On Fri, Aug 14, 2020 at 9:45 AM Bin Meng <bmeng...@gmail.com> wrote:
>
> From: Bin Meng <bin.m...@windriver.com>
>
> Microchip PolarFire SoC MMUART is ns16550 compatible, with some
> additional registers. Create a simple MMUART model built on top
> of the existing ns16550 model.
>
> Signed-off-by: Bin Meng <bin.m...@windriver.com>
> ---
>
>  MAINTAINERS                         |  2 +
>  hw/char/Kconfig                     |  3 ++
>  hw/char/Makefile.objs               |  1 +
>  hw/char/mchp_pfsoc_mmuart.c         | 82 
> +++++++++++++++++++++++++++++++++++++
>  include/hw/char/mchp_pfsoc_mmuart.h | 61 +++++++++++++++++++++++++++
>  5 files changed, 149 insertions(+)
>  create mode 100644 hw/char/mchp_pfsoc_mmuart.c
>  create mode 100644 include/hw/char/mchp_pfsoc_mmuart.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8716cb6..e51edac 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1319,7 +1319,9 @@ M: Bin Meng <bin.m...@windriver.com>
>  L: qemu-ri...@nongnu.org
>  S: Supported
>  F: hw/riscv/microchip_pfsoc.c
> +F: hw/char/mchp_pfsoc_mmuart.c
>  F: include/hw/riscv/microchip_pfsoc.h
> +F: include/hw/char/mchp_pfsoc_mmuart.h
>
>  RX Machines
>  -----------
> diff --git a/hw/char/Kconfig b/hw/char/Kconfig
> index b7e0e4d..1d64555 100644
> --- a/hw/char/Kconfig
> +++ b/hw/char/Kconfig
> @@ -52,3 +52,6 @@ config RENESAS_SCI
>
>  config AVR_USART
>      bool
> +
> +config MCHP_PFSOC_MMUART
> +    bool
> diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
> index bf177ac..f705845 100644
> --- a/hw/char/Makefile.objs
> +++ b/hw/char/Makefile.objs
> @@ -33,6 +33,7 @@ common-obj-$(CONFIG_LM32) += lm32_juart.o
>  common-obj-$(CONFIG_LM32) += lm32_uart.o
>  common-obj-$(CONFIG_MILKYMIST) += milkymist-uart.o
>  common-obj-$(CONFIG_SCLPCONSOLE) += sclpconsole.o sclpconsole-lm.o
> +common-obj-$(CONFIG_MCHP_PFSOC_MMUART) += mchp_pfsoc_mmuart.o
>
>  obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o
>  obj-$(CONFIG_PSERIES) += spapr_vty.o
> diff --git a/hw/char/mchp_pfsoc_mmuart.c b/hw/char/mchp_pfsoc_mmuart.c
> new file mode 100644
> index 0000000..9984acc
> --- /dev/null
> +++ b/hw/char/mchp_pfsoc_mmuart.c
> @@ -0,0 +1,82 @@
> +/*
> + * Microchip PolarFire SoC MMUART emulation
> + *
> + * Copyright (c) 2020 Wind River Systems, Inc.
> + *
> + * Author:
> + *   Bin Meng <bin.m...@windriver.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 or
> + * (at your option) version 3 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "chardev/char.h"
> +#include "exec/address-spaces.h"
> +#include "hw/char/mchp_pfsoc_mmuart.h"
> +
> +static uint64_t mchp_pfsoc_mmuart_read(void *opaque, hwaddr addr, unsigned 
> size)
> +{
> +    MchpPfSoCMMUartState *s = opaque;
> +
> +    if ((addr % sizeof(uint32_t)) || (addr >= 0x34)) {

You can specify impl.min_access_size and impl.max_access_size as part
of MemoryRegionOps so the allignment check isn't required here.

