 0x000)
> > + FIELD(ACRY_TRIGGER, RSA_DMA_DATA, 1, 1)
> > + FIELD(ACRY_TRIGGER, RSA_START, 0, 1) REG32(ACRY_DMA_CMD,
> 0x048)
> > +REG32(ACRY_DMA_SRC, 0x04C) REG32(ACRY_DMA_LEN, 0x050)
> > +REG32(ACRY_RSA_KEY_LEN, 0x058) REG32(ACRY_INT_MASK, 0x3F8)
> > + FIELD(ACRY_INT_MASK, RSA_DMA_MASK, 2, 1)
> > + FIELD(ACRY_INT_MASK, RSA_ENG_MASK, 1, 1) REG32(ACRY_STATUS,
> > +0x3FC)
> > + FIELD(ACRY_STATUS, RSA_DMA_DONE, 2, 1)
> > + FIELD(ACRY_STATUS, RSA_ENG_DONE, 1, 1)
> > +
> > +/*
> > + * Total size of the interleaved SRAM buffer. Data is 4 of every 12
> > + * dwords of a block (see aspeed_acry_init_mapping()), i.e. one third of
> > + * the buffer, so the whole buffer is 3x the data region.
> > + */
> > +#define ASPEED_ACRY_SRAM_SIZE (3 * ASPEED_ACRY_DATA_MAX_LEN)
> > +
> > +static void aspeed_acry_hexdump(const char *desc, const uint8_t *buf,
> > + size_t size)
> > +{
> > + g_autoptr(GString) str = g_string_sized_new(64);
> > + size_t len;
> > + size_t i;
> > +
> > + for (i = 0; i < size; i += len) {
> > + len = MIN(16, size - i);
> > + g_string_truncate(str, 0);
> > + qemu_hexdump_line(str, buf + i, len, 1, 4);
> > + trace_aspeed_acry_hexdump(desc, i, str->str);
> > + }
> > +}
> > +
> > +/*
> > + * The SRAM buffer is a series of 12-dword blocks, each split into
> > + * three 4-dword regions - exp, mod, data:
> > + *
> > + * dword in block: 0 1 2 3 4 5 6 7 8
> 9 10 11
> > + * region: \---- exp ----/ \---- mod ----/ \---- data
> > ----/
> > + * lane: 0 1 2 3 0 1 2 3 0
> 1 2 3
> > + *
> > + * Successive blocks hold the next 4 dwords of each operand, so operand
> > + * dword d is in block (d / 4), lane (d % 4). Dwords are little-endian, so
> > + * byte b of the dword at SRAM dword D is at byte D * 4 + b.
> > + *
> > + * exp_map[op_byte] / mod_map[op_byte] / data_map[op_byte] give the
> buffer
> > + * offset of operand byte op_byte (op_byte = 0 = least significant).
> > + */
> > +static void aspeed_acry_init_mapping(AspeedACRYState *s)
> > +{
> > + int byte_in_dword;
> > + int block_base;
> > + int op_dword;
> > + int op_byte;
> > + int block;
> > + int lane;
> > +
> > + for (op_byte = 0; op_byte < ASPEED_ACRY_DATA_MAX_LEN;
> op_byte++) {
> > + op_dword = op_byte / 4;
> > + byte_in_dword = op_byte % 4;
> > + block = op_dword / 4;
> > + lane = op_dword % 4;
> > + block_base = block * 12;
> > +
> > + /* exp starts each block; mod is +4 dwords, data +8 dwords. */
> > + s->data_map[op_byte] = (block_base + 8 + lane) * 4 +
> byte_in_dword;
> > + if (op_byte < ASPEED_ACRY_MAX_BYTES) {
> > + s->exp_map[op_byte] = (block_base + 0 + lane) * 4 +
> byte_in_dword;
> > + s->mod_map[op_byte] = (block_base + 4 + lane) * 4 +
> byte_in_dword;
> > + }
> > + }
> > +}
>
>
> This is a lot of constant values for each state. Can we build the offsets
> on the fly ?
>
Will do.
>
> > +/*
> > + * Read one operand out of the buffer as a big-endian magnitude.
> > + *
> > + * The operand's bytes are scattered through buf: buf[map[k]] is the byte
> > + * at significance level k (k = 0 is the least significant). Walk from the
> > + * top down, drop leading zero bytes, and write the result most significant
> > + * byte first into out[]. Returns the number of bytes written (the value 0
> > + * yields a single 0x00 byte, so always >= 1).
