On Wed, 2012-11-28 at 16:32 +0000, Krishna J wrote: > Hi Alex, > I am trying to pass through a PCI device to the guest to compare the > MSI interrupt latency with normal device pass through and pass through > using VFIO framework. I used the following script > > for dev in $(ls /sys/bus/pci/devices/0000:06:00.0/iommu_group/devices); do > vendor=$(cat /sys/bus/pci/devices/$dev/vendor) > device=$(cat /sys/bus/pci/devices/$dev/device) > if [ -e /sys/bus/pci/devices/$dev/driver ]; then > echo $dev > /sys/bus/pci/devices/$dev/driver/unbind > fi > echo $vendor $device > /sys/bus/pci/drivers/vfio-pci/new_id > done > > and added "-device vfio-pci,host,host=0000:06:00.0" to my qemu command line. ^^^^^
> I am getting Error - qemu-system-x86_64: -device > vfio-pci,host,host=0000:06:00.0: Property 'vfio-pci.host' doesn't take > value 'on'-- when i use the qemu for your git repo and and also the > latest v1.3.0-rc1 qemu. I am using Kernel 3.6.7-rt18. Am i missing > step ? Hi Krishna, There's an extra "host," in the option above, is that the problem? Please let me know if I've mis-documented it anywhere. I hope you can share your results when you get it working. Thanks, Alex