Why? It's all KVM.
Paolo
Il gio 24 dic 2020, 11:58 Philippe Mathieu-Daudé <f4...@amsat.org> ha
scritto:
> On 12/23/20 8:26 PM, Greg Kurz wrote:
> > Linking of the qemu-system-ppc64 fails on a POWER9 host when
> > --without-default-devices is passed to configure:
> >
> > $ ./configure --without-default-devices \
> > --target-list=ppc64-softmmu && make
> >
> > ...
> >
> > libqemu-ppc64-softmmu.fa.p/hw_ppc_e500.c.o: In function
> `ppce500_init_mpic_kvm':
> > /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/e500.c:777: undefined
> reference to `kvm_openpic_connect_vcpu'
> > libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_irq.c.o: In function
> `spapr_irq_check':
> > /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/spapr_irq.c:189: undefined
> reference to `xics_kvm_has_broken_disconnect'
> > libqemu-ppc64-softmmu.fa.p/hw_intc_spapr_xive.c.o: In function
> `spapr_xive_post_load':
> > /home/greg/Work/qemu/qemu-ppc/build/../hw/intc/spapr_xive.c:530:
> undefined reference to `kvmppc_xive_post_load'
> >
> > ... and tons of other symbols belonging to the KVM backend of the
> > openpic, XICS and XIVE interrupt controllers.
> >
> > It turns out that OPENPIC_KVM, XICS_KVM and XIVE_KVM are marked
> > to depend on KVM but this has no effect when minikconf runs in
> > allnoconfig mode. Such reverse dependencies should rather be
> > handled with a 'select' statement, eg.
> >
> > config OPENPIC
> > select OPENPIC_KVM if KVM
> >
> > or even better by getting rid of the intermediate _KVM config
> > and directly checking CONFIG_KVM in the meson.build file:
> >
> > specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
> > if_true: files('openpic_kvm.c'))
> >
> > Go for the latter with OPENPIC, XICS and XIVE. While here also move
> > XIVE_SPAPR to hw/intc/Kconfig where it belongs.
> >
> > This went unnoticed so far because CI doesn't test the build with
> > --without-default-devices and KVM enabled on a POWER host.
> >
> > Signed-off-by: Greg Kurz <gr...@kaod.org>
> > ---
> > v2: - check CONFIG_KVM in the meson.build as suggested by Paolo
> > ---
> > hw/intc/Kconfig | 14 +++++---------
> > hw/intc/meson.build | 9 ++++++---
> > hw/ppc/Kconfig | 15 ---------------
> > 3 files changed, 11 insertions(+), 27 deletions(-)
> >
> > diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig
> > index 468d548ca771..ee60d4bf7857 100644
> > --- a/hw/intc/Kconfig
> > +++ b/hw/intc/Kconfig
> > @@ -30,23 +30,19 @@ config ARM_GIC_KVM
> > default y
> > depends on ARM_GIC && KVM
> >
> > -config OPENPIC_KVM
> > - bool
> > - default y
> > - depends on OPENPIC && KVM
> > -
> > config XICS
> > bool
> > - depends on POWERNV || PSERIES
> >
> > config XICS_SPAPR
> > bool
> > select XICS
> >
> > -config XICS_KVM
> > +config XIVE
> > bool
> > - default y
> > - depends on XICS && KVM
> > +
> > +config XIVE_SPAPR
> > + bool
> > + select XIVE
> >
> > config ALLWINNER_A10_PIC
> > bool
> > diff --git a/hw/intc/meson.build b/hw/intc/meson.build
> > index 68da782ad2c5..b6c9218908e3 100644
> > --- a/hw/intc/meson.build
> > +++ b/hw/intc/meson.build
> > @@ -39,7 +39,8 @@ specific_ss.add(when: 'CONFIG_LOONGSON_LIOINTC',
> if_true: files('loongson_lioint
> > specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_gic.c'))
> > specific_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_intc.c'))
> > specific_ss.add(when: 'CONFIG_OMPIC', if_true: files('ompic.c'))
> > -specific_ss.add(when: 'CONFIG_OPENPIC_KVM', if_true:
> files('openpic_kvm.c'))
> > +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
> > + if_true: files('openpic_kvm.c'))
> > specific_ss.add(when: 'CONFIG_POWERNV', if_true: files('xics_pnv.c',
> 'pnv_xive.c'))
> > specific_ss.add(when: 'CONFIG_PPC_UIC', if_true: files('ppc-uic.c'))
> > specific_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_ic.c',
> 'bcm2836_control.c'))
> > @@ -50,8 +51,10 @@ specific_ss.add(when: 'CONFIG_SH4', if_true:
> files('sh_intc.c'))
> > specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true:
> files('sifive_clint.c'))
> > specific_ss.add(when: 'CONFIG_SIFIVE_PLIC', if_true:
> files('sifive_plic.c'))
> > specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c'))
> > -specific_ss.add(when: 'CONFIG_XICS_KVM', if_true: files('xics_kvm.c'))
> > +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XICS'],
> > + if_true: files('xics_kvm.c'))
> > specific_ss.add(when: 'CONFIG_XICS_SPAPR', if_true:
> files('xics_spapr.c'))
> > specific_ss.add(when: 'CONFIG_XIVE', if_true: files('xive.c'))
> > -specific_ss.add(when: 'CONFIG_XIVE_KVM', if_true:
> files('spapr_xive_kvm.c'))
> > +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XIVE'],
> > + if_true: files('spapr_xive_kvm.c'))
> > specific_ss.add(when: 'CONFIG_XIVE_SPAPR', if_true:
> files('spapr_xive.c'))
> > diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> > index 982d55f5875c..064bd6edd83d 100644
> > --- a/hw/ppc/Kconfig
> > +++ b/hw/ppc/Kconfig
> > @@ -129,21 +129,6 @@ config VIRTEX
> > select XILINX_ETHLITE
> > select FDT_PPC
> >
> > -config XIVE
> > - bool
> > - depends on POWERNV || PSERIES
> > -
> > -config XIVE_SPAPR
> > - bool
> > - default y
> > - depends on PSERIES
> > - select XIVE
> > -
> > -config XIVE_KVM
> > - bool
> > - default y
> > - depends on XIVE_SPAPR && KVM
> > -
>
> Is it possible to split this patch in 2: XICS, XIVE (or 3: same + OPENPIC)?
>
>
