From: Adriana Kobylak <a...@us.ibm.com> The Swift board is an OpenPOWER system hosting POWER processors. Add support for their BMC including the I2C devices as found on HW.
Signed-off-by: Adriana Kobylak <a...@us.ibm.com> Reviewed-by: Cédric Le Goater <c...@kaod.org> --- hw/arm/aspeed.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index e404f8b244a9..51d6b5dd9627 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -73,6 +73,17 @@ struct AspeedBoardState { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +/* Swift hardware value: 0xF11AD206 */ +#define SWIFT_BMC_HW_STRAP1 ( \ + AST2500_HW_STRAP1_DEFAULTS | \ + SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ + SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ + SCU_AST2500_HW_STRAP_UART_DEBUG | \ + SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ + SCU_H_PLL_BYPASS_EN | \ + SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ + SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) + /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 @@ -294,6 +305,35 @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc) i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); } +static void swift_bmc_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + + /* The swift board expects a TMP275 but a TMP105 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48); + /* The swift board expects a pca9551 but a pca9552 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60); + + /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60); + + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c); + /* The swift board expects a pca9539 but a pca9552 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74); + + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c); + /* The swift board expects a pca9539 but a pca9552 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552", + 0x74); + + /* The swift board expects a TMP275 but a TMP105 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a); +} + static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; @@ -384,6 +424,16 @@ static const AspeedBoardConfig aspeed_boards[] = { .num_cs = 2, .i2c_init = romulus_bmc_i2c_init, .ram = 512 * MiB, + }, { + .name = MACHINE_TYPE_NAME("swift-bmc"), + .desc = "OpenPOWER Swift BMC (ARM1176)", + .soc_name = "ast2500-a1", + .hw_strap1 = SWIFT_BMC_HW_STRAP1, + .fmc_model = "mx66l1g45g", + .spi_model = "mx66l1g45g", + .num_cs = 2, + .i2c_init = swift_bmc_i2c_init, + .ram = 512 * MiB, }, { .name = MACHINE_TYPE_NAME("witherspoon-bmc"), .desc = "OpenPOWER Witherspoon BMC (ARM1176)", -- 2.21.0