From: Pavel Pisa <p...@cmp.felk.cvut.cz> The core SJA1000 support is independent of following patches which map SJA1000 chip to PCI boards.
The work is based on Jin Yang GSoC 2013 work funded by Google and mentored in frame of RTEMS project GSoC slot donated to QEMU. Rewritten for QEMU-2.0+ versions and architecture cleanup by Pavel Pisa (Czech Technical University in Prague). Signed-off-by: Pavel Pisa <p...@cmp.felk.cvut.cz> --- default-configs/pci.mak | 1 + hw/can/Makefile.objs | 1 + hw/can/can_sja1000.c | 1013 +++++++++++++++++++++++++++++++++++++++++++++++ hw/can/can_sja1000.h | 167 ++++++++ 4 files changed, 1182 insertions(+) create mode 100644 hw/can/can_sja1000.c create mode 100644 hw/can/can_sja1000.h diff --git a/default-configs/pci.mak b/default-configs/pci.mak index bbe11887a1..979b649fe5 100644 --- a/default-configs/pci.mak +++ b/default-configs/pci.mak @@ -32,6 +32,7 @@ CONFIG_SERIAL=y CONFIG_SERIAL_ISA=y CONFIG_SERIAL_PCI=y CONFIG_CAN_CORE=y +CONFIG_CAN_SJA1000=y CONFIG_IPACK=y CONFIG_WDT_IB6300ESB=y CONFIG_PCI_TESTDEV=y diff --git a/hw/can/Makefile.objs b/hw/can/Makefile.objs index f999085f7a..3c4bf3bfc1 100644 --- a/hw/can/Makefile.objs +++ b/hw/can/Makefile.objs @@ -7,4 +7,5 @@ common-obj-y += can_socketcan.o else common-obj-y += can_host_stub.o endif +common-obj-$(CONFIG_CAN_SJA1000) += can_sja1000.o endif diff --git a/hw/can/can_sja1000.c b/hw/can/can_sja1000.c new file mode 100644 index 0000000000..7f7a6ea244 --- /dev/null +++ b/hw/can/can_sja1000.c @@ -0,0 +1,1013 @@ +/* + * CAN device - SJA1000 chip emulation for QEMU + * + * Copyright (c) 2013-2014 Jin Yang + * Copyright (c) 2014-2018 Pavel Pisa + * + * Initial development supported by Google GSoC 2013 from RTEMS project slot + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "chardev/char.h" +#include "hw/hw.h" +#include "can/can_emu.h" + +#include "can_sja1000.h" + +#ifndef DEBUG_FILTER +#define DEBUG_FILTER 0 +#endif /*DEBUG_FILTER*/ + +#ifndef DEBUG_CAN +#define DEBUG_CAN 0 +#endif /*DEBUG_CAN*/ + +#define DPRINTF(fmt, ...) \ + do { \ + if (DEBUG_CAN) { \ + qemu_log("[cansja]: " fmt , ## __VA_ARGS__); \ + } \ + } while (0) + +static void can_sja_software_reset(CanSJA1000State *s) +{ + s->mode &= ~0x31; + s->mode |= 0x01; + s->status_pel &= ~0x37; + s->status_pel |= 0x34; + + s->rxbuf_start = 0x00; + s->rxmsg_cnt = 0x00; + s->rx_cnt = 0x00; +} + +void can_sja_hardware_reset(CanSJA1000State *s) +{ + /* Reset by hardware, p10 */ + s->mode = 0x01; + s->status_pel = 0x3c; + s->interrupt_pel = 0x00; + s->clock = 0x00; + s->rxbuf_start = 0x00; + s->rxmsg_cnt = 0x00; + s->rx_cnt = 0x00; + + s->control = 0x01; + s->status_bas = 0x0c; + s->interrupt_bas = 0x00; + + s->irq_lower(s->irq_opaque); +} + +static +void can_sja_single_filter(struct qemu_can_filter *filter, + const uint8_t *acr, const uint8_t *amr, int extended) +{ + if (extended) { + filter->can_id = (uint32_t)acr[0] << 21; + filter->can_id |= (uint32_t)acr[1] << 13; + filter->can_id |= (uint32_t)acr[2] << 5; + filter->can_id |= (uint32_t)acr[3] >> 3; + if (acr[3] & 4) { + filter->can_id |= QEMU_CAN_RTR_FLAG; + } + + filter->can_mask = (uint32_t)amr[0] << 21; + filter->can_mask |= (uint32_t)amr[1] << 13; + filter->can_mask |= (uint32_t)amr[2] << 5; + filter->can_mask |= (uint32_t)amr[3] >> 3; + filter->can_mask = ~filter->can_mask & QEMU_CAN_EFF_MASK; + if (!(amr[3] & 4)) { + filter->can_mask |= QEMU_CAN_RTR_FLAG; + } + } else { + filter->can_id = (uint32_t)acr[0] << 3; + filter->can_id |= (uint32_t)acr[1] >> 5; + if (acr[1] & 0x10) { + filter->can_id |= QEMU_CAN_RTR_FLAG; + } + + filter->can_mask = (uint32_t)amr[0] << 3; + filter->can_mask |= (uint32_t)amr[1] << 5; + filter->can_mask = ~filter->can_mask & QEMU_CAN_SFF_MASK; + if (!