On Mon, 16 Mar 2020 01:03:46 +0100
Philippe Mathieu-Daudé <phi...@redhat.com> wrote:
> Signed-off-by: Philippe Mathieu-Daudé <phi...@redhat.com>
Acked-by: Igor Mammedov <imamm...@redhat.com>
> ---
> qapi/machine.json | 154 +++++++++++++++++++++++++++
> qapi/misc.json | 154 ---------------------------
> include/hw/acpi/acpi_dev_interface.h | 2 +-
> hw/acpi/core.c | 2 +-
> hw/acpi/cpu.c | 2 +-
> hw/acpi/memory_hotplug.c | 2 +-
> 6 files changed, 158 insertions(+), 158 deletions(-)
>
> diff --git a/qapi/machine.json b/qapi/machine.json
> index 1a2a4b0d48..f77ee63730 100644
> --- a/qapi/machine.json
> +++ b/qapi/machine.json
> @@ -1018,3 +1018,157 @@
> ##
> { 'event': 'BALLOON_CHANGE',
> 'data': { 'actual': 'int' } }
> +
> +##
> +# @AcpiTableOptions:
> +#
> +# Specify an ACPI table on the command line to load.
> +#
> +# At most one of @file and @data can be specified. The list of files
> specified
> +# by any one of them is loaded and concatenated in order. If both are
> omitted,
> +# @data is implied.
> +#
> +# Other fields / optargs can be used to override fields of the generic ACPI
> +# table header; refer to the ACPI specification 5.0, section 5.2.6 System
> +# Description Table Header. If a header field is not overridden, then the
> +# corresponding value from the concatenated blob is used (in case of @file),
> or
> +# it is filled in with a hard-coded value (in case of @data).
> +#
> +# String fields are copied into the matching ACPI member from lowest address
> +# upwards, and silently truncated / NUL-padded to length.
> +#
> +# @sig: table signature / identifier (4 bytes)
> +#
> +# @rev: table revision number (dependent on signature, 1 byte)
> +#
> +# @oem_id: OEM identifier (6 bytes)
> +#
> +# @oem_table_id: OEM table identifier (8 bytes)
> +#
> +# @oem_rev: OEM-supplied revision number (4 bytes)
> +#
> +# @asl_compiler_id: identifier of the utility that created the table
> +# (4 bytes)
> +#
> +# @asl_compiler_rev: revision number of the utility that created the
> +# table (4 bytes)
> +#
> +# @file: colon (:) separated list of pathnames to load and
> +# concatenate as table data. The resultant binary blob is expected to
> +# have an ACPI table header. At least one file is required. This field
> +# excludes @data.
> +#
> +# @data: colon (:) separated list of pathnames to load and
> +# concatenate as table data. The resultant binary blob must not have
> an
> +# ACPI table header. At least one file is required. This field
> excludes
> +# @file.
> +#
> +# Since: 1.5
> +##
> +{ 'struct': 'AcpiTableOptions',
> + 'data': {
> + '*sig': 'str',
> + '*rev': 'uint8',
> + '*oem_id': 'str',
> + '*oem_table_id': 'str',
> + '*oem_rev': 'uint32',
> + '*asl_compiler_id': 'str',
> + '*asl_compiler_rev': 'uint32',
> + '*file': 'str',
> + '*data': 'str' }}
> +
> +##
> +# @MEM_UNPLUG_ERROR:
> +#
> +# Emitted when memory hot unplug error occurs.
> +#
> +# @device: device name
> +#
> +# @msg: Informative message
> +#
> +# Since: 2.4
> +#
> +# Example:
> +#
> +# <- { "event": "MEM_UNPLUG_ERROR"
> +# "data": { "device": "dimm1",
> +# "msg": "acpi: device unplug for unsupported device"
> +# },
> +# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
> +#
> +##
> +{ 'event': 'MEM_UNPLUG_ERROR',
> + 'data': { 'device': 'str', 'msg': 'str' } }
> +
> +##
> +# @ACPISlotType:
> +#
> +# @DIMM: memory slot
> +# @CPU: logical CPU slot (since 2.7)
> +##
> +{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] }
> +
> +##
> +# @ACPIOSTInfo:
> +#
> +# OSPM Status Indication for a device
> +# For description of possible values of @source and @status fields
> +# see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec.
> +#
> +# @device: device ID associated with slot
> +#
> +# @slot: slot ID, unique per slot of a given @slot-type
> +#
> +# @slot-type: type of the slot
> +#
> +# @source: an integer containing the source event
> +#
> +# @status: an integer containing the status code
> +#
> +# Since: 2.1
> +##
> +{ 'struct': 'ACPIOSTInfo',
> + 'data' : { '*device': 'str',
> + 'slot': 'str',
> + 'slot-type': 'ACPISlotType',
> + 'source': 'int',
> + 'status': 'int' } }
> +
> +##
> +# @query-acpi-ospm-status:
> +#
> +# Return a list of ACPIOSTInfo for devices that support status
> +# reporting via ACPI _OST method.
