From: Joel Stanley <j...@jms.id.au> This assumes a specially constructued image:
dd if=/dev/zero of=mmc-bootarea.img count=2 bs=1M dd if=u-boot-spl.bin of=mmc-bootarea.img conv=notrunc dd if=u-boot.bin of=mmc-bootarea.img conv=notrunc count=64 bs=1K cat mmc-bootarea.img obmc-phosphor-image.wic > mmc.img truncate --size 16GB mmc.img truncate --size 128MB mmc-bootarea.img For now this still requires a mtd image to load the SPL: qemu-system-arm -M tacoma-bmc -nographic \ -global driver=sd-card,property=emmc,value=true \ -drive file=mmc.img,if=sd,index=2 \ -drive file=mmc-bootarea.img,if=mtd,format=raw Signed-off-by: Joel Stanley <j...@jms.id.au> [clg: - changes on the definition names ] Signed-off-by: Cédric Le Goater <c...@kaod.org> --- include/hw/sd/sd.h | 1 + hw/sd/sd.c | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+) diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h index dfe661079b8a..02cfc8cecfac 100644 --- a/include/hw/sd/sd.h +++ b/include/hw/sd/sd.h @@ -133,6 +133,7 @@ struct SDCardClass { const struct SDProto *proto; uint8_t spec_version; void (*set_csd)(SDState *sd, uint64_t size); + uint32_t (*bootpart_offset)(SDState *sd); }; #define TYPE_SD_BUS "sd-bus" diff --git a/hw/sd/sd.c b/hw/sd/sd.c index d3bda6c2aa6b..e975fcf18512 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -839,9 +839,40 @@ void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert) qemu_set_irq(insert, sd->blk ? blk_is_inserted(sd->blk) : 0); } +/* + * This requires a disk image that has two boot partitions inserted at the + * beginning of it. The size of the boot partitions are configured in the + * ext_csd structure, which is hardcoded in qemu. They are currently set to + * 1MB each. + */ +static uint32_t sd_emmc_bootpart_offset(SDState *sd) +{ + unsigned int access = sd->ext_csd[EXT_CSD_PART_CONFIG] & + EXT_CSD_PART_CONFIG_ACC_MASK; + unsigned int boot_capacity = sd->ext_csd[EXT_CSD_BOOT_MULT] << 17; + + switch (access) { + case EXT_CSD_PART_CONFIG_ACC_DEFAULT: + return boot_capacity * 2; + case EXT_CSD_PART_CONFIG_ACC_BOOT0: + return 0; + case EXT_CSD_PART_CONFIG_ACC_BOOT0 + 1: + return boot_capacity * 1; + default: + g_assert_not_reached(); + } +} + +static uint32_t sd_bootpart_offset(SDState *sd) +{ + SDCardClass *sc = SD_CARD_GET_CLASS(sd); + return sc->bootpart_offset ? sc->bootpart_offset(sd) : 0; +} + static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len) { trace_sdcard_read_block(addr, len); + addr += sd_bootpart_offset(sd); if (!sd->blk || blk_pread(sd->blk, addr, sd->data, len) < 0) { fprintf(stderr, "sd_blk_read: read error on host side\n"); } @@ -850,6 +881,7 @@ static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len) static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len) { trace_sdcard_write_block(addr, len); + addr += sd_bootpart_offset(sd); if (!sd->blk || blk_pwrite(sd->blk, addr, sd->data, len, 0) < 0) { fprintf(stderr, "sd_blk_write: write error on host side\n"); } @@ -2546,6 +2578,7 @@ static void emmc_class_init(ObjectClass *klass, void *data) sc->proto = &sd_proto_emmc; sc->spec_version = SD_PHY_SPECv3_01_VERS; /* eMMC requirement */ sc->set_csd = sd_emmc_set_csd; + sc->bootpart_offset = sd_emmc_bootpart_offset; } static const TypeInfo emmc_info = { -- 2.34.1