Hi Shameer, On 8/13/19 11:05 PM, Shameer Kolothum wrote: > For machines 4.2 or higher with ACPI boot use GED for system_powerdown > event instead of GPIO. Guest boot with DT still uses GPIO. > > Signed-off-by: Shameer Kolothum <shameerali.kolothum.th...@huawei.com> Reviewed-by: Eric Auger <eric.au...@redhat.com>
Eric > --- > v8 --> v9 > -Re-arranged patches 8 & 9 from v8 based on Igor's comments. > > v7 --> v8 > -Retained gpio based system_powerdown support for machines < 4.2. > -Reuse of virt_powerdown_req() for ACPI GED use. > -Dropped Eric's R-by for now because of above. > > --- > hw/acpi/generic_event_device.c | 8 ++++++++ > hw/arm/virt-acpi-build.c | 6 +++--- > hw/arm/virt.c | 16 +++++++++++----- > include/hw/acpi/acpi_dev_interface.h | 1 + > include/hw/acpi/generic_event_device.h | 3 +++ > 5 files changed, 26 insertions(+), 8 deletions(-) > > diff --git a/hw/acpi/generic_event_device.c b/hw/acpi/generic_event_device.c > index f4c23470c2..d6d7b28cfd 100644 > --- a/hw/acpi/generic_event_device.c > +++ b/hw/acpi/generic_event_device.c > @@ -19,6 +19,7 @@ > > static const uint32_t ged_supported_events[] = { > ACPI_GED_MEM_HOTPLUG_EVT, > + ACPI_GED_PWR_DOWN_EVT, > }; > > /* > @@ -103,6 +104,11 @@ void build_ged_aml(Aml *table, const char *name, > HotplugHandler *hotplug_dev, > aml_append(if_ctx, aml_call0(MEMORY_DEVICES_CONTAINER "." > MEMORY_SLOT_SCAN_METHOD)); > break; > + case ACPI_GED_PWR_DOWN_EVT: > + aml_append(if_ctx, > + aml_notify(aml_name(ACPI_POWER_BUTTON_DEVICE), > + aml_int(0x80))); > + break; > default: > /* > * Please make sure all the events in ged_supported_events[] > @@ -189,6 +195,8 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, > AcpiEventStatusBits ev) > > if (ev & ACPI_MEMORY_HOTPLUG_STATUS) { > sel = ACPI_GED_MEM_HOTPLUG_EVT; > + } else if (ev & ACPI_POWER_DOWN_STATUS) { > + sel = ACPI_GED_PWR_DOWN_EVT; > } else { > /* Unknown event. Return without generating interrupt. */ > warn_report("GED: Unsupported event %d. No irq injected", ev); > diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c > index 6d697af2df..61b399dc58 100644 > --- a/hw/arm/virt-acpi-build.c > +++ b/hw/arm/virt-acpi-build.c > @@ -49,7 +49,6 @@ > #include "kvm_arm.h" > > #define ARM_SPI_BASE 32 > -#define ACPI_POWER_BUTTON_DEVICE "PWRB" > > static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus) > { > @@ -739,13 +738,14 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > VirtMachineState *vms) > (irqmap[VIRT_MMIO] + ARM_SPI_BASE), > NUM_VIRTIO_TRANSPORTS); > acpi_dsdt_add_pci(scope, memmap, (irqmap[VIRT_PCIE] + ARM_SPI_BASE), > vms->highmem, vms->highmem_ecam); > - acpi_dsdt_add_gpio(scope, &memmap[VIRT_GPIO], > - (irqmap[VIRT_GPIO] + ARM_SPI_BASE)); > if (vms->acpi_dev) { > build_ged_aml(scope, "\\_SB."GED_DEVICE, > HOTPLUG_HANDLER(vms->acpi_dev), > irqmap[VIRT_ACPI_GED] + ARM_SPI_BASE, > AML_SYSTEM_MEMORY, > memmap[VIRT_ACPI_GED].base); > + } else { > + acpi_dsdt_add_gpio(scope, &memmap[VIRT_GPIO], > + (irqmap[VIRT_GPIO] + ARM_SPI_BASE)); > } > > if (vms->acpi_dev && ms->ram_slots) { > diff --git a/hw/arm/virt.c b/hw/arm/virt.c > index 0e75213b44..d49e1a583c 100644 > --- a/hw/arm/virt.c > +++ b/hw/arm/virt.c > @@ -528,7 +528,7 @@ static inline DeviceState > *create_acpi_ged(VirtMachineState *vms, qemu_irq *pic) > { > DeviceState *dev; > int irq = vms->irqmap[VIRT_ACPI_GED]; > - uint32_t event = ACPI_GED_MEM_HOTPLUG_EVT; > + uint32_t event = ACPI_GED_MEM_HOTPLUG_EVT | ACPI_GED_PWR_DOWN_EVT; > > dev = qdev_create(NULL, TYPE_ACPI_GED); > qdev_prop_set_uint32(dev, "ged-event", event); > @@ -783,8 +783,14 @@ static void create_rtc(const VirtMachineState *vms, > qemu_irq *pic) > static DeviceState *gpio_key_dev; > static void virt_powerdown_req(Notifier *n, void *opaque) > { > - /* use gpio Pin 3 for power button event */ > - qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1); > + VirtMachineState *s = container_of(n, VirtMachineState, > powerdown_notifier); > + > + if (s->acpi_dev) { > + acpi_send_event(s->acpi_dev, ACPI_POWER_DOWN_STATUS); > + } else { > + /* use gpio Pin 3 for power button event */ > + qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1); > + } > } > > static void create_gpio(const VirtMachineState *vms, qemu_irq *pic) > @@ -1712,10 +1718,10 @@ static void machvirt_init(MachineState *machine) > > create_pcie(vms, pic); > > - create_gpio(vms, pic); > - > if (has_ged && aarch64 && firmware_loaded && acpi_enabled) { > vms->acpi_dev = create_acpi_ged(vms, pic); > + } else { > + create_gpio(vms, pic); > } > > /* connect powerdown request */ > diff --git a/include/hw/acpi/acpi_dev_interface.h > b/include/hw/acpi/acpi_dev_interface.h > index 43ff119179..adcb3a816c 100644 > --- a/include/hw/acpi/acpi_dev_interface.h > +++ b/include/hw/acpi/acpi_dev_interface.h > @@ -11,6 +11,7 @@ typedef enum { > ACPI_MEMORY_HOTPLUG_STATUS = 8, > ACPI_NVDIMM_HOTPLUG_STATUS = 16, > ACPI_VMGENID_CHANGE_STATUS = 32, > + ACPI_POWER_DOWN_STATUS = 64, > } AcpiEventStatusBits; > > #define TYPE_ACPI_DEVICE_IF "acpi-device-interface" > diff --git a/include/hw/acpi/generic_event_device.h > b/include/hw/acpi/generic_event_device.h > index 2049e8d873..d157eac088 100644 > --- a/include/hw/acpi/generic_event_device.h > +++ b/include/hw/acpi/generic_event_device.h > @@ -62,6 +62,8 @@ > #include "hw/sysbus.h" > #include "hw/acpi/memory_hotplug.h" > > +#define ACPI_POWER_BUTTON_DEVICE "PWRB" > + > #define TYPE_ACPI_GED "acpi-ged" > #define ACPI_GED(obj) \ > OBJECT_CHECK(AcpiGedState, (obj), TYPE_ACPI_GED) > @@ -79,6 +81,7 @@ > * through GED. > */ > #define ACPI_GED_MEM_HOTPLUG_EVT 0x1 > +#define ACPI_GED_PWR_DOWN_EVT 0x2 > > typedef struct GEDState { > MemoryRegion io; >