(amr[1] & 4)) { + filter->can_mask |= QEMU_CAN_RTR_FLAG; + } + } +} + +static +void can_sja_dual_filter(struct qemu_can_filter *filter, + const uint8_t *acr, const uint8_t *amr, int extended) +{ + if (extended) { + filter->can_id = (uint32_t)acr[0] << 21; + filter->can_id |= (uint32_t)acr[1] << 13; + + filter->can_mask = (uint32_t)amr[0] << 21; + filter->can_mask |= (uint32_t)amr[1] << 13; + filter->can_mask = ~filter->can_mask & QEMU_CAN_EFF_MASK & ~0x1fff; + } else { + filter->can_id = (uint32_t)acr[0] << 3; + filter->can_id |= (uint32_t)acr[1] >> 5; + if (acr[1] & 0x10) { + filter->can_id |= QEMU_CAN_RTR_FLAG; + } + + filter->can_mask = (uint32_t)amr[0] << 3; + filter->can_mask |= (uint32_t)amr[1] >> 5; + filter->can_mask = ~filter->can_mask & QEMU_CAN_SFF_MASK; + if (!(amr[1] & 0x10)) { + filter->can_mask |= QEMU_CAN_RTR_FLAG; + } + } +} + +/* Details in DS-p22, what we need to do here is to test the data. */ +static +int can_sja_accept_filter(CanSJA1000State *s, + const qemu_can_frame *frame) +{ + + struct qemu_can_filter filter; + + if (s->clock & 0x80) { /* PeliCAN Mode */ + if (s->mode & (1 << 3)) { /* Single mode. */ + if (frame->can_id & QEMU_CAN_EFF_FLAG) { /* EFF */ + can_sja_single_filter(&filter, + s->code_mask + 0, s->code_mask + 4, 1); + + if (!can_bus_filter_match(&filter, frame->can_id)) { + return 0; + } + } else { /* SFF */ + can_sja_single_filter(&filter, + s->code_mask + 0, s->code_mask + 4, 0); + + if (!can_bus_filter_match(&filter, frame->can_id)) { + return 0; + } + + if (frame->can_id & QEMU_CAN_RTR_FLAG) { /* RTR */ + return 1; + } + + if (frame->can_dlc == 0) { + return 1; + } + + if ((frame->data[0] & ~(s->code_mask[6])) != + (s->code_mask[2] & ~(s->code_mask[6]))) { + return 0; + } + + if (frame->can_dlc < 2) { + return 1; + } + + if ((frame->data[1] & ~(s->code_mask[7])) == + (s->code_mask[3] & ~(s->code_mask[7]))) { + return 1; + } + + return 0; + } + } else { /* Dual mode */ + if (frame->can_id & QEMU_CAN_EFF_FLAG) { /* EFF */ + can_sja_dual_filter(&filter, + s->code_mask + 0, s->code_mask + 4, 1); + + if (can_bus_filter_match(&filter, frame->can_id)) { + return 1; + } + + can_sja_dual_filter(&filter, + s->code_mask + 2, s->code_mask + 6, 1); + + if (can_bus_filter_match(&filter, frame->can_id)) { + return 1; + } + + return 0; + } else { + can_sja_dual_filter(&filter, + s->code_mask + 0, s->code_mask + 4, 0); + + if (can_bus_filter_match(&filter, frame->can_id)) { + uint8_t expect; + uint8_t mask; + expect = s->code_mask[1] << 4; + expect |= s->code_mask[3] & 0x0f; + + mask = s->code_mask[5] << 4; + mask |= s->code_mask[7] & 0x0f; + mask = ~mask & 0xff; + + if ((frame->data[0] & mask) == + (expect & mask)) { + return 1; + } + } + + can_sja_dual_filter(&filter, + s->code_mask + 2, s->code_mask + 6, 0); + + if (can_bus_filter_match(&filter, frame->can_id)) { + return 1; + } + + return 0; + } + } + } + + return 1; +} + +static void can_display_msg(const char *prefix, const qemu_can_frame *msg) +{ + int i; + + qemu_log_lock(); + qemu_log("%s%03X [%01d] %s %s", + prefix, + msg->can_id & QEMU_CAN_EFF_MASK, + msg->can_dlc, + msg->can_id & QEMU_CAN_EFF_FLAG ? "EFF" : "SFF", + msg->can_id & QEMU_CAN_RTR_FLAG ? "RTR" : "DAT"); + + for (i = 0; i < msg->can_dlc; i++) { + qemu_log(" %02X", msg->data[i]); + } + qemu_log("\n"); + qemu_log_flush(); + qemu_log_unlock(); +} + +static void buff2frame_pel(const uint8_t *buff, qemu_can_frame *frame) +{ + uint8_t i; + + frame->can_id = 0; + if (buff[0] & 0x40) { /* RTR */ + frame->can_id = QEMU_CAN_RTR_FLAG; + } + frame->can_dlc = buff[0] & 0x0f; + + if (buff[0] & 0x80) { /* Extended */ + frame->can_id |= QEMU_CAN_EFF_FLAG; + frame->can_id |= buff[1] << 21; /* ID.28~ID.21 */ + frame->can_id |= buff[2] << 13; /* ID.20~ID.13 */ + frame->can_id |= buff[3] << 5; + frame->can_id |= buff[4] >> 3; + for (i = 0; i < frame->can_dlc; i++) { + frame->data[i] = buff[5 + i]; + } + for (; i < 8; i++) { + frame->data[i] = 0; + } + } else { + frame->can_id |= buff[1] << 3; + frame->can_id |= buff[2] >> 5; + for (i = 0; i < frame->can_dlc; i++) { + frame->data[i] = buff[3 + i]; + } + for (; i < 8; i++) { + frame->data[i] = 0; + } + } +} + + +static void buff2frame_bas(const uint8_t *buff, qemu_can_frame *frame) +{ + uint8_t i; + + frame->can_id = ((buff[0] << 3) & (0xff << 3)) + ((buff[1] >> 5) & 0x07); + if (buff[1] & 0x10) { /* RTR */ + frame->can_id = QEMU_CAN_RTR_FLAG; + } + frame->can_dlc = buff[1] & 0x0f; + + for (i = 0; i < frame->can_dlc; i++) { + frame->data[i] = buff[2 + i]; + } + for (; i < 8; i++) { + frame->data[i] = 0; + } +} + + +static int frame2buff_pel(const qemu_can_frame *frame, uint8_t *buff) +{ + int i; + + if (frame->can_id & QEMU_CAN_ERR_FLAG) { /* error frame, NOT support now. */ + return -1; + } + + buff[0] = 0x0f & frame->can_dlc; /* DLC */ + if (frame->can_id & QEMU_CAN_RTR_FLAG) { /* RTR */ + buff[0] |= (1 << 6); + } + if (frame->can_id & QEMU_CAN_EFF_FLAG) { /* EFF */ + buff[0] |= (1 << 7); + buff[1] = extract32(frame->can_id, 21, 8); /* ID.28~ID.21 */ + buff[2] = extract32(frame->can_id, 13, 8); /* ID.20~ID.13 */ + buff[3] = extract32(frame->can_id, 5, 8); /* ID.12~ID.05 */ + buff[4] = extract32(frame->can_id, 0, 5) << 3; /* ID.04~ID.00,xxx */ + for (i = 0; i < frame->can_dlc; i++) { + buff[5 + i] = frame->data[i]; + } + return frame->can_dlc + 5; + } else { /* SFF */ + buff[1] = extract32(frame->can_id, 3, 8); /* ID.10~ID.03 */ + buff[2] = extract32(frame->can_id, 0, 3) << 5; /* ID.02~ID.00,xxxxx */ + for (i = 0; i < frame->can_dlc; i++) { + buff[3 + i] = frame->data[i]; + } + + return frame->can_dlc + 3; + } + + return -1; +} + +static int frame2buff_bas(const qemu_can_frame *frame, uint8_t *buff) +{ + int i; + + /* + * EFF, no support for BasicMode + * No use for Error frames now, + * they could be used in future to update SJA1000 error state + */ + if ((frame->can_id & QEMU_CAN_EFF_FLAG) || + (frame->can_id & QEMU_CAN_ERR_FLAG)) { + return -1; + } + + buff[0] = extract32(frame->can_id, 3, 8); /* ID.10~ID.03 */ + buff[1] = extract32(frame->can_id, 0, 3) << 5; /* ID.02~ID.00,xxxxx */ + if (frame->can_id & QEMU_CAN_RTR_FLAG) { /* RTR */ + buff[1] |= (1 << 4); + } + buff[1] |= frame->can_dlc & 0x0f; + for (i = 0; i < frame->can_dlc; i++) { + buff[2 + i] = frame->data[i]; + } + + return frame->can_dlc + 2; +} + +void can_sja_mem_write(CanSJA1000State *s, hwaddr addr, uint64_t val, + unsigned size) +{ + qemu_can_frame frame; + uint32_t tmp; + uint8_t tmp8, count; + + + DPRINTF("write 0x%02llx addr 0x%02x\n", + (unsigned long long)val, (unsigned int)addr); + + if (addr > CAN_SJA_MEM_SIZE) { + return ; + } + + if (s->clock & 0x80) { /* PeliCAN Mode */ + switch (addr) { + case SJA_MOD: /* Mode register */ + s->mode = 0x1f & val; + if ((s->mode & 0x01) && ((val & 0x01) == 0)) { + /* Go to operation mode from reset mode. */ + if (s->mode & (1 << 3)) { /* Single mode. */ + /* For EFF */ + can_sja_single_filter(&s->filter[0], + s->code_mask + 0, s->code_mask + 4, 1); + + /* For SFF */ + can_sja_single_filter(&s->filter[1], + s->code_mask + 0, s->code_mask + 4, 0); + + can_bus_client_set_filters(&s->bus_client, s->filter, 2); + } else { /* Dual mode */ + /* For EFF */ + can_sja_dual_filter(&s->filter[0], + s->code_mask + 0, s->code_mask + 4, 1); + + can_sja_dual_filter(&s->filter[1], + s->code_mask + 2, s->code_mask + 6, 1); + + /* For SFF */ + can_sja_dual_filter(&s->filter[2], + s->code_mask + 0, s->code_mask + 4, 0); + + can_sja_dual_filter(&s->filter[3], + s->code_mask + 2, s->code_mask + 6, 0); + + can_bus_client_set_filters(&s->bus_client, s->filter, 4); + } + + s->rxmsg_cnt = 0; + s->rx_cnt = 0; + } + break; + + case SJA_CMR: /* Command register. */ + if (0x01 & val) { /* Send transmission request. */ + buff2frame_pel(s->tx_buff, &frame); + if (DEBUG_FILTER) { + can_display_msg("[cansja]: Tx request " , &frame); + } + + /* + * Clear transmission complete status, + * and Transmit Buffer Status. + * write to the backends. + */ + s->status_pel &= ~(3 << 2); + + can_bus_client_send(&s->bus_client, &frame, 1); + + /* + * Set transmission complete status + * and Transmit Buffer Status. + */ + s->status_pel |= (3 << 2); + + /* Clear transmit status. */ + s->status_pel &= ~(1 << 5); + s->interrupt_pel |= 0x02; + if (s->interrupt_en & 0x02) { + s->irq_raise(s->irq_opaque); + } + } + if (0x04 & val) { /* Release Receive Buffer */ + if (s->rxmsg_cnt <= 0) { + break; + } + + tmp8 = s->rx_buff[s->rxbuf_start]; count = 0; + if (tmp8 & (1 << 7)) { /* EFF */ + count += 2; + } + count += 3; + if (!(tmp8 & (1 << 6))) { /* DATA */ + count += (tmp8 & 0x0f); + } + + if (DEBUG_FILTER) { + qemu_log("[cansja]: message released from " + "Rx FIFO cnt=%d, count=%d\n", s->rx_cnt, count); + } + + s->rxbuf_start += count; + s->rxbuf_start %= SJA_RCV_BUF_LEN; + + s->rx_cnt -= count; + s->rxmsg_cnt--; + if (s->rxmsg_cnt == 0) { + s->status_pel &= ~(1 << 0); + s->interrupt_pel &= ~(1 << 0); + } + if ((s->interrupt_en & 0x01) && (s->interrupt_pel == 0)) { + /* no other interrupts. */ + s->irq_lower(s->irq_opaque); + } + } + if (0x08 & val) { /* Clear data overrun */ + s->status_pel &= ~(1 << 1); + s->interrupt_pel &= ~(1 << 3); + if ((s->interrupt_en & 0x80) && (s->interrupt_pel == 0)) { + /* no other interrupts. */ + s->irq_lower(s->irq_opaque); + } + } + break; + case SJA_SR: /* Status register */ + case SJA_IR: /* Interrupt register */ + break; /* Do nothing */ + case SJA_IER: /* Interrupt enable register */ + s->interrupt_en = val; + break; + case 16: /* RX frame information addr16-28. */ + s->status_pel |= (1 << 5); /* Set transmit status. */ + case 17: + case 18: + case 19: + case 20: + case 21: + case 22: + case 23: + case 24: + case 25: + case 26: + case 27: + case 28: + if (s->mode & 0x01) { /* Reset mode */ + if (addr < 24) { + s->code_mask[addr - 16] = val; + } + } else { /* Operation mode */ + s->tx_buff[addr - 16] = val; /* Store to TX buffer directly. */ + } + break; + case SJA_CDR: + s->clock = val; + break; + } + } else { /* Basic Mode */ + switch (addr) { + case SJA_BCAN_CTR: /* Control register, addr 0 */ + if ((s->control & 0x01) && ((val & 0x01) == 0)) { + /* Go to operation mode from reset mode. */ + s->filter[0].can_id = (s->code << 3) & (0xff << 3); + tmp = (~(s->mask << 3)) & (0xff << 3); + tmp |= QEMU_CAN_EFF_FLAG; /* Only Basic CAN Frame. */ + s->filter[0].can_mask = tmp; + can_bus_client_set_filters(&s->bus_client, s->filter, 1); + + s->rxmsg_cnt = 0; + s->rx_cnt = 0; + } else if (!(s->control & 0x01) && !