> +#
> +# Since: 2.1
> +#
> +# Example:
> +#
> +# -> { "execute": "query-acpi-ospm-status" }
> +# <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM",
> "source": 1, "status": 0},
> +# { "slot": "1", "slot-type": "DIMM", "source": 0,
> "status": 0},
> +# { "slot": "2", "slot-type": "DIMM", "source": 0,
> "status": 0},
> +# { "slot": "3", "slot-type": "DIMM", "source": 0,
> "status": 0}
> +# ]}
> +#
> +##
> +{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] }
> +
> +##
> +# @ACPI_DEVICE_OST:
> +#
> +# Emitted when guest executes ACPI _OST method.
> +#
> +# @info: OSPM Status Indication
> +#
> +# Since: 2.1
> +#
> +# Example:
> +#
> +# <- { "event": "ACPI_DEVICE_OST",
> +# "data": { "device": "d1", "slot": "0",
> +# "slot-type": "DIMM", "source": 1, "status": 0 } }
> +#
> +##
> +{ 'event': 'ACPI_DEVICE_OST',
> + 'data': { 'info': 'ACPIOSTInfo' } }
> diff --git a/qapi/misc.json b/qapi/misc.json
> index 8c02870227..3d9d7327fe 100644
> --- a/qapi/misc.json
> +++ b/qapi/misc.json
> @@ -999,64 +999,6 @@
> ##
> { 'command': 'query-fdsets', 'returns': ['FdsetInfo'] }
>
> -##
> -# @AcpiTableOptions:
> -#
> -# Specify an ACPI table on the command line to load.
> -#
> -# At most one of @file and @data can be specified. The list of files
> specified
> -# by any one of them is loaded and concatenated in order. If both are
> omitted,
> -# @data is implied.
> -#
> -# Other fields / optargs can be used to override fields of the generic ACPI
> -# table header; refer to the ACPI specification 5.0, section 5.2.6 System
> -# Description Table Header. If a header field is not overridden, then the
> -# corresponding value from the concatenated blob is used (in case of @file),
> or
> -# it is filled in with a hard-coded value (in case of @data).
> -#
> -# String fields are copied into the matching ACPI member from lowest address
> -# upwards, and silently truncated / NUL-padded to length.
> -#
> -# @sig: table signature / identifier (4 bytes)
> -#
> -# @rev: table revision number (dependent on signature, 1 byte)
> -#
> -# @oem_id: OEM identifier (6 bytes)
> -#
> -# @oem_table_id: OEM table identifier (8 bytes)
> -#
> -# @oem_rev: OEM-supplied revision number (4 bytes)
> -#
> -# @asl_compiler_id: identifier of the utility that created the table
> -# (4 bytes)
> -#
> -# @asl_compiler_rev: revision number of the utility that created the
> -# table (4 bytes)
> -#
> -# @file: colon (:) separated list of pathnames to load and
> -# concatenate as table data. The resultant binary blob is expected to
> -# have an ACPI table header. At least one file is required. This field
> -# excludes @data.
> -#
> -# @data: colon (:) separated list of pathnames to load and
> -# concatenate as table data. The resultant binary blob must not have
> an
> -# ACPI table header. At least one file is required. This field
> excludes
> -# @file.
> -#
> -# Since: 1.5
> -##
> -{ 'struct': 'AcpiTableOptions',
> - 'data': {
> - '*sig': 'str',
> - '*rev': 'uint8',
> - '*oem_id': 'str',
> - '*oem_table_id': 'str',
> - '*oem_rev': 'uint32',
> - '*asl_compiler_id': 'str',
> - '*asl_compiler_rev': 'uint32',
> - '*file': 'str',
> - '*data': 'str' }}
> -
> ##
> # @CommandLineParameterType:
> #
> @@ -1249,102 +1191,6 @@
> ##
> { 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] }
>
> -##
> -# @MEM_UNPLUG_ERROR:
> -#
> -# Emitted when memory hot unplug error occurs.
> -#
> -# @device: device name
> -#
> -# @msg: Informative message
> -#
> -# Since: 2.4
> -#
> -# Example:
> -#
> -# <- { "event": "MEM_UNPLUG_ERROR"
> -# "data": { "device": "dimm1",
> -# "msg": "acpi: device unplug for unsupported device"
> -# },
> -# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
> -#
> -##
> -{ 'event': 'MEM_UNPLUG_ERROR',
> - 'data': { 'device': 'str', 'msg': 'str' } }
> -
> -##
> -# @ACPISlotType:
> -#
> -# @DIMM: memory slot
> -# @CPU: logical CPU slot (since 2.7)
> -##
> -{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] }
> -
> -##
> -# @ACPIOSTInfo:
> -#
> -# OSPM Status Indication for a device
> -# For description of possible values of @source and @status fields
> -# see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec.
