On Thu, Feb 28, 2019 at 09:47:57PM +0800, Yi Sun wrote: > This patch adds an option to provide flexibility for user to expose > Scalable Mode to guest. User could expose Scalable Mode to guest by > the config as below: > > "-device intel-iommu,caching-mode=on,scalable-mode=on" > > The Linux iommu driver has supported scalable mode. Please refer below > patch set: > > https://www.spinics.net/lists/kernel/msg2985279.html > > Signed-off-by: Liu, Yi L <yi.l....@intel.com> > Signed-off-by: Yi Sun <yi.y....@linux.intel.com> > --- > v2: > - rename "scalable-mode" to "x-scalable-mode". > - remove caching_mode check when scalable_mode is set. > - check dma_drain check when scalable_mode is set. This is requested > by spec. > - remove redundant macros. > --- > hw/i386/intel_iommu.c | 24 ++++++++++++++++++++++++ > hw/i386/intel_iommu_internal.h | 4 ++++ > include/hw/i386/intel_iommu.h | 3 ++- > 3 files changed, 30 insertions(+), 1 deletion(-) > > diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c > index d1eb0c5..ec7722d 100644 > --- a/hw/i386/intel_iommu.c > +++ b/hw/i386/intel_iommu.c > @@ -1733,6 +1733,9 @@ static void vtd_root_table_setup(IntelIOMMUState *s) > { > s->root = vtd_get_quad_raw(s, DMAR_RTADDR_REG); > s->root_extended = s->root & VTD_RTADDR_RTT; > + if (s->scalable_mode) { > + s->root_scalable = s->root & VTD_RTADDR_SMT; > + } > s->root &= VTD_RTADDR_ADDR_MASK(s->aw_bits); > > trace_vtd_reg_dmar_root(s->root, s->root_extended); > @@ -2442,6 +2445,17 @@ static bool vtd_process_inv_desc(IntelIOMMUState *s) > } > break; > > + /* > + * TODO: the entity of below two cases will be implemented in future > series. > + * To make guest (which integrates scalable mode support patch set in > + * iommu driver) work, just return true is enough so far. > + */ > + case VTD_INV_DESC_PC: > + break; > + > + case VTD_INV_DESC_PIOTLB: > + break; > + > case VTD_INV_DESC_WAIT: > trace_vtd_inv_desc("wait", inv_desc.hi, inv_desc.lo); > if (!vtd_process_wait_desc(s, &inv_desc)) { > @@ -3006,6 +3020,7 @@ static Property vtd_properties[] = { > DEFINE_PROP_UINT8("aw-bits", IntelIOMMUState, aw_bits, > VTD_HOST_ADDRESS_WIDTH), > DEFINE_PROP_BOOL("caching-mode", IntelIOMMUState, caching_mode, FALSE), > + DEFINE_PROP_BOOL("x-scalable-mode", IntelIOMMUState, scalable_mode, > FALSE), > DEFINE_PROP_BOOL("dma-drain", IntelIOMMUState, dma_drain, true), > DEFINE_PROP_END_OF_LIST(), > }; > @@ -3540,6 +3555,15 @@ static void vtd_init(IntelIOMMUState *s) > s->cap |= VTD_CAP_CM; > } > > + /* TODO: read cap/ecap from host to decide which cap to be exposed. */ > + if (s->scalable_mode) { > + if (!s->dma_drain) { > + error_report("Need to set dma_drain for scalable mode"); > + exit(1); > + }
This patch looks mostly good to me, only that can we move this check to vtd_decide_config()? That's where most similar checks are done. > + s->ecap |= VTD_ECAP_SMTS | VTD_ECAP_SRS | VTD_ECAP_SLTS; > + } > + > vtd_reset_caches(s); > > /* Define registers with default values and bit semantics */ > diff --git a/hw/i386/intel_iommu_internal.h b/hw/i386/intel_iommu_internal.h > index 016fa4c..1160618 100644 > --- a/hw/i386/intel_iommu_internal.h > +++ b/hw/i386/intel_iommu_internal.h > @@ -190,7 +190,9 @@ > #define VTD_ECAP_EIM (1ULL << 4) > #define VTD_ECAP_PT (1ULL << 6) > #define VTD_ECAP_MHMV (15ULL << 20) > +#define VTD_ECAP_SRS (1ULL << 31) > #define VTD_ECAP_SMTS (1ULL << 43) > +#define VTD_ECAP_SLTS (1ULL << 46) > > /* CAP_REG */ > /* (offset >> 4) << 24 */ > @@ -345,6 +347,8 @@ typedef union VTDInvDesc VTDInvDesc; > #define VTD_INV_DESC_IEC 0x4 /* Interrupt Entry Cache > Invalidate Descriptor */ > #define VTD_INV_DESC_WAIT 0x5 /* Invalidation Wait Descriptor > */ > +#define VTD_INV_DESC_PIOTLB 0x6 /* PASID-IOTLB Invalidate Desc */ > +#define VTD_INV_DESC_PC 0x7 /* PASID-cache Invalidate Desc */ > #define VTD_INV_DESC_NONE 0 /* Not an Invalidate Descriptor > */ > > /* Masks for Invalidation Wait Descriptor*/ > diff --git a/include/hw/i386/intel_iommu.h b/include/hw/i386/intel_iommu.h > index 2877c94..c11e3d5 100644 > --- a/include/hw/i386/intel_iommu.h > +++ b/include/hw/i386/intel_iommu.h > @@ -227,7 +227,8 @@ struct IntelIOMMUState { > uint8_t womask[DMAR_REG_SIZE]; /* WO (write only - read returns 0) */ > uint32_t version; > > - bool caching_mode; /* RO - is cap CM enabled? */ > + bool caching_mode; /* RO - is cap CM enabled? */ > + bool scalable_mode; /* RO - is Scalable Mode supported? */ > > dma_addr_t root; /* Current root table pointer */ > bool root_extended; /* Type of root table (extended or not) > */ > -- > 1.9.1 > Regards, -- Peter Xu