(val & 0x01)) { + can_sja_software_reset(s); + } + + s->control = 0x1f & val; + break; + case SJA_BCAN_CMR: /* Command register, addr 1 */ + if (0x01 & val) { /* Send transmission request. */ + buff2frame_bas(s->tx_buff, &frame); + if (DEBUG_FILTER) { + can_display_msg("[cansja]: Tx request " , &frame); + } + + /* + * Clear transmission complete status, + * and Transmit Buffer Status. + */ + s->status_bas &= ~(3 << 2); + + /* write to the backends. */ + can_bus_client_send(&s->bus_client, &frame, 1); + + /* + * Set transmission complete status, + * and Transmit Buffer Status. + */ + s->status_bas |= (3 << 2); + + /* Clear transmit status. */ + s->status_bas &= ~(1 << 5); + s->interrupt_bas |= 0x02; + if (s->control & 0x04) { + s->irq_raise(s->irq_opaque); + } + } + if (0x04 & val) { /* Release Receive Buffer */ + if (s->rxmsg_cnt <= 0) { + break; + } + + qemu_mutex_lock(&s->rx_lock); + tmp8 = s->rx_buff[(s->rxbuf_start + 1) % SJA_RCV_BUF_LEN]; + count = 2 + (tmp8 & 0x0f); + + if (DEBUG_FILTER) { + qemu_log("[cansja]: message released from " + "Rx FIFO cnt=%d, count=%d\n", s->rx_cnt, count); + } + + s->rxbuf_start += count; + s->rxbuf_start %= SJA_RCV_BUF_LEN; + s->rx_cnt -= count; + s->rxmsg_cnt--; + qemu_mutex_unlock(&s->rx_lock); + + if (s->rxmsg_cnt == 0) { + s->status_bas &= ~(1 << 0); + s->interrupt_bas &= ~(1 << 0); + } + if ((s->control & 0x02) && (s->interrupt_bas == 0)) { + /* no other interrupts. */ + s->irq_lower(s->irq_opaque); + } + } + if (0x08 & val) { /* Clear data overrun */ + s->status_bas &= ~(1 << 1); + s->interrupt_bas &= ~(1 << 3); + if ((s->control & 0x10) && (s->interrupt_bas == 0)) { + /* no other interrupts. */ + s->irq_lower(s->irq_opaque); + } + } + break; + case 4: + s->code = val; + break; + case 5: + s->mask = val; + break; + case 10: + s->status_bas |= (1 << 5); /* Set transmit status. */ + case 11: + case 12: + case 13: + case 14: + case 15: + case 16: + case 17: + case 18: + case 19: + if ((s->control & 0x01) == 0) { /* Operation mode */ + s->tx_buff[addr - 10] = val; /* Store to TX buffer directly. */ + } + break; + case SJA_CDR: + s->clock = val; + break; + } + } +} + +uint64_t can_sja_mem_read(CanSJA1000State *s, hwaddr addr, unsigned size) +{ + uint64_t temp = 0; + + DPRINTF("read addr 0x%02x ...\n", (unsigned int)addr); + + if (addr > CAN_SJA_MEM_SIZE) { + return 0; + } + + if (s->clock & 0x80) { /* PeliCAN Mode */ + switch (addr) { + case SJA_MOD: /* Mode register, addr 0 */ + temp = s->mode; + break; + case SJA_CMR: /* Command register, addr 1 */ + temp = 0x00; /* Command register, cannot be read. */ + break; + case SJA_SR: /* Status register, addr 2 */ + temp = s->status_pel; + break; + case SJA_IR: /* Interrupt register, addr 3 */ + temp = s->interrupt_pel; + s->interrupt_pel = 0; + if (s->rxmsg_cnt) { + s->interrupt_pel |= (1 << 0); /* Receive interrupt. */ + break; + } + s->irq_lower(s->irq_opaque); + break; + case SJA_IER: /* Interrupt enable register, addr 4 */ + temp = s->interrupt_en; + break; + case 5: /* Reserved */ + case 6: /* Bus timing 0, hardware related, not support now. */ + case 7: /* Bus timing 1, hardware related, not support now. */ + case 8: /* + * Output control register, hardware related, + * not supported for now. + */ + case 9: /* Test. */ + case 10: /* Reserved */ + case 11: + case 12: + case 13: + case 14: + case 15: + temp = 0x00; + break; + + case 16: + case 17: + case 18: + case 19: + case 20: + case 21: + case 22: + case 23: + case 24: + case 25: + case 26: + case 27: + case 28: + if (s->mode & 0x01) { /* Reset mode */ + if (addr < 24) { + temp = s->code_mask[addr - 16]; + } else { + temp = 0x00; + } + } else { /* Operation mode */ + temp = s->rx_buff[(s->rxbuf_start + addr - 16) % + SJA_RCV_BUF_LEN]; + } + break; + case SJA_CDR: + temp = s->clock; + break; + default: + temp = 0xff; + } + } else { /* Basic Mode */ + switch (addr) { + case SJA_BCAN_CTR: /* Control register, addr 0 */ + temp = s->control; + break; + case SJA_BCAN_SR: /* Status register, addr 2 */ + temp = s->status_bas; + break; + case SJA_BCAN_IR: /* Interrupt