> > + */
> > +static int aspeed_acry_extract_be(const uint8_t *buf, const uint32_t *map,
> > + int max_bytes, uint8_t *out)
> > +{
> > + int msb;
> > + int len;
> > + int k;
> > +
> > + /* Highest significance level holding a non-zero byte (skip leading
> > 0s).
> */
> > + msb = max_bytes - 1;
> > + while (msb >= 0 && buf[map[msb]] == 0) {
> > + msb--;
> > + }
> > +
> > + /* All bytes zero: the value is 0. */
> > + if (msb < 0) {
> > + out[0] = 0;
> > + return 1;
> > + }
> > +
> > + /* Copy most significant byte first: level msb down to level 0. */
> > + len = 0;
> > + for (k = msb; k >= 0; k--) {
> > + out[len++] = buf[map[k]];
> > + }
> > +
> > + return len;
> > +}
> > +
> > +/*
> > + * Return a DER INTEGER body for the unsigned big-endian magnitude 'be'.
> > + *
> > + * DER INTEGERs are signed, so if the top byte has bit 7 set the value
> > + * would decode as negative; prepend a 0x00 guard byte in that case.
> > + *
> > + * The padded copy is written into 'pad_buf' (caller-owned, sized len + 1)
> > + * rather than a local, because qcrypto_der_encode_int() only stores the
> > + * pointer we hand it - the bytes are not copied until
> > + * qcrypto_der_encode_ctx_flush_and_free() - so the body must stay valid
> > + * until then. Returns a pointer into 'be' or 'pad_buf' as appropriate,
> > + * with the body length in *body_len.
> > + */
> > +static const uint8_t *aspeed_acry_der_uint_body(const uint8_t *be, size_t
> len,
> > + uint8_t
> *pad_buf,
> > + size_t
> *body_len)
> > +{
> > + if (be[0] & 0x80) {
> > + pad_buf[0] = 0x00;
> > + memcpy(pad_buf + 1, be, len);
> > + *body_len = len + 1;
> > + return pad_buf;
> > + }
> > +
> > + *body_len = len;
> > + return be;
> > +}
> > +
> > +/*
> > + * DER-encode a "RsaPubKey ::= SEQUENCE { n INTEGER, e INTEGER }" (see
> > + * crypto/rsakey.h), the format expected by qcrypto_akcipher_new(). n and
> e
> > + * are minimal big-endian magnitudes (as produced by
> > + * aspeed_acry_extract_be()); the engine does a raw modexp, so the guest's
> > + * exponent is always encoded here as the public 'e'.
> > + */
> > +static uint8_t *aspeed_acry_der_encode_pubkey(const uint8_t *n, size_t
> n_len,
> > + const uint8_t *e,
> size_t e_len,
> > + size_t *out_len)
> > +{
> > + QCryptoEncodeContext *ctx = qcrypto_der_encode_ctx_new();
> > + uint8_t n_pad[ASPEED_ACRY_MAX_BYTES + 1];
> > + uint8_t e_pad[ASPEED_ACRY_MAX_BYTES + 1];
> > + const uint8_t *n_body;
> > + const uint8_t *e_body;
> > + size_t n_body_len;
> > + size_t e_body_len;
> > + uint8_t *buf;
> > +
> > + n_body = aspeed_acry_der_uint_body(n, n_len, n_pad, &n_body_len);
> > + e_body = aspeed_acry_der_uint_body(e, e_len, e_pad, &e_body_len);
> > +
> > + qcrypto_der_encode_seq_begin(ctx);
> > + qcrypto_der_encode_int(ctx, n_body, n_body_len);
> > + qcrypto_der_encode_int(ctx, e_body, e_body_len);
> > + qcrypto_der_encode_seq_end(ctx);
> > +
> > + *out_len = qcrypto_der_encode_ctx_buffer_len(ctx);
> > + buf = g_malloc(*out_len);
> > + qcrypto_der_encode_ctx_flush_and_free(ctx, buf);
> > +
> > + return buf;
> > +}
> > +
> > +/*
> > + * Store the RSA result into the output SRAM, scattered through the data
> > + * region via data_map[] (result_be is big-endian; the region above the
> > + * result is zeroed).
> > + *
> > + * data_map[] holds SRAM-relative offsets, but sram_as is an AddressSpace
> > + * over the SoC memory, where the SRAM is mapped at sram_base - so the
> > + * absolute address is sram_base + data_map[k].
