On Wed, 2013-10-02 at 15:54 +0300, Michael S. Tsirkin wrote: > On Wed, Oct 02, 2013 at 03:41:27PM +0300, Marcel Apfelbaum wrote: > > Interrupt pin is selected and saved into PCI_INTERRUPT_PIN > > register during device initialization. Devices should not call > > directly qemu_set_irq and specify the INTx pin on each call. > > > > Added pci_* wrappers to replace qemu_set_irq, qemu_irq_raise, > > qemu_irq_lower and qemu_irq_pulse, setting the irq > > based on PCI_INTERRUPT_PIN. > > > > Added pci_allocate_irq wrapper to be used by devices that > > still need PCIDevice infrastructure to assert irqs. > > > > Renamed a static method which was named already pci_set_irq. > > > > Signed-off-by: Marcel Apfelbaum <marce...@redhat.com> > > --- > > Changes from v1: > > - Added pci irq wrappers for all qemu methods > > setting irq and not only qemu_set_irq > > - Added pci wrappers to allocate and pci irq > > > > hw/pci/pci.c | 26 ++++++++++++++++++++++---- > > include/hw/pci/pci.h | 19 +++++++++++++++++++ > > 2 files changed, 41 insertions(+), 4 deletions(-) > > > > diff --git a/hw/pci/pci.c b/hw/pci/pci.c > > index 00554a0..fbfd8f7 100644 > > --- a/hw/pci/pci.c > > +++ b/hw/pci/pci.c > > @@ -83,7 +83,7 @@ static const TypeInfo pcie_bus_info = { > > > > static PCIBus *pci_find_bus_nr(PCIBus *bus, int bus_num); > > static void pci_update_mappings(PCIDevice *d); > > -static void pci_set_irq(void *opaque, int irq_num, int level); > > +static void pci_irq_handler(void *opaque, int irq_num, int level); > > static int pci_add_option_rom(PCIDevice *pdev, bool is_default_rom); > > static void pci_del_option_rom(PCIDevice *pdev); > > > > @@ -161,7 +161,7 @@ void pci_device_deassert_intx(PCIDevice *dev) > > { > > int i; > > for (i = 0; i < PCI_NUM_PINS; ++i) { > > - qemu_set_irq(dev->irq[i], 0); > > + pci_irq_handler(dev, i, 0); > > } > > } > > > > @@ -863,7 +863,7 @@ static PCIDevice *do_pci_register_device(PCIDevice > > *pci_dev, PCIBus *bus, > > pci_dev->config_read = config_read; > > pci_dev->config_write = config_write; > > bus->devices[devfn] = pci_dev; > > - pci_dev->irq = qemu_allocate_irqs(pci_set_irq, pci_dev, PCI_NUM_PINS); > > + pci_dev->irq = qemu_allocate_irqs(pci_irq_handler, pci_dev, > > PCI_NUM_PINS); > > pci_dev->version_id = 2; /* Current pci device vmstate version */ > > return pci_dev; > > } > > @@ -1175,7 +1175,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t > > addr, uint32_t val, int l) > > /* generic PCI irq support */ > > > > /* 0 <= irq_num <= 3. level must be 0 or 1 */ > > -static void pci_set_irq(void *opaque, int irq_num, int level) > > +static void pci_irq_handler(void *opaque, int irq_num, int level) > > { > > PCIDevice *pci_dev = opaque; > > int change; > > @@ -1191,6 +1191,24 @@ static void pci_set_irq(void *opaque, int irq_num, > > int level) > > pci_change_irq_level(pci_dev, irq_num, change); > > } > > > > +static inline int pci_intx(PCIDevice *pci_dev) > > +{ > > + return pci_get_byte(pci_dev->config + PCI_INTERRUPT_PIN) - 1; > > +} > > + > > +qemu_irq pci_allocate_irq(PCIDevice *pci_dev) > > +{ > > + int intx = pci_intx(pci_dev); > > + > > + return qemu_allocate_irq(pci_irq_handler, pci_dev, intx); > > +} > > + > > +void pci_set_irq(PCIDevice *pci_dev, int level) > > +{ > > + int intx = pci_intx(pci_dev); > > + pci_irq_handler(pci_dev, intx, level); > > +} > > + > > /* Special hooks used by device assignment */ > > void pci_bus_set_route_irq_fn(PCIBus *bus, pci_route_irq_fn > > route_intx_to_irq) > > { > > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h > > index 4b90e5d..df7d316 100644 > > --- a/include/hw/pci/pci.h > > +++ b/include/hw/pci/pci.h > > @@ -632,6 +632,25 @@ PCIDevice *pci_create_simple_multifunction(PCIBus > > *bus, int devfn, > > PCIDevice *pci_create(PCIBus *bus, int devfn, const char *name); > > PCIDevice *pci_create_simple(PCIBus *bus, int devfn, const char *name); > > > > +qemu_irq pci_allocate_irq(PCIDevice *pci_dev); > > +void pci_set_irq(PCIDevice *pci_dev, int level); > > + > > +static inline void pci_irq_raise(PCIDevice *pci_dev) > > +{ > > + pci_set_irq(pci_dev, 1); > > +} > > + > > +static inline void pci_irq_lower(PCIDevice *pci_dev) > > +{ > > + pci_set_irq(pci_dev, 0); > > +} > > + > > I'd like to add that any users of pci_irq_pulse > are immediately suspect. PCI does not work this way. > If you resend this, maybe add a comment that all users > of this should be fixed. Sure, thanks! Marcel
> > > +static inline void pci_irq_pulse(PCIDevice *pci_dev) > > +{ > > + pci_irq_lower(pci_dev); > > + pci_irq_raise(pci_dev); > > +} > > + > > static inline int pci_is_express(const PCIDevice *d) > > { > > return d->cap_present & QEMU_PCI_CAP_EXPRESS; > > -- > > 1.8.3.1