register, addr 3 */ + temp = s->interrupt_bas; + s->interrupt_bas = 0; + if (s->rxmsg_cnt) { + s->interrupt_bas |= (1 << 0); /* Receive interrupt. */ + break; + } + s->irq_lower(s->irq_opaque); + break; + case 4: + temp = s->code; + break; + case 5: + temp = s->mask; + break; + case 20: + case 21: + case 22: + case 23: + case 24: + case 25: + case 26: + case 27: + case 28: + case 29: + temp = s->rx_buff[(s->rxbuf_start + addr - 20) % SJA_RCV_BUF_LEN]; + break; + case 31: + temp = s->clock; + break; + default: + temp = 0xff; + break; + } + } + DPRINTF("read addr 0x%02x, %d bytes, content 0x%02lx\n", + (int)addr, size, (long unsigned int)temp); + + return temp; +} + +int can_sja_can_receive(CanBusClientState *client) +{ + CanSJA1000State *s = container_of(client, CanSJA1000State, bus_client); + + if (s->clock & 0x80) { /* PeliCAN Mode */ + if (s->mode & 0x01) { /* reset mode. */ + return 0; + } + } else { /* BasicCAN mode */ + if (s->control & 0x01) { + return 0; + } + } + + return 1; /* always return 1, when operation mode */ +} + +ssize_t can_sja_receive(CanBusClientState *client, const qemu_can_frame *frames, + size_t frames_cnt) +{ + CanSJA1000State *s = container_of(client, CanSJA1000State, bus_client); + static uint8_t rcv[SJA_MSG_MAX_LEN]; + int i; + int ret = -1; + const qemu_can_frame *frame = frames; + + if (frames_cnt <= 0) { + return 0; + } + if (DEBUG_FILTER) { + can_display_msg("[cansja]: receive ", frame); + } + + qemu_mutex_lock(&s->rx_lock); /* Just do it quickly :) */ + if (s->clock & 0x80) { /* PeliCAN Mode */ + + /* the CAN controller is receiving a message */ + s->status_pel |= (1 << 4); + + if (can_sja_accept_filter(s, frame) == 0) { + s->status_pel &= ~(1 << 4); + if (DEBUG_FILTER) { + qemu_log("[cansja]: filter rejects message\n"); + } + goto fail; + } + + ret = frame2buff_pel(frame, rcv); + if (ret < 0) { + s->status_pel &= ~(1 << 4); + if (DEBUG_FILTER) { + qemu_log("[cansja]: message store failed\n"); + } + goto fail; /* maybe not support now. */ + } + + if (s->rx_cnt + ret > SJA_RCV_BUF_LEN) { /* Data overrun. */ + s->status_pel |= (1 << 1); /* Overrun status */ + s->interrupt_pel |= (1 << 3); + if (s->interrupt_en & (1 << 3)) { /* Overrun interrupt enable */ + s->irq_raise(s->irq_opaque); + } + s->status_pel &= ~(1 << 4); + if (DEBUG_FILTER) { + qemu_log("[cansja]: receive FIFO overrun\n"); + } + goto fail; + } + s->rx_cnt += ret; + s->rxmsg_cnt++; + if (DEBUG_FILTER) { + qemu_log("[cansja]: message stored in receive FIFO\n"); + } + + for (i = 0; i < ret; i++) { + s->rx_buff[(s->rx_ptr++) % SJA_RCV_BUF_LEN] = rcv[i]; + } + s->rx_ptr %= SJA_RCV_BUF_LEN; /* update the pointer. */ + + s->status_pel |= 0x01; /* Set the Receive Buffer Status. DS-p23 */ + s->interrupt_pel |= 0x01; + s->status_pel &= ~(1 << 4); + s->status_pel |= (1 << 0); + if (s->interrupt_en & 0x01) { /* Receive Interrupt enable. */ + s->irq_raise(s->irq_opaque); + } + } else { /* BasicCAN mode */ + + /* the CAN controller is receiving a message */ + s->status_bas |= (1 << 4); + + ret = frame2buff_bas(frame, rcv); + if (ret < 0) { + s->status_bas &= ~(1 << 4); + if (DEBUG_FILTER) { + qemu_log("[cansja]: message store failed\n"); + } + goto fail; /* maybe not support now. */ + } + + if (s->rx_cnt + ret > SJA_RCV_BUF_LEN) { /* Data overrun. */ + s->status_bas |= (1 << 1); /* Overrun status */ + s->status_bas &= ~(1 << 4); + s->interrupt_bas |= (1 << 3); + if (s->control & (1 << 4)) { /* Overrun interrupt enable */ + s->irq_raise(s->irq_opaque); + } + if (DEBUG_FILTER) { + qemu_log("[cansja]: receive FIFO overrun\n"); + } + goto fail; + } + s->rx_cnt += ret; + s->rxmsg_cnt++; + + if (DEBUG_FILTER) { + qemu_log("[cansja]: message stored\n"); + } + + for (i = 0; i < ret; i++) { + s->rx_buff[(s->rx_ptr++) % SJA_RCV_BUF_LEN] = rcv[i]; + } + s->rx_ptr %= SJA_RCV_BUF_LEN; /* update the pointer. */ + + s->status_bas |= 0x01; /* Set the Receive Buffer Status. DS-p15 */ + s->status_bas &= ~(1 << 4); + s->interrupt_bas |= 0x01; + if (s->control & 0x02) { /* Receive Interrupt enable. */ + s->irq_raise(s->irq_opaque); + } + } + ret = 1; +fail: + qemu_mutex_unlock(&s->rx_lock); + + return ret; +} + +static CanBusClientInfo can_sja_bus_client_info = { + .can_receive = can_sja_can_receive, + .receive = can_sja_receive, + .cleanup = NULL, + .poll = NULL +}; + + +int can_sja_connect_to_bus(CanSJA1000State *s, CanBusState *bus) +{ + s->bus_client.info = &can_sja_bus_client_info; + + if (can_bus_insert_client(bus, &s->bus_client) < 0) { + return -1; + } + + return 0; +} + +void can_sja_disconnect(CanSJA1000State *s) +{ + can_bus_remove_client(&s->bus_client); +} + +int can_sja_init(CanSJA1000State *s, CanSJAIrqRaiseLower *irq_raise, + CanSJAIrqRaiseLower *irq_lower, void *irq_opaque) +{ + qemu_mutex_init(&s->rx_lock); + + s->irq_raise = irq_raise; + s->irq_lower = irq_lower; + s->irq_opaque = irq_opaque; + + s->irq_lower(s->irq_opaque); + + can_sja_hardware_reset(s); + + return 0; +} + +void can_sja_exit(CanSJA1000State *s) +{ + qemu_mutex_destroy(&s->rx_lock); +} + +const VMStateDescription vmstate_qemu_can_filter = { + .name = "qemu_can_filter", + .version_id = 1, + .minimum_version_id = 1, + .minimum_version_id_old = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(can_id, qemu_can_filter), + VMSTATE_UINT32(can_mask, qemu_can_filter), + VMSTATE_END_OF_LIST() + } +}; + +/* VMState is needed for live migration of QEMU images */ +const VMStateDescription vmstate_can_sja = { + .name = "can_sja", + .version_id = 1, + .minimum_version_id = 1, + .minimum_version_id_old = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8(mode, CanSJA1000State), + + VMSTATE_UINT8(status_pel, CanSJA1000State), + VMSTATE_UINT8(interrupt_pel, CanSJA1000State), + VMSTATE_UINT8(interrupt_en, CanSJA1000State), + VMSTATE_UINT8(rxmsg_cnt, CanSJA1000State), + VMSTATE_UINT8(rxbuf_start, CanSJA1000State), + VMSTATE_UINT8(clock, CanSJA1000State), + + VMSTATE_BUFFER(code_mask, CanSJA1000State), + VMSTATE_BUFFER(tx_buff, CanSJA1000State), + + VMSTATE_BUFFER(rx_buff, CanSJA1000State), + + VMSTATE_UINT32(rx_ptr, CanSJA1000State), + VMSTATE_UINT32(rx_cnt, CanSJA1000State), + + VMSTATE_UINT8(control, CanSJA1000State), + + VMSTATE_UINT8(status_bas, CanSJA1000State), + VMSTATE_UINT8(interrupt_bas, CanSJA1000State), + VMSTATE_UINT8(code, CanSJA1000State), + VMSTATE_UINT8(mask, CanSJA1000State), + + VMSTATE_STRUCT_ARRAY(filter, CanSJA1000State, 4, 0, + vmstate_qemu_can_filter, qemu_can_filter), + + + VMSTATE_END_OF_LIST() + } +}; diff --git a/hw/can/can_sja1000.h b/hw/can/can_sja1000.h new file mode 100644 index 0000000000..6f2cfbcb72 --- /dev/null +++ b/hw/can/can_sja1000.h @@ -0,0 +1,167 @@ +/* + * CAN device - SJA1000 chip emulation for QEMU + * + * Copyright (c) 2013-2014 Jin Yang + * Copyright (c) 2014-2018 Pavel Pisa + * + * Initial development supported by Google GSoC 2013 from RTEMS project slot + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#ifndef HW_CAN_SJA1000_H +#define HW_CAN_SJA1000_H + +#include "can/can_emu.h" + +#define CAN_SJA_MEM_SIZE 128 + +/* The max size for a message buffer, EFF and DLC=8, DS-p39 */ +#define SJA_MSG_MAX_LEN 13 +/* The receive buffer size. */ +#define SJA_RCV_BUF_LEN 64 + +typedef void (CanSJAIrqRaiseLower)(void *opaque); + +typedef struct CanSJA1000State { + /* PeliCAN state and registers