> > + */
> > +static void aspeed_acry_store_result(AspeedACRYState *s,
> > + const uint8_t *result_be, int
> result_len)
> > +{
> > + uint8_t value;
> > + int src;
> > + int k;
> > +
> > + /* result_be is MSB-first, so its last byte is the least significant.
> > */
>
> There are address_space store/load be/le helpers which could simplify
> the transactions.
>
Will do.
> > + src = result_len - 1;
> > + for (k = 0; k < ASPEED_ACRY_DATA_MAX_LEN; k++) {
> > + value = 0;
> > + if (src >= 0) {
> > + value = result_be[src--];
> > + }
> > + address_space_write(&s->sram_as, s->sram_base +
> s->data_map[k],
> > + MEMTXATTRS_UNSPECIFIED, &value, 1);
>
> the return value should be tested.
>
Will do.
Thanks,
Jamin
>
> Thanks,
>
> C.
>
>
> > + }
> > +}
> > +
> > +static void aspeed_acry_do_rsa(AspeedACRYState *s)
> > +{
> > + QCryptoAkCipherOptions opts = {
> > + .alg = QCRYPTO_AK_CIPHER_ALGO_RSA,
> > + .u.rsa = {
> > + .padding_alg = QCRYPTO_RSA_PADDING_ALGO_RAW,
> > + },
> > + };
> > + uint8_t result[ASPEED_ACRY_MAX_BYTES] = { 0 };
> > + uint64_t src_addr = s->regs[R_ACRY_DMA_SRC];
> > + uint8_t buf[ASPEED_ACRY_SRAM_SIZE] = { 0 };
> > + uint8_t data[ASPEED_ACRY_DATA_MAX_LEN];
> > + uint32_t len = s->regs[R_ACRY_DMA_LEN];
> > + g_autofree uint8_t *der_key = NULL;
> > + uint8_t n[ASPEED_ACRY_MAX_BYTES];
> > + uint8_t e[ASPEED_ACRY_MAX_BYTES];
> > + QCryptoAkCipher *cipher = NULL;
> > + Error *local_err = NULL;
> > + int result_len = 0;
> > + size_t der_len;
> > + int data_len;
> > + int n_len;
> > + int e_len;
> > +
> > + if (len == 0 || len > ASPEED_ACRY_SRAM_SIZE) {
> > + len = ASPEED_ACRY_SRAM_SIZE;
> > + }
> > +
> > + trace_aspeed_acry_rsa_trigger(src_addr, len);
> > +
> > + if (address_space_read(&s->dram_as, src_addr,
> MEMTXATTRS_UNSPECIFIED,
> > + buf, len) != MEMTX_OK) {
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: failed to read DMA buffer at 0x%" PRIx64
> "\n",
> > + __func__, src_addr);
> > + }
> > +
> > + n_len = aspeed_acry_extract_be(buf, s->mod_map,
> ASPEED_ACRY_MAX_BYTES, n);
> > + e_len = aspeed_acry_extract_be(buf, s->exp_map,
> ASPEED_ACRY_MAX_BYTES, e);
> > + data_len = aspeed_acry_extract_be(buf, s->data_map,
> > +
> ASPEED_ACRY_DATA_MAX_LEN, data);
> > +
> > + if (trace_event_get_state_backends(TRACE_ASPEED_ACRY_HEXDUMP))
> {
> > + aspeed_acry_hexdump("buf", buf, len);
> > + aspeed_acry_hexdump("n", n, n_len);
> > + aspeed_acry_hexdump("e", e, e_len);
> > + aspeed_acry_hexdump("data", data, data_len);
> > + }
> > +
> > + if (!qcrypto_akcipher_supports(&opts)) {
> > + qemu_log_mask(LOG_UNIMP,
> > + "%s: RSA ModExp not supported by the crypto
> backend; "
> > + "completing with an invalid result\n", __func__);
> > + return;
> > + }
> > +
> > + der_key = aspeed_acry_der_encode_pubkey(n, n_len, e, e_len,
> &der_len);
> > + cipher = qcrypto_akcipher_new(&opts,
> QCRYPTO_AK_CIPHER_KEY_TYPE_PUBLIC,
> > + der_key, der_len, &local_err);
> > + if (!cipher) {
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: failed to create RSA cipher: %s\n",
> > + __func__, error_get_pretty(local_err));
> > + error_free(local_err);
> > + } else {