> -#
> -# @device: device ID associated with slot
> -#
> -# @slot: slot ID, unique per slot of a given @slot-type
> -#
> -# @slot-type: type of the slot
> -#
> -# @source: an integer containing the source event
> -#
> -# @status: an integer containing the status code
> -#
> -# Since: 2.1
> -##
> -{ 'struct': 'ACPIOSTInfo',
> - 'data' : { '*device': 'str',
> - 'slot': 'str',
> - 'slot-type': 'ACPISlotType',
> - 'source': 'int',
> - 'status': 'int' } }
> -
> -##
> -# @query-acpi-ospm-status:
> -#
> -# Return a list of ACPIOSTInfo for devices that support status
> -# reporting via ACPI _OST method.
> -#
> -# Since: 2.1
> -#
> -# Example:
> -#
> -# -> { "execute": "query-acpi-ospm-status" }
> -# <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM",
> "source": 1, "status": 0},
> -# { "slot": "1", "slot-type": "DIMM", "source": 0,
> "status": 0},
> -# { "slot": "2", "slot-type": "DIMM", "source": 0,
> "status": 0},
> -# { "slot": "3", "slot-type": "DIMM", "source": 0,
> "status": 0}
> -# ]}
> -#
> -##
> -{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] }
> -
> -##
> -# @ACPI_DEVICE_OST:
> -#
> -# Emitted when guest executes ACPI _OST method.
> -#
> -# @info: OSPM Status Indication
> -#
> -# Since: 2.1
> -#
> -# Example:
> -#
> -# <- { "event": "ACPI_DEVICE_OST",
> -# "data": { "device": "d1", "slot": "0",
> -# "slot-type": "DIMM", "source": 1, "status": 0 } }
> -#
> -##
> -{ 'event': 'ACPI_DEVICE_OST',
> - 'data': { 'info': 'ACPIOSTInfo' } }
> -
> ##
> # @ReplayMode:
> #
> diff --git a/include/hw/acpi/acpi_dev_interface.h
> b/include/hw/acpi/acpi_dev_interface.h
> index a2a12af9b9..a1b63d51db 100644
> --- a/include/hw/acpi/acpi_dev_interface.h
> +++ b/include/hw/acpi/acpi_dev_interface.h
> @@ -1,7 +1,7 @@
> #ifndef ACPI_DEV_INTERFACE_H
> #define ACPI_DEV_INTERFACE_H
>
> -#include "qapi/qapi-types-misc.h"
> +#include "qapi/qapi-types-machine.h"
> #include "qom/object.h"
> #include "hw/boards.h"
> #include "hw/qdev-core.h"
> diff --git a/hw/acpi/core.c b/hw/acpi/core.c
> index 45cbed49ab..4f8d90f50b 100644
> --- a/hw/acpi/core.c
> +++ b/hw/acpi/core.c
> @@ -27,7 +27,7 @@
> #include "qapi/error.h"
> #include "qapi/opts-visitor.h"
> #include "qapi/qapi-events-run-state.h"
> -#include "qapi/qapi-visit-misc.h"
> +#include "qapi/qapi-visit-machine.h"
> #include "qemu/error-report.h"
> #include "qemu/module.h"
> #include "qemu/option.h"
> diff --git a/hw/acpi/cpu.c b/hw/acpi/cpu.c
> index e2c957ce00..8be15db96d 100644
> --- a/hw/acpi/cpu.c
> +++ b/hw/acpi/cpu.c
> @@ -3,7 +3,7 @@
> #include "migration/vmstate.h"
> #include "hw/acpi/cpu.h"
> #include "qapi/error.h"
> -#include "qapi/qapi-events-misc.h"
> +#include "qapi/qapi-events-machine.h"
> #include "trace.h"
> #include "sysemu/numa.h"
>
> diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
> index 8d2e82240f..aa454f5cb2 100644
> --- a/hw/acpi/memory_hotplug.c
> +++ b/hw/acpi/memory_hotplug.c
> @@ -7,7 +7,7 @@
> #include "migration/vmstate.h"
> #include "trace.h"
> #include "qapi/error.h"
> -#include "qapi/qapi-events-misc.h"
> +#include "qapi/qapi-events-machine.h"
>
> #define MEMORY_SLOTS_NUMBER "MDNR"
> #define MEMORY_HOTPLUG_IO_REGION "HPMR"