sorted by address */ + uint8_t mode; /* 0 .. Mode register, DS-p26 */ + /* 1 .. Command register */ + uint8_t status_pel; /* 2 .. Status register, p15 */ + uint8_t interrupt_pel; /* 3 .. Interrupt register */ + uint8_t interrupt_en; /* 4 .. Interrupt Enable register */ + uint8_t rxmsg_cnt; /* 29 .. RX message counter. DS-p49 */ + uint8_t rxbuf_start; /* 30 .. RX buffer start address, DS-p49 */ + uint8_t clock; /* 31 .. Clock Divider register, DS-p55 */ + + uint8_t code_mask[8]; /* 16~23 */ + uint8_t tx_buff[13]; /* 96~108 .. transmit buffer */ + /* 10~19 .. transmit buffer for BasicCAN */ + + uint8_t rx_buff[SJA_RCV_BUF_LEN]; /* 32~95 .. 64bytes Rx FIFO */ + uint32_t rx_ptr; /* Count by bytes. */ + uint32_t rx_cnt; /* Count by bytes. */ + + /* PeliCAN state and registers sorted by address */ + uint8_t control; /* 0 .. Control register */ + /* 1 .. Command register */ + uint8_t status_bas; /* 2 .. Status register */ + uint8_t interrupt_bas; /* 3 .. Interrupt register */ + uint8_t code; /* 4 .. Acceptance code register */ + uint8_t mask; /* 5 .. Acceptance mask register */ + + qemu_can_filter filter[4]; + + QemuMutex rx_lock; + CanSJAIrqRaiseLower *irq_raise; + CanSJAIrqRaiseLower *irq_lower; + void *irq_opaque; + CanBusClientState bus_client; +} CanSJA1000State; + +/* PeliCAN mode */ +enum SJA1000_PeliCAN_regs { + SJA_MOD = 0x00, +/* Command register */ + SJA_CMR = 0x01, +/* Status register */ + SJA_SR = 0x02, +/* Interrupt register */ + SJA_IR = 0x03, +/* Interrupt Enable */ + SJA_IER = 0x04, +/* Bus Timing register 0 */ + SJA_BTR0 = 0x06, +/* Bus Timing register 1 */ + SJA_BTR1 = 0x07, +/* Output Control register */ + SJA_OCR = 0x08, +/* Arbitration Lost Capture */ + SJA_ALC = 0x0b, +/* Error Code Capture */ + SJA_ECC = 0x0c, +/* Error Warning Limit */ + SJA_EWLR = 0x0d, +/* RX Error Counter */ + SJA_RXERR = 0x0e, +/* TX Error Counter */ + SJA_TXERR0 = 0x0e, + SJA_TXERR1 = 0x0f, +/* Rx Message Counter (number of msgs. in RX FIFO */ + SJA_RMC = 0x1d, +/* Rx Buffer Start Addr. (address of current MSG) */ + SJA_RBSA = 0x1e, +/* Transmit Buffer (write) Receive Buffer (read) Frame Information */ + SJA_FRM = 0x10, +/* + * ID bytes (11 bits in 0 and 1 for standard message or + * 16 bits in 0,1 and 13 bits in 2,3 for extended message) + */ + SJA_ID0 = 0x11, SJA_ID1 = 0x12, +/* ID cont. for extended frames */ + SJA_ID2 = 0x13, SJA_ID3 = 0x14, +/* Data start standard frame */ + SJA_DATS = 0x13, +/* Data start extended frame */ + SJA_DATE = 0x15, +/* Acceptance Code (4 bytes) in RESET mode */ + SJA_ACR0 = 0x10, +/* Acceptance Mask (4 bytes) in RESET mode */ + SJA_AMR0 = 0x14, +/* 4 bytes */ + SJA_PeliCAN_AC_LEN = 4, +/* Clock Divider */ + SJA_CDR = 0x1f +}; + + +/* PeliCAN mode */ +enum SJA1000_BasicCAN_regs { + SJA_BCAN_CTR = 0x00, +/* Command register */ + SJA_BCAN_CMR = 0x01, +/* Status register */ + SJA_BCAN_SR = 0x02, +/* Interrupt register */ + SJA_BCAN_IR = 0x03 +}; + +void can_sja_hardware_reset(CanSJA1000State *s); + +void can_sja_mem_write(CanSJA1000State *s, hwaddr addr, uint64_t val, + unsigned size); + +uint64_t can_sja_mem_read(CanSJA1000State *s, hwaddr addr, unsigned size); + +int can_sja_connect_to_bus(CanSJA1000State *s, CanBusState *bus); + +void can_sja_disconnect(CanSJA1000State *s); + +int can_sja_init(CanSJA1000State *s, CanSJAIrqRaiseLower *irq_raise, + CanSJAIrqRaiseLower *irq_lower, void *irq_opaque); + +void can_sja_exit(CanSJA1000State *s); + +int can_sja_can_receive(CanBusClientState *client); + +ssize_t can_sja_receive(CanBusClientState *client, + const qemu_can_frame *frames, size_t frames_cnt); + +extern const VMStateDescription vmstate_can_sja; + +#endif -- 2.11.0