> > + result_len = qcrypto_akcipher_encrypt(cipher, data, data_len,
> > + result,
> sizeof(result),
> > + &local_err);
> > + if (result_len < 0) {
> > + qemu_log_mask(LOG_GUEST_ERROR, "%s: RSA modexp
> failed: %s\n",
> > + __func__, error_get_pretty(local_err));
> > + error_free(local_err);
> > + result_len = 0;
> > + }
> > +
> > + qcrypto_akcipher_free(cipher);
> > + }
> > +
> > + if (trace_event_get_state_backends(TRACE_ASPEED_ACRY_HEXDUMP))
> {
> > + aspeed_acry_hexdump("result", result, result_len);
> > + }
> > +
> > + aspeed_acry_store_result(s, result, result_len);
> > +}
> > +
> > +static uint64_t aspeed_acry_read(void *opaque, hwaddr addr, unsigned int
> size)
> > +{
> > + AspeedACRYState *s = ASPEED_ACRY(opaque);
> > +
> > + addr >>= 2;
> > +
> > + trace_aspeed_acry_read(addr << 2, s->regs[addr]);
> > +
> > + return s->regs[addr];
> > +}
> > +
> > +static void aspeed_acry_write(void *opaque, hwaddr addr, uint64_t data,
> > + unsigned int size)
> > +{
> > + AspeedACRYState *s = ASPEED_ACRY(opaque);
> > +
> > + addr >>= 2;
> > +
> > + trace_aspeed_acry_write(addr << 2, data);
> > +
> > + switch (addr) {
> > + case R_ACRY_DMA_SRC:
> > + /*
> > + * The DMA source register holds a CPU-visible DRAM address
> (e.g.
> > + * 0x8xxxxxxx on AST2600); the engine addresses DRAM from
> offset 0,
> > + * so mask off the top bit to get the DRAM-relative offset.
> > + */
> > + data &= 0x7FFFFFFF;
> > + break;
> > + case R_ACRY_STATUS:
> > + data = s->regs[R_ACRY_STATUS] & ~data;
> > + if (!(data & (R_ACRY_STATUS_RSA_ENG_DONE_MASK |
> > + R_ACRY_STATUS_RSA_DMA_DONE_MASK))) {
> > + qemu_irq_lower(s->irq);
> > + }
> > + break;
> > + case R_ACRY_TRIGGER:
> > + if (FIELD_EX32(data, ACRY_TRIGGER, RSA_START)) {
> > + aspeed_acry_do_rsa(s);
> > +
> > + s->regs[R_ACRY_STATUS] |=
> R_ACRY_STATUS_RSA_ENG_DONE_MASK |
> > +
> R_ACRY_STATUS_RSA_DMA_DONE_MASK;
> > + if (s->regs[R_ACRY_INT_MASK] &
> > + (R_ACRY_INT_MASK_RSA_ENG_MASK_MASK |
> > + R_ACRY_INT_MASK_RSA_DMA_MASK_MASK)) {
> > + qemu_irq_raise(s->irq);
> > + }
> > + }
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + s->regs[addr] = data;
> > +}
> > +
> > +static const MemoryRegionOps aspeed_acry_ops = {
> > + .read = aspeed_acry_read,
> > + .write = aspeed_acry_write,
> > + .endianness = DEVICE_LITTLE_ENDIAN,
> > + .valid = {
> > + .min_access_size = 1,
> > + .max_access_size = 4,
> > + },
> > +};
> > +
> > +static void aspeed_acry_reset_hold(Object *obj, ResetType type)
> > +{
> > + AspeedACRYState *s = ASPEED_ACRY(obj);
> > +
> > + memset(s->regs, 0, sizeof(s->regs));
> > +}
> > +
> > +static void aspeed_acry_instance_init(Object *obj)
> > +{
> > + AspeedACRYState *s = ASPEED_ACRY(obj);
> > +
> > + aspeed_acry_init_mapping(s);
> > +}
> > +
> > +static void aspeed_acry_realize(DeviceState *dev, Error **errp)
> > +{
> > + SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> > + AspeedACRYState *s = ASPEED_ACRY(dev);
> > +
> > + sysbus_init_irq(sbd, &s->irq);
> > +
> > + memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_acry_ops, s,
> > + TYPE_ASPEED_ACRY,
> ASPEED_ACRY_NR_REGS << 2);
> > + sysbus_init_mmio(sbd, &s->iomem);