> +        qemu_log_mask(LOG_GUEST_ERROR, "%s: read: addr=0x%" HWADDR_PRIx "\n",
> +                      __func__, addr);
> +        return 0;
> +    }
> +
> +    return s->reg[addr / sizeof(uint32_t)];
> +}
> +
> +static void mchp_pfsoc_mmuart_write(void *opaque, hwaddr addr,
> +                                    uint64_t value, unsigned size)
> +{
> +    MchpPfSoCMMUartState *s = opaque;
> +    uint32_t val32 = (uint32_t)value;
> +
> +    if ((addr % sizeof(uint32_t)) || (addr >= 0x34)) {

Same comment here about allignment.

Alistair

> +        qemu_log_mask(LOG_GUEST_ERROR, "%s: bad write: addr=0x%" HWADDR_PRIx
> +                      " v=0x%x\n", __func__, addr, val32);
> +        return;
> +    }
> +
> +    s->reg[addr / sizeof(uint32_t)] = val32;
> +}
> +
> +static const MemoryRegionOps mchp_pfsoc_mmuart_ops = {
> +    .read = mchp_pfsoc_mmuart_read,
> +    .write = mchp_pfsoc_mmuart_write,
> +    .endianness = DEVICE_LITTLE_ENDIAN,
> +};
> +
> +MchpPfSoCMMUartState *mchp_pfsoc_mmuart_create(MemoryRegion *sysmem,
> +    hwaddr base, qemu_irq irq, Chardev *chr)
> +{
> +    MchpPfSoCMMUartState *s;
> +
> +    s = g_new0(MchpPfSoCMMUartState, 1);
> +
> +    memory_region_init_io(&s->iomem, NULL, &mchp_pfsoc_mmuart_ops, s,
> +                          "mchp.pfsoc.mmuart", 0x1000);
> +
> +    s->base = base;
> +    s->irq = irq;
> +
> +    s->serial = serial_mm_init(sysmem, base, 2, irq, 399193, chr,
> +                               DEVICE_LITTLE_ENDIAN);
> +
> +    memory_region_add_subregion(sysmem, base + 0x20, &s->iomem);
> +
> +    return s;
> +}
> diff --git a/include/hw/char/mchp_pfsoc_mmuart.h 
> b/include/hw/char/mchp_pfsoc_mmuart.h
> new file mode 100644
> index 0000000..f619902
> --- /dev/null
> +++ b/include/hw/char/mchp_pfsoc_mmuart.h
> @@ -0,0 +1,61 @@
> +/*
> + * Microchip PolarFire SoC MMUART emulation
> + *
> + * Copyright (c) 2020 Wind River Systems, Inc.
> + *
> + * Author:
> + *   Bin Meng <bin.m...@windriver.com>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a 
> copy
> + * of this software and associated documentation files (the "Software"), to 
> deal
> + * in the Software without restriction, including without limitation the 
> rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
> FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#ifndef HW_MCHP_PFSOC_MMUART_H
> +#define HW_MCHP_PFSOC_MMUART_H
> +
> +#include "hw/char/serial.h"
> +
> +#define MCHP_PFSOC_MMUART_REG_SIZE  52
> +
> +typedef struct MchpPfSoCMMUartState {
> +    MemoryRegion iomem;
> +    hwaddr base;
> +    qemu_irq irq;
> +
> +    SerialMM *serial;
> +
> +    uint32_t reg[MCHP_PFSOC_MMUART_REG_SIZE / sizeof(uint32_t)];
> +} MchpPfSoCMMUartState;
> +
> +/**
> + * mchp_pfsoc_mmuart_create - Create a Microchip PolarFire SoC MMUART
> + *
> + * This is a helper routine for board to create a MMUART device that is
> + * compatible with Microchip PolarFire SoC.
> + *
> + * @sysmem: system memory region to map
> + * @base: base address of the MMUART registers
> + * @irq: IRQ number of the MMUART device
> + * @chr: character device to associate to
> + *
> + * @return: a pointer to the device specific control structure
> + */
> +MchpPfSoCMMUartState *mchp_pfsoc_mmuart_create(MemoryRegion *sysmem,
> +    hwaddr base, qemu_irq irq, Chardev *chr);
> +
> +#endif /* HW_MCHP_PFSOC_MMUART_H */
> --
> 2.7.4
>
>

Reply via email to