> > +
> > + if (!s->dram_mr) {
> > + error_setg(errp, TYPE_ASPEED_ACRY ": 'dram' link not set");
> > + return;
> > + }
> > + address_space_init(&s->dram_as, s->dram_mr, "dram");
> > +
> > + if (!s->sram_mr) {
> > + error_setg(errp, TYPE_ASPEED_ACRY ": 'sram' link not set");
> > + return;
> > + }
> > + address_space_init(&s->sram_as, s->sram_mr, "sram");
> > +}
> > +
> > +static const Property aspeed_acry_properties[] = {
> > + DEFINE_PROP_LINK("dram", AspeedACRYState, dram_mr,
> > + TYPE_MEMORY_REGION, MemoryRegion *),
> > + DEFINE_PROP_LINK("sram", AspeedACRYState, sram_mr,
> > + TYPE_MEMORY_REGION, MemoryRegion *),
> > + DEFINE_PROP_UINT64("sram-base", AspeedACRYState, sram_base, 0),
> > +};
> > +
> > +static void aspeed_acry_class_init(ObjectClass *klass, const void *data)
> > +{
> > + DeviceClass *dc = DEVICE_CLASS(klass);
> > + ResettableClass *rc = RESETTABLE_CLASS(klass);
> > +
> > + dc->desc = "ASPEED ACRY Engine";
> > + dc->realize = aspeed_acry_realize;
> > + rc->phases.hold = aspeed_acry_reset_hold;
> > + device_class_set_props(dc, aspeed_acry_properties);
> > +}
> > +
> > +static const TypeInfo aspeed_acry_types[] = {
> > + {
> > + .name = TYPE_ASPEED_ACRY,
> > + .parent = TYPE_SYS_BUS_DEVICE,
> > + .instance_size = sizeof(AspeedACRYState),
> > + .instance_init = aspeed_acry_instance_init,
> > + .class_init = aspeed_acry_class_init,
> > + },
> > +};
> > +
> > +DEFINE_TYPES(aspeed_acry_types)
> > diff --git a/hw/misc/meson.build b/hw/misc/meson.build
> > index e86d9ad6b3..3912dc2bce 100644
> > --- a/hw/misc/meson.build
> > +++ b/hw/misc/meson.build
> > @@ -137,6 +137,7 @@ system_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true:
> files('pvpanic-pci.c'))
> > system_ss.add(when: 'CONFIG_PVPANIC_MMIO', if_true:
> files('pvpanic-mmio.c'))
> > system_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c'))
> > system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
> > + 'aspeed_acry.c',
> > 'aspeed_hace.c',
> > 'aspeed_lpc.c',
> > 'aspeed_ltpi.c',
> > diff --git a/hw/misc/trace-events b/hw/misc/trace-events
> > index c9a868b3ef..bbec0d2178 100644
> > --- a/hw/misc/trace-events
> > +++ b/hw/misc/trace-events
> > @@ -331,6 +331,12 @@ aspeed_peci_read(uint64_t offset, uint64_t data)
> "offset 0x%" PRIx64 " data 0x%"
> > aspeed_peci_write(uint64_t offset, uint64_t data) "offset 0x%" PRIx64 "
> data 0x%" PRIx64
> > aspeed_peci_raise_interrupt(uint32_t ctrl, uint32_t status) "ctrl 0x%"
> PRIx32 " status 0x%" PRIx32
> >
> > +# aspeed_acry.c
> > +aspeed_acry_read(uint64_t offset, uint64_t data) "offset 0x%" PRIx64 " data
> 0x%" PRIx64
> > +aspeed_acry_write(uint64_t offset, uint64_t data) "offset 0x%" PRIx64 "
> data 0x%" PRIx64
> > +aspeed_acry_rsa_trigger(uint64_t src_addr, uint32_t len) "src_addr 0x%"
> PRIx64 " len 0x%" PRIx32
> > +aspeed_acry_hexdump(const char *desc, uint32_t offset, const char *s) "%s:
> 0x%08x: %s"
> > +
> > # aspeed_hace.c
> > aspeed_hace_read(uint64_t offset, uint64_t data) "offset 0x%" PRIx64 "
> data 0x%" PRIx64
> > aspeed_hace_write(uint64_t offset, uint64_t data) "offset 0x%" PRIx64 "
> data 0x%" PRIx64
